• Molecules and Cells
• /
• 제24권1호
• /
• pp.132-138
• /
• 2007

4-1BB (CD137), a member of the tumor necrosis factor receptor superfamily, is expressed on activated T-cells, and 4-1BB signaling due to interaction with 4-1BB ligand or ligation with anti-4-1BB monoclonal antibody (mAb) costimulates T cells. It has been shown that administration of anti-4-1BB mAb induces anti-tumor immunity in mice, but the nature of the cellular subsets responsible for this immunity is uncertain. In this study we found that anti-4-1BB mAb administration to B16F10 melanoma-bearing mice induced marked expansion of $CD11c^+CD8^+$ T-cells in parallel with suppression of pulmonary tumors. The mAb-treated mice produced higher levels of $IFN-{\gamma}$ in their tumor tissues, spleen and lymph nodes than mice exposed to control antibody. When the $CD11c^+CD8^+$ T-cells were purified and re-stimulated in vitro, they produced high levels of the Th1 cytokines, $IFN-{\gamma}$ and IL-2, but low levels of the Th2 cytokines, IL-4 and IL-10. Furthermore, they expressed high levels of 4-1BB and CD107a, a marker of activated cytotoxic T-lymphocytes. Our results suggest that $CD11c^+CD8^+$ T-cells play a role in the anti-tumor immunity induced by anti-4-1BB mAb.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.791-792
• /
• 2008

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.343-343
• /
• 2005

• 전자공학회논문지C
• /
• 제34C권4호
• /
• pp.16-25
• /
• 1997

This paper shows a SDRAM opeating in 200MHz clock cycle which it use data interleave and pipelining for high speed operation. We proposed NdC (Negative DEaly circuit) to improve clock to access time(tAC) characteristics, also we proposed low power WL(wordline)driver circit and high efficiency VPP charge-pump circit. Our all circuits has been fabricated using 0.4um CMOS process, and the measured maximum speed is 200Mbytes/s in LvTTL interface.

• Biomolecules & Therapeutics
• /
• 제15권2호
• /
• pp.118-122
• /
• 2007

This study was performed to evaluate the bioequivalency between the Osmetone$^{TM}$ Tablet (Myeongmoon Pharm. Co., Ltd.) as a test formulation and the Relafen$^{TM}$ Tablet (Handok Pharm. Co., Ltd.) as a reference formulation. Twenty-four healthy male volunteers were administered the formulations by the randomized Latin square crossover design, and the plasma samples were determined by a high performance liquid chromatography (HPLC) with Ultra-Violet (UV) detector. AUC$_t$, C$_{max}$ and T$_{max}$ were obtained from the time-plasma concentration curves, and log-transformed AUC$_t$ and C$_{max}$ and log-untransformed T$_{max}$ values for two formulations were compared by statistical tests and analysis of variation. AUC$_t$ was determined to be 897.8${\pm}$431.1 ug.hr/ml for the reference formulation and 902.3${\pm}$408.4 ug.hr/ml for the test formulation. The mean values of C$_{max}$ for the reference and test formulations were 24.2${\pm}$8.9 and 24.0${\pm}$9.5 ug/ml, respectively. The AUC$_t$ and C$_{max}$ ratios of the reference Relafen$^{TM}$ Tablet to the test Osmetone$^{TM}$ Tablet were +5.01% and -0.83%, respectively, showing that the mean differences were satisfied the acceptance criteria within 20%. The results from analysis of variance for logtransformed AUC$_t$ and C$_{max}$ indicated that sequence effects between groups were not exerted and 90% confidence limits of the mean differences for AUC$_t$ and C$_{max}$ were located in ranges from log 0.80 to log 1.25, satisfying the acceptance criteria of the KFDA bioequivalence. The Osmetone$^{TM}$ Tablet as the test formulation was considered to be bioequivalant to the Relafen$^{TM}$ Tablet used as its reference formulation, based on AUC$_t$ and C$_{max}$ values.

• Biomolecules & Therapeutics
• /
• 제14권1호
• /
• pp.50-55
• /
• 2006

The objective of the study was to evaluate the bioequivalency between the $Rozid^{TM}$ Tablet (Ilhwa Pharm. Co., Ltd.) as a test formulation and the $Rulid^{TM}$ Tablet (Handok Pharm. Co., Ltd) as a reference formulation. Twenty-four healthy male volunteers were administered the formulations by the randomized Latin square crossover design, and the plasma samples were determined by a high performance liquid chromatography (HPLC) with fluorescence detector. $AUC_t,\;C_{max}\;and\;T_{max}$ were obtained from the time-plasma concentration curves, and log-transformed $AUC_t\;and\;C_{max}$ and log-untransformed $T_{max}$ values for two formulations were compared by statistical tests and analysis of variation. $AUC_t$ was determined to be $63.30{\pm}25.57{\mu}g.hr/ml$ for the test formulation and $64.02{\pm}29.27mg.hr/ml$ for the reference formulation. The mean values of $C_{max}$ for the test and reference formulations were $5.07{\pm}2.14\;and\;5.53{\pm}2.60{\mu}g/ml$, respectively. The $AUC_t,\;and\;C_{max}$ ratios of the test $Rozid^{TM}$ Tablet to the reference $Rulid^{TM}$ Tablet were -1.12% and -8.32%, respectively, showing that the mean differences were satisfied the acceptance criteria within 20%. The results from analysis of variance for log-transformed $AUC_t,\;and\;C_{max}$ indicated that sequence effects between groups were not exerted and 90% confidence limits of the mean differences for $AUC_t,\;and\;C_{max}$ were located in ranges from log 0.80 and log 1.25, satisfying the acceptance criteria of the KFDA bioequivalence. The RozidTM Tablet as the test formulation was considered to be bioequivalent to the RulidTM Tablet used as its reference formulation, based on $AUC_t,\;and\;C_{max}$ values.

• 한국해양환경ㆍ에너지학회지
• /
• 제12권4호
• /
• pp.235-247
• /
• 2009

나로도를 중심으로 한 한국 남해안에서 발생하는 C. polykrikoides 적조의 원인 규명을 위해 1995년부터 2008년까지 국립수산과학원이 조사한 정선해양관측 및 위성정보 자료에 기초하여 동계 및 하계에 있어서의 수온염분 분포의 특징을 조사하였다. C. polykrikoides 적조는 나로도 주변 해역에서의 평균 수온이 약 $25.0{\sim}26.0^{\circ}C$, 염분이 약 31.00 psu 전후일 때 가장 많이 발생하였다. 한국남해 연안수와 외해수 사이에는 동계 및 하계에 각각 서로 다른 열염전선이 관측되었다. 즉, 동계에는 저온저염의 한국남해 연안수, 쓰시마 난류계의 중간수, 고온고염의 쓰시마 난류, 저온저염의 중국대륙 연안수 사이에 네 개의 전선이 관측되었다. 반면, 하계에는 저온고염의 한국남해 연안수, 고온저염의 쓰시마 난류, 고온고염의 중국대륙 연안수 사이에 두 개의 전선이 관측되었다. 이러한 열염전선은 서로 물리적 성질이 다른 수괴에 의해 형성된다는 사실이 T-S diagram을 통해서도 확인되었다. 이상으로부터, 나로도 주변해역에서 하계에 발생하는 C. polykrikoides 적조는 한국남해 연안수와 쓰시마 난류 사이에 형성되는 열염전선과 밀접한 연관을 가지고 있음을 알 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.32-32
• /
• 2008

Microstructure and positive temperature coefficient of resistivity (PTCR) characteristics of $0.9BaTiO_3-0.1(Bi_{0.5}Na_{0.5})TiO_3$ [BaBiNT] ceramics doped with $Nb_2O_5$ were investigated in order to develop the Pb-free high Curie temperature ($T_c$)(>$160^{\circ}C$) PTC thermistor. The BaBiNT ceramics showed a tetragonal perovskite structure, irrespective of the added amount of $Nb_2O_5$. They also have a homogeneous microstructure. The resistivity of BaBiNT ceramics was gradually decreased by doping $Nb_2O_5$, which might be due to $Nb^{+5}$ ions substituting for $Ti^{+4}$ sites. The PTCR characteristics of BaBiNT ceramics appeared when the amount of doped $Nb_2O_5$ exceeded 0.0025mol%. Moreover, the abrupt grain growth was observed for the 0.03mol% $Nb_2O_5$added BaBiNT ceramics. It showed an especially high $T_c$ of approximately $172^{\circ}C$ and good PTCR characteristics of a high $\rho_{max}/\rho_{min}$ ratio ($2.96\times10^3$), a high resistivity temperature factor (11.40/$^{\circ}C$) along with a relatively low resistivity ($3.5\times10^4\Omega{\cdot}cm$).

• Macromolecular Research
• /
• 제13권2호
• /
• pp.156-161
• /
• 2005

The thermal transitions of a nylon 6/layered silicate nanocomposite were studied by differential scanning calorimetry and in-situ synchrotron X-ray diffraction. The drawn film of the nylon 6/layered silicate nanocomposite typically showed three endotherms in the DSC thermogram; a very broad endotherm at $\sim120^{\circ}C(T_{1})$, a double-melting endotherm at $\sim215^{\circ}C(T_{2})$, and a high temperature endotherm at $\sim240^{\circ}C(T_{3})$. The drawn film of the nylon 6/ layered silicate nanocomposite was comprised of a mixture of the $\alpha and \gamma$ forms, with $the \alpha form$ being generated by drawing the pressed film having $the \gamma form$. The melting and crystallization of the crystals were observed at the above thermal transitions during the heating experiment performed at the Pohang X-ray synchrotron radiation source (4C2). The newly generated form was meta-stable and melted $at {\sim}T_{1}$. The double-melting $at {\sim}T_{2}$ was due to the exothermic crystallization of $the \alpha form$ during the main endothermic melting of $the \gamma form$. $The \alpha form$ crystallized $at {\sim}T_{2}$ and melted $at {\sim}T_{3}$.

• 한국초전도ㆍ저온공학회논문지
• /
• 제19권2호
• /
• pp.19-24
• /
• 2017

Cryogenic milling which is a combined process of low-temperature treatment and mechanical milling was applied to fabricate high critical current density $(J_c)MgB_2$ bulk superconductors. Liquid nitrogen was used as a coolant, and no solvent or lubricant was used. Spherical Mg ($6-12{\mu}m$, 99.9 % purity) and plate-like B powder (${\sim}1{\mu}m$, 97 % purity) were milled simultaneously for various time periods (0, 2, 4, 6 h) at a rotating speed of 500 rpm using $ZrO_2$ balls. The (Mg+2B) powders milled were pressed into pellets and heat-treated at $700^{\circ}C$ for 1 h in flowing argon. The use of cryomilled powders as raw materials promoted the formation reaction of superconducting $MgB_2$, reduced the grain size of $MgB_2$, and suppressed the formation of impurity MgO. The superconducting critical temperature ($T_c$) of $MgB_2$ was not influenced as the milling time (t) increased up to 6 h. Meanwhile, the critical current density ($J_c$) of $MgB_2$ increased significantly when t increased to 4 h. When t increased further to 6 h, however, $J_c$ decreased. The $J_c$ enhancement of $MgB_2$ by cryogenic milling is attributed to the formation of the fine grain $MgB_2$ and a suppression of the MgO formation.