• Structural Engineering and Mechanics
• /
• v.82 no.6
• /
• pp.771-783
• /
• 2022

Structural damage identification (SDI) methods have been proposed to monitor the safety of structures. However, the traditional SDI methods using modal parameters, such as natural frequencies and mode shapes, are not sensitive enough to structural damage. To tackle this problem, this paper proposes a new SDI method based on transmissibility assurance criterion (TAC) and weighted Schatten-p norm regularization. Firstly, the transmissibility function (TF) has been proved a useful damage index, which can effectively detect structural damage under unknown excitations. Inspired by the modal assurance criterion (MAC), TF and MAC are combined to construct a new damage index, so called as TAC, which is introduced into the objective function together with modal parameters. In addition, the weighted Schatten-p norm regularization method is adopted to improve the ill-posedness of the SDI inverse problem. To evaluate the effectiveness of the proposed method, some numerical simulations and experimental studies in laboratory are carried out. The results show that the proposed method has a high SDI accuracy, especially for weak damages of structures, it can precisely achieve damage locations and quantifications with a good robustness.

• Journal of Korean Society for Quality Management
• /
• v.23 no.1
• /
• pp.74-94
• /
• 1995

Through the application of Quality Assurance(QA) techniques in R&D activities, we can approach for cost reduction and productivity improvement with high reliability. Application of QA systems in R&D in developed countries were studied, a enquete survey was performed to investigate researcher's understanding of QA in R&D. As a result of this study, it is considered desirable that QA system be applied partially to the feasible work areas at first, and the scope of application be enlarged to extended areas, later. For these aims, various and feasible QA system should be developed and established. As the need for quality assurance in R&D is expected to be increased continuously in the future, it is imperative for us to be prepared for the application of QA system in R&D activities.

• Journal of Korea Society of Industrial Information Systems
• /
• v.8 no.1
• /
• pp.121-130
• /
• 2003

In this paper, we validate MEDIQUAL constructs through different media users in help desk. In a previous paper only two end-users' constructs were used: assurance and responsiveness. In this paper we extended MEDIQUAL constructs to include reliability, empathy, assurance, tangibles, and responsiveness, which are based on the SERVQUAL theory. The results suggested that: 1) five MEDIQUAL constructs were validated through the factor analysis. That is, importance of the constructs have relatively high correlations between measures of the same construct using different methods and low correlations between measures of construct that are expected to differ (Cronbach, 1971; Campbell and Fiske, 1959) 2) five MEDIQUAL constructs are statistically significant on media users' satisfaction in help desk service by regression analysis.

• Advances in concrete construction
• /
• v.1 no.1
• /
• pp.45-63
• /
• 2013

Upon completion of new concrete structures, the achieved construction quality always shows a high scatter and variability, and in severe environments, any weaknesses and deficiencies will soon be revealed whatever durability specifications and materials have been applied. To a certain extent, a probability approach to the durability design can take the high scatter and variability into account. However, numerical solutions alone are not sufficient to ensure the durability and service life of concrete structures in severe environments. In the present paper, the basis for a probability-based durability design is briefly outlined and discussed. As a result, some performance-based durability requirements are specified which are used for quality control and quality assurance during concrete construction. The final documentation of achieved construction quality and compliance with the specified durability are key to any rational approach to more controlled and increased durability. As part of the durability design, a service manual for future condition assessment and preventive maintenance of the structure is also produced. It is such a service manual which helps provide the ultimate basis for achieving a more controlled durability and service life of the given concrete structure in the given environment.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.3
• /
• pp.44-50
• /
• 2019

HNIW is a high energy material and has four crystalline phases, it is known that the thermal properties of the material depend on the crystal phase. In this sturdy, the viscosity, mechanical and burning properties of a solid propellant with nitrate ester polyester(NEPE) system with respect to the crystal phases of HNIW. According to the crystal phase of HNIW, the mechanical properties of the cured propellant did not change considerably, however differences were observed in the burning properties. Considering both a high density and stable burning properties, the optimum crystal phase of HNIW can be identified as the main factor influencing to the NEPE system propellant.

• Journal of Aerospace System Engineering
• /
• v.11 no.2
• /
• pp.30-34
• /
• 2017

This paper is concerned with product assurance for the secondary payload, which is used for technology and science research, in the satellite system, which consists primarily of the spacecraft and the primary payload (a high-resolution optical camera). The Korean satellite development program has successfully insured the safety of the spacecraft and primary payload. However, given the limits of budget and schedule, it is very important to establish adequate product assurance for the secondary payload, which has a lower priority than the spacecraft or primary payload. This paper studies the concept of product assurance for the secondary payload of technological and scientific equipment.

• Journal of the Korean Home Economics Association
• /
• v.35 no.2
• /
• pp.33-47
• /
• 1997

The purpose of the study is to examine the differences between rural and urban in the factors and the level of stress in adolescent, inner control and communication with parents. Also, It is to research the influence of environmental variables, inner control and communication with parents on adolescent's stress in sides of rural and urban. Therefore, I provide needed data in instructing students. For the data set, academic high school students in second grade in a town for rural and Su-Seung gu, Dal-Sugu, chung gu in Dae-gu for urban were chosen. The data were analyzed with the frequency, percentage, factor analysis Mean, S.D, reliability, t-test, regression in use of Spss PC+ Program. The main results are as follow. First, for rural students, stress level is displayed studies, future0affair, life-attitude, companions, self-assurance and home life in order by lower sphere. For urban students, it is displayed future-affair, studies, life-attitude, companions, self-assurance and home life in order by lower shpere. In case of rural "I don't know effective study method" is highly displayed by factors. In case of urban. "I am tired of a competitive life" is highly displayed. The mean of stress level is 3.22 for rural and 3.07 for urban. The differences between rural and urban are showed in self-assurance, studies and companions. Finally when we see the stress generally the stress level is higher in rural high school students than in urban high school students. Second, rural students are lower displayed than urban students in inner control and communication with parents. There is no difference urban students in inner control and communication with parents. There is no difference in communication with a mother. third, influential variables on stress level are inner control, communication with parents, satisfaction with companions and school life as environmental variables in sides of rural and urban. Physical condition is added for rural and sex for urban Finally we get the result that stress level is high in low inner control, poor communication with parents, bad companions and unsatisfied school life for both rural and urban. Bad physical condition for rural and female for urban are added.

• IE interfaces
• /
• v.25 no.2
• /
• pp.178-186
• /
• 2012

The DRAM module is an important part of servers, workstations and personal computer. Its malfunction causes a lot of damage on customer system. Therefore, customers demand the highest quality products. The company applies DRAM module Outgoing Quality Assurance Inspection(OQA) to secures the highest quality. It is the key process to decides shipment of products through sample inspection method with customer oriented tests. High fraction of defectives entering to OQA causes inevitable high quality cost. This article proposes the application of ensemble learning to classify the lot status to minimize the ratio of wrong decision in OQA, observing a potential in reducing the wrong decision.

• Journal of Appropriate Technology
• /
• v.7 no.2
• /
• pp.172-187
• /
• 2021

In remote villages without access to modern IT technology, simple devices such as smartcards can be used to carry out business transactions. These devices typically store multiple business applications from multiple vendors. Although devices must prevent malicious or accidental security breaches among the applications, a secure communication channel between two applications from different vendors is often required. In this paper, first, we propose a method of establishing secure communication channels between applications in embedded operating systems that run on multi-applet smart cards. Second, we enforce the high assurance using an intransitive noninterference security policy. Thirdly, we formalize the method through the Z language and create the formal specification of the proposed secure system. Finally, we verify its correctness using Rushby's unwinding theorem.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.2
• /
• pp.189-196
• /
• 1994

Quality assurance in the process of manufacturing high strengh bolt sets used in the frictional joints of structures in one of important concern to users as well as to manufactures. In case of occurrences of either defective or low-quality products, even if they are quite rare, some systematic means of localizing the cause-characteristics and matching to corresponding production process is necessary. Control chart of torque factor is the primary indicatir in finding defectiveness of the products. Use of correlation diagrams ofnhardness of the bolt set presents in part a way of screening the cause. Retest data of the bolt set provide additional ideas of localizing the cause, for which theoretical background is presented in this regard. A process-characteristics matrix relating the causes of low quality to the corresponding process of manufacturing, which is of prime importance for the feedback control of production, is also proposed. Finally general features of control to assure quality of the set is described.