• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제54권4호
• /
• pp.166-171
• /
• 2005

Shielding methods on ELF(Extremely Low Frequency) magnetic fields may include the use of induced currents, modification of magnetic field flux patterns using high permeability and/or high conductivity materials, and others. The magnetic shielding properties of enclosures can be utilized to reduce the magnetic field of current carrying conductors. In this paper, to get a more practical understanding of shielding phenomena, we have investigated the magnetic field reduction by means of 3 dimensional numerical analysis and experiments. We found copper could reduce flux density more then permalloy in both cases of box shield and cylindrical shield. Iron under l0$\mu$T of 1 phase could reduce flux density about $20\%$ more than silicon steel, but both of them under 50$\mu$T has a similar reduction rate of $10\%$. The 3 phase horizontal model gave the highest reduction rate and the 1mm thickness iron under 10$\mu$T of 3 phase lines did lowest.

• 한국초전도ㆍ저온공학회논문지
• /
• 제17권1호
• /
• pp.6-9
• /
• 2015

For many applications of $ReBa_2Cu_3O_{7-x}$ (ReBCO) tapes it is needed to know the anisotropic properties of the used conductor in a broad range of magnetic field. In this paper we present the results of transport measurements on the SuNAM tape (GdBaCuO) with the rotation of the sample in magnetic fields up to 5 T in liquid nitrogen. The critical current over the magnetic field orientation ($I_c({\theta})$) curves demonstrate the appearance of distinct second peak around c-axis in low fields. This peak almost vanishes in the fields over 3 T. The evolution of the ab-peak form is also presented: the peak consistently reduces its height with the magnetic field going up and in the high fields the shoulders rise, changing the type of the distribution. To describe experimental curves the vortex path model was applied to the angular distributions of the critical current in magnetic field. Good agreements of the experimental data with the analytical expressions were obtained that confirm the vortex path model approach.

• 한국초전도ㆍ저온공학회논문지
• /
• 제16권4호
• /
• pp.26-30
• /
• 2014

We investigate the upper critical field anisotropy ${\Gamma}_H$ and the magnetic penetration depth anisotropy ${\Gamma}_{\lambda}$ of a high-quality $FeSe_{1-x}$ single crystal using angular dependent resistivity and torque magnetometry up to 14 T. High quality single crystals of $FeSe_{1-x}$ were successfully grown using $KCl-AlCl_3$ flux method, which shows a sharp superconducting transition at $T_C{\sim}9K$ and a high residual resistivity ratio of ~ 25. We found that the anisotropy ${\Gamma}_H$ near $T_C$ is a factor of two larger than found in the poor-quality crystals, indicating anisotropic 3D superconductivity of $FeSe_{1-x}$. Similar to the 1111-type Fe pnictides, the anisotropies ${\Gamma}_{\lambda}$ and ${\Gamma}_H$ show distinct temperature dependence; ${\Gamma}_H$ decreases but ${\Gamma}_{\lambda}$ increases with lowering temperature. These behaviors can be attributed to multi-band superconductivity, but different from the case of $MgB_2$. Our findings suggest that the opposite temperature dependence of ${\Gamma}_{\lambda}$ and ${\Gamma}_H$ is the common properties of Fe-based superconductors.

• 미생물학회지
• /
• 제36권2호
• /
• pp.91-96
• /
• 2000

불와전 균류인 Fusarium s^g pp.를 이용하여 여러 가지 배양조건과 생리적 영향에 따른 균주의 성장 및 T-2 toxin의 생성에 관하여 고찰하였다. T-2 toxin 의 검출방법은 thin layer chromatography (TCL) 법과 미생물학적 검출방법을 사용하였다. 고체 배지의 경우 횐옥수수 가루(Quaker사 제품)베지에서 다른 곡물보다 많은 양의 T-2 toxin이 생성되었으며,비교적 깨끗한 T-2 toxin이 정제되었다. 이 경우 배지 100g당 약 700 mg의 T-2 toxin이 생성되었으며, 그중 약 30%정도가 깨끗한 결정으로 정제되었다. 고온(20-$25^{\circ}C$)에서는 생장은 많았으나, T-2 toxin의 생성은 적었으며, 저온(10-$15^{\circ}C$)에서는 비교적 생장이 적었지만, T-2 toxin의 생성이 많았고, 젖당, 글리세롤, 솔비톨의 경우는 적었다. 유일 탄소원으로 구연산과 초산은 이용하지 못하였으며, 녹발의 경우 생장은 많았으나 T-2 toxin의 생성양은 적었다. 질소원의 경우 $NaNO_2$를 제외하고는 $(NH_4)_2NO_4$, $NH_4Cl_3$, $NH_4NO_3$, $KNO_3$ 를 거의 동일하게 이용하였다. 초기 pH값에 생성과 균주의 성장은 pH4.0-5.0일 경우 최적을 나타냈으며 ph6.0이상에서는 성장도 저하되고, T-2 toxin생성도 적었다. 회전속도에 따른 T-2 toxin 생성과 균주의 성장을 보면 회전속도가 속돠 증가함에 따라 균주의 생장과 T-2 toxin 생성량이 모두 증가하였다. $15^{\circ}C$에서 7일간 배양 후, $25^{\circ}C$로 옮겨 7일간 배양하여, toxin의 생성을 보면, $15^{\circ}C$에 7일간 배양했을 때보다 T-2 toxin양이 적었다. 이는 생성되었던 T-2 toxin이 분해되었음을 보여주는 것이다. 이상의 결과를 볼 때 T-2 toxin 대사 경로는 온도에 의한 효소 억제 또는 효소 유지 시스템에 의해 조절되는 것이라고 생각할 수 있다.

• 한국결정성장학회지
• /
• 제15권5호
• /
• pp.188-192
• /
• 2005

High $T_c(Y_{0.5}Nd_{0.25}Sm_{0.25})Ba_2Cu_3O_y[(YNS)-123]$ superconductors with/without $CeO_2$ additive were systematically investigated by the zone melt growth process in air. Cylindrical green rods of (YNS)-123 oxides were fabricated by cold isostatic pressing (CIP) method using rubber mould. A sample prepared by this method showed well-textured microstructure, and $(Y_{0.5}Nd_{0.25}Sm_{0.25})_2BaCuO_5[(YNS)211]$ nonsuperconducting inclusions were uniformly dispersed in large $(Y_{0.5}Nd_{0.25}Sm_{0.25})Ba_2Cu_3O_y$[(YNS)123] superconducting matrix. In this study, optimum melting temperature and growth rate were $1100^{\circ}C$ and 3 mm/hr, respectively. The directionally melt-textured (YNS)-123 sample with $CeO_2$ additive showed an onset critical temperature $(T_c)\;T_c{\geq}93K$ and sharp superconducting transition.

• 생명과학회지
• /
• 제20권5호
• /
• pp.805-810
• /
• 2010

본 연구의 목적은 다시마투여와 운동트레이닝이 흰쥐의 혈당과 지질성분에 미치는 영향을 규명하기 위함이다. 4주령의 수켯 쥐 27마리를 대조군(C, n=9), 다시마투여군(D, n=9)과 다시마투여와 운동트레이닝군(D+T, n=9)으로 나누었다. 운동트레이닝은 6주간 1주일에 5회, 30분간 트레드밀위에서 실시하였다. 혈당(C:$175.9{\pm}47.5$, D:$173.9{\pm}34.0$, D+T:$165.0{\pm}38.0\;mg/dl$)과 중성지질(C:$251.1{\pm}91.8$, D:$215.0{\pm}90.0$, D+T:$200.0{\pm}89.3$)의 집단 간의 차이는 존재하지 않았다. 콜레스테롤수치는 D+T군($81.8{\pm}11.2$)이 다른 두집단에 비해 낮았다(C:$103.0{\pm}13.5$, D:$102.1{\pm}14.5$). HDL-C의 수치는 D+T군($40.9{\pm}9.7$)이 상대적으로 다른 두집단에 비해 높았다(C:$32.6{\pm}3.8$, D:$31.7{\pm}7.3$). D군($98.0{\pm}41.0$)의 LDL-C수치는 통계적으로 C군($114.5{\pm}41.8$)보다 낮았으며, D+T군($91.2{\pm}41.7$)보다 높았다. 결론적으로, 다시마투여와 운동트레이닝은 혈중지질에 긍정적인 효과를 가져왔다.

• 한국의류학회지
• /
• 제35권12호
• /
• pp.1477-1485
• /
• 2011

Dyeability and colorfastness of the blended knits of cotton/rayon (40/60; C/R) and wool/tencel (10/90; W/T) are examined using the natural dyestuff ($Pinux^{TM}$) manufactured from Pinus radiata pine bark extract. In addition, pre-treatments (such as bleaching, mercerization and cationization) are performed to improve dyeability and colorfastness. The $Pinux^{TM}$ powder dyestuffs produced by Pinux Co., Ltd. are used as dyestuffs and their properties are examined for dyeing concentration (0.5-2% (owb)), dyeing time (30-120 minutes) and dyeing temperature (30-$90^{\circ}C$). Dyeability is evaluated with K/S value at 400nm, which is the maximum absorption wavelength for $Pinux^{TM}$. The results show the dyeability of W/T sample containing protein fiber with $Pinux^{TM}$ is superior to all cellulose fiber C/R. A concentration of dyestuff greater than 1.5% (owb), dyeing time 120 minutes and dyeing temperature of $90^{\circ}C$ are the most optimized conditions. It shows that the dyeability of C/R and W/T samples are high in the condition of an acid-dyeing bath and that dyeability highly declined in alkaline bath due to the instability of the proanthocyanidin pigment. After analyzing the effect of bleaching, mercerizing and cationizing (as pre-treatments on dyeability) it was concluded that the dyeability of the C/R sample was enhanced by mercerization but no significant effect by cationization. However, the simultaneous treatment of cationizing and dyeing resulted in far improved dyeability compared to dyeing after cationizing pre-treatment. As for the W/T sample, the effect of cationization was more prominent than the C/R sample. Colorfastness to color changes in the control W/T sample was higher than that of C/R's level 1-2, and it increased to Level 2 when bleaching pre-treatment was given and when a simultaneous cationizing treatment was adopted to the dyeing process. Colorfastness to light in W/T control sample resulted in Level 3 and further increased to an excellent Level of 4 with bleaching and simultaneous cationizing during dyeing process.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1993년도 가을 학술발표회 논문집
• /
• pp.220-225
• /
• 1993

This paper is an experimental study on shear capacity of the high strength lightweight reinforced concrete beams with shear-depth ratio between 1.5 and 2.5. Thirteen T & rectangular beams were tested to determine their diagonal cracking and ultimate shear capacity. The major variables are shear span-depth ratio (a/d=1.5, 2.0, 2.5), concrete compressive strength(f'c=210, 24., 270㎏/㎠) and tensile steel ratio( =0.6, 1.2%). Based on results obtained from experiment of high strength lightweight reinforced concrete Beam & normal concrete, the following conclusions were drawn. (1) The shear capacity of high-strength lightweight concrete is less 15% than that of normal concrete under same condition. (2) As the results of Comparing this experimental datas with other various formulas. It is regarded that ACI 318-89 shear strength formula related tensile strength is proper to design formula of shear strength of high-strength lightweight reinforced concrete using lightweight concrete.

• Asian-Australasian Journal of Animal Sciences
• /
• 제32권8호
• /
• pp.1186-1194
• /
• 2019

Objective: The influence of broiler carcass scalding conditions on chicken breast meat quality parameters was investigated. Methods: Two hundred and seventy Cobb broiler chickens from 42 to 48 days old were slaughtered according to the standard industry practice and scalded in five temperature/time combinations-$T_1$, $54^{\circ}C/210s$; $T_2$, $55^{\circ}C/180s$; $T_3$, $56^{\circ}C/150s$; $T_4$, $57^{\circ}C/120s$; $T_5$, $58^{\circ}C/90s$. Results: Scalding temperature increase resulted in higher values of external and ventral lightness and in protein functionality reduction-determined by emulsification capacity and protein denaturation-in chicken breast fillets 24 h post-mortem. Protein secondary structures had conformational changes, with a decrease of the ${\alpha}$-helix and an increase of the ${\beta}$-sheet and ${\beta}$-turn proportions, mainly in $T_1$ and $T_5$ samples, determined by Fourier-transform infrared spectroscopy in an attenuated reflectance mode analysis. The chemical composition, pH, water holding capacity and Warner-Bratzler shear force did not differ among the treatments. In the fatty acid profile, the 18:1n-9 was lower in $T_5$, which suggested that the high scalding-temperature could have caused the lipid oxidation. The values of the polyunsaturated fatty acids (PUFA), such as 22:2, 20:4n-6, and 22:6n-3, were highest in the $T_5$, thus being related to the phospholipid cellular membrane collapse in this experimental condition and subsequent release of these PUFA. Conclusion: Intermediate scalding-parameters avoided the negative changes in the chicken meat quality.

• 한국초전도ㆍ저온공학회논문지
• /
• 제24권3호
• /
• pp.41-46
• /
• 2022

The superconducting properties of high temperature superconducting (HTS) GdBCO coated conductor (CC) tape (Ag/GdBCO/Buffer-layers/Stainless Steel) were investigated, specifically a series of samples prepared by vacuum heat treatment (200℃ to 600℃), using a Quantum Design PPMS-14. The critical current density J_c value was obtained by applying the modified Bean model to the irreversible magnetization ∆M_irr(H) data which was estimated from the magnetization M(H) loop. The reduction rates of lnJ_c and T_c values according to the increase of the vacuum annealing temperature T_an were d(lnJ_c)/dT_an = - 0.016 A/(cm²∙℃) and dT_c/dT_an = - 0.24, respectively. We examined the effect of recovery temperature T_re (475℃ to 700℃) and recovery duration time t (0.5 h to 24 h) on the restoration of previously completely lost superconductivity in samples that subsequently received heat treatment in an O₂ gas flow space. All samples were fully restored to superconductivity by heat treatment in an O₂ gas flow space. The recovery temperatures T_re (475℃ to 700℃) and recovery duration times t (0.5 h to 24 h) were both independent of the superconductivity recovery characteristics.