• Nutrition Research and Practice
• /
• v.8 no.6
• /
• pp.655-661
• /
• 2014

BACKGROUND/OBJECTIVES: The purpose of this study was to examine the effects and associated mechanisms of arctiin, a lignan compound found in burdock, on adipogenesis in 3T3-L1 cells. Also, the effects of arctiin supplementation in obese mice fed a high-fat diet on adiposity were examined. MATERIALS/METHODS: 3T3-L1 cells were treated with arctiin (12.5 to $100{\mu}M$) during differentiation for 8 days. The accumulation of lipid droplets was determined by Oil Red O staining and intracellular triglyceride contents. The expressions of genes related to adipogenesis were measured by real-time RT-PCR and Western blot analyses. For in vivo study, C57BL/6J mice were first fed either a control diet (CON) or high-fat diet (HF) to induce obesity, and then fed CON, HF, or HF with 500 mg/kg BW arctiin (HF + AC) for four weeks. RESULTS: Arctiin treatment to 3T3-L1 pre-adipocytes markedly decreased adipogenesis in a dose-dependent manner. The arctiin treatment significantly decreased the protein levels of the key adipogenic regulators $PPAR{\gamma}$ and $C/EBP{\alpha}$, and also significantly inhibited the expression of SREBP-1c, fatty acid synthase, fatty acid-binding protein and lipoprotein lipase. Also, arctiin greatly increased the phosphorylation of AMP-activated protein kinase (AMPK) and its downstream target phosphorylated-acetyl CoA carboxylase. Furthermore, administration of arctiin significantly decreased the body weight in obese mice fed with the high-fat diet. The epididymal, perirenal or total visceral adipose tissue weights of mice were all significantly lower in the HF + AC than in the HF. Arctiin administration also decreased the sizes of lipid droplets in the epididymal adipose tissue. CONCLUSIONS: Arctiin inhibited adipogenesis in 3T3-L1 adipocytes through the inhibition of $PPAR{\gamma}$ and $C/EBP{\alpha}$ and the activation of AMPK signaling pathways. These findings suggest that arctiin has a potential benefit in preventing obesity.

• Bulletin of the Korean Chemical Society
• /
• v.10 no.6
• /
• pp.551-554
• /
• 1989

Quadrupole coupling constants of $^{63}$CU in the high $T_c$ superconductor $YBa_2Cu_3O_7_{-x}$, as determined by NQR or NMR studies, are compared with the values for representative Cu(Ⅱ) complexes determined by analyzing the forbidden lines in their EPR spectra. It is shown that the two NQR lines at 22 and 31 MHz correpsond to the quadrupole coupling constants of a square planar Cu(Ⅱ) complex and a square pyramidal Cu(Ⅱ) complex, respectively.t This result is in agreement with the assignment of these lines to Cu(1) and Cu(2) sites in YBCO based on the NMR spectra of oriented single crystals.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.9
• /
• pp.1538-1544
• /
• 2006

This paper proposes a non-systolic parallel $AB^2+C$ Computing unit based on irreducible AOP order m of $GF(2^m)$. Proposed circuit have only AND gates and EX-OR gates, composes of cyclic shift operation, multiplication operation power operation power-sum operation and addition operation using a merry irreducible AOP. Suggested operating a method have an advantage high speed data processing, low power and integration because of only needs AND gates and EX-OR gates. $AB^2+C$ computing unit has delay-time of $T_A+(1+[log^m_2])T_X$.

• Electrical & Electronic Materials
• /
• v.9 no.4
• /
• pp.404-409
• /
• 1996

The structural and electric properties of $Y_{1-x}$YbF$_{x}$Ba$_{2}$Cu$_{3}$O$_{7-y}$(x=0.0, 0.1, 0.2, 0.3, 0.4, 0.5 and 0.6) have been investigated by using XRD(X-ray diffraction), TMA(thennomechanical analysis), NMR(nuclear magnetic resonance) analysis and four probe method. $Y_{1-x}$YbF$_{x}$Ba$_{2}$Cu$_{3}$O$_{7-y}$ samples were prepared by conventional solid-state reaction method using $Y_{2}$O$_{3}$, BaCO$_{3}$, CuO and YbF$_{3}$ power. TMA and high temperature XRD results shows that orthorhombic to tetragonal phase transition occurs in the unfluorinated 1-2-3 sample while the phase change is not observed in the fluorinated 1-2-3 samples. Superconducting transition temperature(T$_{c}$) increases with increasing YbF$_{3}$ content ; T$_{c}$, of the sample reaching maximum of 102K for x=0.3, and then decreases with further increasing YbF$_{3}$ content. The structural analysis and T$_{c}$ results shows that the fluorine doping stabilize the orthorhombic phase, together with the increase in T$_{c}$.}$ c/.TEX> c/.

• Ocean Science Journal
• /
• v.43 no.4
• /
• pp.195-208
• /
• 2008

This paper evaluates whether a thermodynamic ocean-carbon model can be used to predict the monthly mean global fields of the surface-water partial pressure of $CO_2$ ($pCO_{2SEA}$) from sea surface salinity (SSS), temperature (SST), and/or nitrate ($NO_3$) concentration using previously published regional total inorganic carbon ($C_T$) and total alkalinity ($A_T$) algorithms. The obtained $pCO_{2SEA}$ values and their amplitudes of seasonal variability are in good agreement with multi-year observations undertaken at the sites of the Bermuda Atlantic Timeseries Study (BATS) ($31^{\circ}50'N$, $60^{\circ}10'W$) and the Hawaiian Ocean Time-series (HOT) ($22^{\circ}45'N$, $158^{\circ}00'W$). By contrast, the empirical models predicted $C_T$ less accurately at the Kyodo western North Pacific Ocean Time-series (KNOT) site ($44^{\circ}N$, $155^{\circ}E$) than at the BATS and HOT sites, resulting in greater uncertainties in $pCO_{2SEA}$ predictions. Our analysis indicates that the previously published empirical $C_T$ and $A_T$ models provide reasonable predictions of seasonal variations in surface-water $pCO_{2SEA}$ within the (sub) tropical oceans based on changes in SSS and SST; however, in high-latitude oceans where ocean biology affects $C_T$ to a significant degree, improved $C_T$ algorithms are required to capture the full biological effect on $C_T$ with greater accuracy and in turn improve the accuracy of predictions of $pCO_{2SEA}$.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.16 no.6
• /
• pp.273-277
• /
• 2006

High velocity of oxy-fuel (HVOF) thermal spray coating is progressively replacing the other classical hard coatings such as chrome plating and ceramic coating by the classical methods, since the very toxic $Cr^{6+}$ ion is well known as carcinogen causing lung cancer, and the ceramic coatings are brittle. Co-alloy T800 powder is coated on the Inconel 718 substrates by the HVOF coating procesess developed by this laboratory. For the study of the possibility of replacing of chrome plating, the wear properties of HVOF Co-alloy T800 coatings are investigated using the reciprocating sliding tester with a counter sliding SUS 304 ball both at room and at an elevated temperature of $1000^{\circ}F\;(538^{\circ}C)$. The possibility as durability improvement coating is studied for the application to the high speed spindles vulnerable to frictional heat and wear. Wear mechanisms at the reciprocating sliding wear test are studied far the application to the systems similar to the sliding test such as high speed spindles. Wear debris and frictional coefficients of T800 coatings both at room and at an elevated temperature of $538^{\circ}C$ are drastically reduced compared to those of non-coated surface of Inconel 718 substrates. Wear traces and friction coefficients of both coated and non-coated surfaces are drastically reduced at a high temperature of $538^{\circ}C$ compared with those at room temperature. These show that the coating is highly recommendable far the durability Improvement coating on the surfaces vulnerable to frictional heat and wear.

• Applied Chemistry for Engineering
• /
• v.5 no.1
• /
• pp.81-89
• /
• 1994

A study on Mm type electrode which is relatively high in electrode capacity and low in material cost was performed to develope high performance nickel-metal hydride battery. The electrode characteristics were investigated by P-C-T, charge-discharge and microencapsulation treatment experiments. The plateau pressure and hydrogen absorption capacity obtained from the P-C-T experiment were 0.4 atm and 310 mAh/g, respectively. The electrode capacity and stability of microencapsulated electrode were improved than those of conductor mixed electrode and the microencapsulation was possible without pretreatment. The electrode capacity of microencapsulated Mm type alloy was 240~250 mAh/g(0.2 C).

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.577-595
• /
• 2017

${\bullet}$ Silicon Carbide (SiC) had excellent material properties as the base material for next generation of power semiconductor. In developing SiC MOSFET, gate oxide reliability issues had to be first overcome before commercial application. Besides, a high and stable gate-source voltage threshold $V_{GS(th)}$ is also an important parameter for operation robustness. SiC MOSFET with such characteristics can directly use existing high-speed IGBT gate driver IC's. ${\bullet}$ The linear voltage drop characteristics of SiC MOSFET will bring lower conduction loss averaged over full AC cycle compared to similarly rate IGBT. Lower switching loss enable higher switching frequency. Using package with auxiliary source terminal for gate driving will further reduce switching losses. Dynamic characteristics can fully controlled by simple gate resistors. ${\bullet}$ The low switching losses characteristics of SiC MOSFET can substantially reduce power losses in high switching frequency operation. Significant power loss reduction is also possible even at low switching frequency and low switching speed. in T-type 3-level topology, SiC MOSFET solution enable three times higher switching freqeuncy at same efficiency.

• Food Science of Animal Resources
• /
• v.31 no.4
• /
• pp.588-595
• /
• 2011

In this study, the effects of red ginseng extracts (RGE), which has been used as an antioxidant and antimicrobial agent, on pork sausage were evaluated. The treatments were as follows; addition of 0.01% sodium ascorbate (V), 0.5% RGE (T1), 1.0% RGE (T2) and 1.5% RGE (T3) to the basal formula (C). T3 had a significantly higher pH, cooking loss and yellowness ($CIEb^*$) and lower lightness (CIE $L^*$) and redness (CIE $a^*$) than the other samples. The hardness and surface hardness values of 1.5% RGE treated sample were significantly lower (p<0.01) than those of C. However, the cohesiveness values of the RGE samples were higher than the others (p<0.05). In the sensory evaluation, no significant differences in color, taste, texture, juiciness and acceptability were observed among the tested samples, while, the aroma scores of T2 and T3 were higher than those of the C and V samples (p<0.05). The TBARS values of RGE treated groups were higher (p<0.05) than the C sample after 1, 2 and 3 weeks of storage; however, this value did not increase with storage time (p>0.05). When the RGE concentration was high, the reduction in total plate counts and VBN value at week 3 and 4 of storage (p<0.01) decreased. In conclusion, red ginseng extracts seemed to have a positive impact on lipid oxidation, aroma and the microbial characteristics of pork sausage.

• Macromolecular Research
• /
• v.15 no.6
• /
• pp.533-540
• /
• 2007

We designed and successfully synthesized UV curable, functional acrylate monomers having a polarizing group, i.e., an electron-withdrawing and/or electron-donating group for the optical materials of high refractive index. Optical polymer films made from the functional methacrylate monomers were achieved with photo crosslinking under UV illumination. A monomer having amino and cyano groups (Dimer-CN) exhibited the highest refractive index ($n_{TE}$=1.595 at 850nm) among the studied methacrylate derivatives, due to the large polarizability of the dipolar monomer structures with electron-donating and withdrawing groups. By controlling the compositions of the functional acrylate monomer of copolymers, the refractive indices of the polymers were readily adjusted within a wide range of 1.498-1.595. The copolymers showed a high glass transition temperature $(T_g)$ and good thermal stability, which are desirable for optical applications. $T_g$ and $T_{10%}$ (10%-weight loss occurred) of the copolymers ranged from $120-140^{\circ}C$ and from $329-387^{\circ}C$, respectively.