• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제48권1호
• /
• pp.23-28
• /
• 1999

Electrical breakdown characteristics of liquid nitrogen($LN_2$) used as both coolant and insulator for high $T_c$ superconductor system are very important. This paper presents dynamic breakdown characteristics fo $LN_2$ by quench phenomena of thermal bubble under high electric field. Experimental results revealed dynamic breakdown voltage fell down drastically compared with the static breakdown voltage without the quench. Because of increasing heat power, bubble size becomes big and breakdown voltage decreases. The breakdown voltage mechanism of $LN_2$ depends on thermal bubble effect. In the Electrode arrangement, electrical breakdown voltage of horizontal arrangement appears lower than that of vertical arrangement. Also, we observed the behavior of thermal bubbles in $LN_2$ which were generated after quench using camera.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.322-325
• /
• 2007

Precipitation characteristics of the Fe-36Ni based high strength Invar alloy for power transmission wire was investigated in this study. High strength can be obtained in this alloy through solution hardening, precipitation hardening and strain hardening by cold working. In the present study, ingots of Fe-36Ni based Invar alloys with the contents of C, Mo and V varied. Microstructure observations by OM, SEM, and TEM were carried out to validate the simulation results. BCC phase and $FeNi_3$ phase are also expected at lower temperatures below $500^{\circ}C$. Aging treatments were carried out at temperatures ranging from 400 to $900^{\circ}C$ for time intervals from 3 min to 100hrs. Peak aging condition was obtained as $400^{\circ}C$ and 1 hr. With temperature increased, peak strength was decreased abruptly. Microstructure observation was conducted by optical microscopy, scanning electron microscopy, and transmission electron microscopy.

• Advances in Computational Design
• /
• 제9권1호
• /
• pp.53-71
• /
• 2024

Owing to these mechanical properties, carbon nanotubes have the potential to be employed in many future devices and nanostructured materials. As an example, high Young modulus accompanied by their low density, makes them a good choice for reinforcing material in composites. Therefore, we empathize and manually derive the results which shows the utilized lemma and criterion are believed effective and efficient for aircraft structural analysis of composite and nonlinear scenarios. To be fair, the experiment by numerical computation and calculations were explained the perfectness of the methodology we provided in the research.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.747-750
• /
• 2000

In this work, we investigated the dependence of optical and electrical properties of amorphous hydrogenated SiC (a-SiC:H) films on annealing temperature(T$\sub$a/). The a-SiC:H films were deposited by PECVD(plasma enhanced vapor deposition) on coming glass, p-type Si(100) wafer using SiH$_4$+CH$_4$+N$_2$gas mixture. The experimental results have shown that the optical energy band gap(E$\sub$g/) of the a-SiC thin films unchanged in the range of T$\sub$a/ from 400$^{\circ}C$ to 600$^{\circ}C$. The Raman spectrum of the thin films, annealed at high temperatures, has shown that graphitization of carbon clusters and micro-crystalline silicon occurs. The current-voltage characteristics have shown good electrical properties at the annealed films.

• 한국산업융합학회 논문집
• /
• 제7권4호
• /
• pp.399-405
• /
• 2004

Currently, the use of carbon steel in a high temperature environment, such atomic reactor, increases. Test piece was heated in electric furnace and the prescribed temperature was controlled within ${\pm}1^{\circ}C$. Debris that falls apart from cracked section due to friction is accumulated inside. Then, as it causes fretting corrosion (formation of oxide layer), it contributes to crack closure.

• 전자통신동향분석
• /
• 제36권6호
• /
• pp.13-24
• /
• 2021

Industrial networks has been developing various technologies from fieldbus technology to industrial Ethernet and time-sensitive networking. The industry expects that the 5G mobile network will solve the diverse and highly specific industrial site requirements. Accordingly, 3GPP has been developing standard functions to provide ultra-high reliability, ultra-high speed, ultra-connection, and ultra-low latency services, and 3GPP Rel-16 began developing ultra-low latency and ultra-high reliability communication functions for 5G mobile networks to support vertical industries. In this paper, we show the related standardization trends and requirements to apply industrial IoT service scenarios to 5G mobile networks, and in particular, we introduce 5G system features and extended 5G system architecture to provide time sensitive communication and time synchronization services.

• 대한기계학회논문집B
• /
• 제35권12호
• /
• pp.1309-1316
• /
• 2011

본 논문에서는 올리고-dT 자성입자와 측면방향 자기영동 기술을 기반으로 하는 초고속 RNA 추출칩을 소개한다. 센자성 와이어에 유도된 고구배자장에 의해 RNA가 결합된 올리고-dT 자성입자를 분리함으로써 용해된 혈액으로부터 고속으로 RNA를 추출하였다. 유속이 20 ml/h까지 자성입자를 80% 이상의 효율로 분리할 수 있었으며, 분리시간은 총 1분 이내였다. 추출된 시료로부터 단백질에 대한 RNA 흡광비율(absorbance ratio of RNA to protein: A260/A280)이 1.7 이상임을 확인하였고, 따라서 추출된 RNA가 매우 순수함을 보였다. 추출된 RNA를 사용하여 cDNA 합성과 PCR을 수행하였으며, 이로부터 개발된 초고속 RNA 추출칩이 적은 양의 시료만으로 간편하며 빠르고 정교한 RT-PCR을 수행하는데 실용적임을 확인하였다.

• 생물환경조절학회지
• /
• 제12권3호
• /
• pp.132-138
• /
• 2003

섬쑥부쟁이의 대량번식 체계를 구명하고 발아 및 입 묘율 향상을 위한 기초 자료를 얻기 위해 온도와 광조건, 그리고 priming 처리약제, 처리농도, 처리기간이 발아에 미치는 영향에 대하여 실험한 결과는 다음과 같았다. 온도에 따른 발아율은 20, 25$^{\circ}C$ 처리구가 가장 높았으며 30$^{\circ}C$에서 발아율이 급격히 낮아졌고 35$^{\circ}C$에서는 전혀 발아하지 않았다. 발아개시일은 15$^{\circ}C$에서 가장 늦어졌으며 온도가 높아질수록 빨라지는 경향을 보였으나 높은 온도에서는 쉽게 부패하였다. 발아세는 25$^{\circ}C$에서 가장 높게 나타났으며 15, 20, 30$^{\circ}C$ 순으로 낮이졌다. 굉조건 실험에서 발아율, 발아개시일, 발아세, $T_{50}$ 등이 명 처리에서 증진되는 경향을 보였으나 유의 차는 없었다 Priming 처리기간별로 발아율을 보면 평균적으로 3 시간 처리가 30 분처리보다 높았다. 섬쑥부쟁이 종자에 0.3M $KNO_3+K_3PO_4$를 3시간 처리할 경우 발아율이 83.3%로 가장 높았고 역시 $T_{50}$도 가장 짧았다. $T_{50}$과 발아개시일은 30분 처리가 3시간 처리보다 좋은 결과를 보였으며 모든 priming 처리가 대조구보다 좋은 결과를 보였다. 발아세는 모든 처리가 대조구보다 높았으나 처리시간에 따른 효과가 없었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.359-362
• /
• 1998

Electrical breakdown characteristics of liquid nitrogen(LNd used as both coolant and insulator for high $T_c$ superconductor system is very important. This paper presents dynamic breakdown characteristics of liquid nitrogen by quench penomena of thermal bubble under high electric field. As the result, the breakdown mechanism of $LN_2$ depends on thermal bubble effect. The breakdown voltage decreases slightly with increasing heating. In the Electrode arrangement, electrical breakdown voltage of horizontal arrangement appears lower than that of vertical arrangement.

• The Korean Journal of Ceramics
• /
• 제3권3호
• /
• pp.187-190
• /
• 1997

The aluminum-magnesium (Al-Mg) aklloys have been proved to be an effective solvent for synthesis of cubic-phase boron nitride (cBN) from hexagonal-phase boron nitride (hBN) at the conditions of high pressures and high temperatures (HP/HT). Various kinds of hBN powders having different crystallinity have been tested for cBN synthesis with Al-Mg solvents. The conversion ratio from hBN to cBN and the shape of synthesized cBN crystals appeared to be affected strongly by chemical composition and added amount of Al-Mg solvents as well as crystallinity of BN powders. As the magnesium content increased in the Al-Mg solvents, the conversion ratio increased and the size of cBN crystals became larger. The crystal facets developed well in the specimens with solvents having high Mg content. It was observed that a hBNlongrightarrowcBN transformation occurred more easily in the specimens having well crystallized hBN powders. Amorphous BN having much $B_2O_3$ impurity exhibited a low threshold temperature for transformation to cBN, which was attributed to crystallization of amorphous BN to well crystallized hBN prior to transformation into cBN with help of $B_2O_3$.