• Journal of Korean Society of Steel Construction
• /
• v.17 no.4 s.77
• /
• pp.395-405
• /
• 2005

This paper summarizes the test results of the flexible-stiff mixed system for the effective use of high-strength steel. Steel with a high degree of strength and performance is being increasingly required as buildings get larger and taller. High-strength steels cannot be used for many applications, though, because they have a number of defects. For instance, they have a high yield ratio, a small strain in maximum stress, and equal Young's modulus compared to mild steels. A new structural system is needed to effectively use high-strength steels with some defects. This paper proposes the flexible-stiff mixed system for the effective use of high-strength steels with high yield ratios. The possibility of using the system is discussed through the test of flexible-stiff mixed columns with high-strength steels. The main variable of the specimens is the yield displacement ratio, including both the force ratio and the stiffness ratio. The proper yield displacement ratio is proposed by adopting the flexible-stiff mixed system. The test results showed that the proposed flexible-stiff mixed system has a high capacity for energy absorption and the highest capacity for energy absorption when the yield displacement ratio of the flexible element to the stiff element ranges from 2.7 to 3.3.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2002.11a
• /
• pp.29-36
• /
• 2002

High fluid concrete unlike OPC concrete is made with various material, and the phase of fresh concrete is considerably different. In order to understand fluidity phase and mix properties of high fluid concrete, concrete is required to access as suspension structure which consists of aggregate and paste. The focus of this paper is to analyze the test results and quantify the effect of mix proportions of molar and fineness modulus of ,and on the properties of fresh mortar. The effect of water-binder ratio, sand-binder ration, content; of ggbs (by mass of total cementitious materials), and various contents of water reducing agent on the yield stress and plastic viscosity of the mix is studied. Based on the experimental results, the following conclusion; can be drawn: (1) The mixing time needed (or high fluid mortar was approximately two times more than that of ordinary portland mortar. (2) The fluidity phase of mortar could be explained by yield stress of mix and the fluidity of mortar. (3) As the content of ggbs increased, yield stress of mortar was decreased and plastic viscosity of it was increased. (4) For the high fluid mortar, it was appeared that sand-binder ratio should be below 1.5.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.1
• /
• pp.59-63
• /
• 1999

Yield and growth characteristics were compared for five rice cultivars; a new Tongil-type, so called "super-rice", Dasanbyeo, an old Tongil-type Milyang 23, two japonicas Dongjinbyeo and Ilpumbyeo, and a new plant type (NPT)line IR65600-27-1-2. The objective of this stusy was to clarify the high yielding capacity of Dasanbyeo in terms of growth characteristics. The average grain yield (9 t/ha) of Dasanbyeo was higher than that of Milyang 23 by ca. 9% that of japonicas by 20 to 30%, and that of NPT line by ca. 100%. The higher grain yield of Dasanbyeo was attributable not only to the greater dry matter production but also to the higher harvest index (HI). Dasanbyeo showed the greatest dry matter at harvest owing not only to the rapid leaf expan-sion at early growth stage and the resulting high LAI through the entire growth stage but also to the high NAR despite the high LAI. The rapid leaf expansion of Dasanbyeo at early growth stage seemed to be related in part to the profuse tillering capacity. HI was 0.53 in Dasanbyeo, 0,51 in Milyang 23, 0.41 in japonicas, and 0.35 in NPT line. Dasanbyeo was indebted for its higher HI to the relatively high grain filling ratio in spite of a much greater sink size than the other cultivars. Dasan had a greater source to sink ratio during grain ripening as measured by LAD/spikelet and dry matter production/spikelet which showed positove correlations with the grain ripening ratio. New plant type (NPT) line showed the lowest grain yield owing to the small sink size and the low grain filling ratio which seemed to have resulted from the abundant occurrence of weak-strength spikelets. The weak sink strength, in turn, seemed to have suppressed photosynthesis during the grain ripening stage.

• Plant Resources
• /
• v.5 no.2
• /
• pp.104-108
• /
• 2002

In order to obtain basic information for selecting early maturing rice varieties which is suitable for early cropping before Alisma plantago in the southern part of Korea. Six rice varieties were grown from May to August in 2002 at Youngjeon Experiment Field, Sunchon and yield components and yield of plants were investingated. Early maturing rice cv. Grubyeo showed higher rough rice yield than any other varieties used in the experiment. It showed high yield components, such as culm length, panicle length, number of panicles per plant, number of spikelets per panicle and ratio of ripened grains. Therefore, it was concluded that Grubyeo was the most suitable variety with high yield for the cultivation before growing of Alisma plantago at the southern part of Korea. The heritability of culm length number of spikelets per panicle and rough rice yield were high and that of panicle length number of panicle per plant, ratio of ripened grain and 1,000 grain wt. of milled rice were low. According to the result of path coefficient analysis, characters highly correlated with rough rice yield showed large direct effects on rough rice yield.

• Korean Journal of Soil Science and Fertilizer
• /
• v.5 no.1
• /
• pp.33-39
• /
• 1972

For the increase of productivity, canopy structure and nutritional status in various productivity grades (high>700, medium>600 and low>500kg/l0a as head rice) were investigated in a study using Jinheung(Oryza sativa L.) for the increase of producticity with following results: 1. High yield plot showed greater leaf area and slow decrease of it after heading stage. While low yield plot had rapidly decrease of leaf area. 2. High yield plot showed higher light transmission ratio (LTR) durnig early grow stage, low LTR. during late grow stage, and higher leaf area per LTR. 3. Net assimilation ratio was decrease with the increase of leaf area index (LAI) and it was always higher in high yield plot. 4. High yield plant had greater amount of total nitrogen uptake, slow uptake rate, and considerable uptake after heading while low yield plant showed higher uptake of nitrogen in early stage of growth and no uptake after heading. 5. The percent ratio starch at heading to total at harvesting was 40% for low yield plant and 10% for highyield plant inderting that high yield depends much on past-heading starch synthesis. 6. Main factor determining secondary yield was ripened grain ratio.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2005.03a
• /
• pp.211-219
• /
• 2005

Nowadays, various grades of high-strength steels are available. The application of ultra-high grades of steels for building structures, however, is limited only to the elements stressed under tension. The highest grade of steels generally used has a tensile strength of around 600N/mm2. Most research is focused on lower yield ratios of high strength steel in the inelastic range to ensure the stability of structures. In this paper, however, the possibility of an effective application of high strength steel with high yield ratio to building structures is discussed. An efficient structural system and a design method based on earthquake response analysis and experimental results are proposed.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.4 no.2
• /
• pp.143-147
• /
• 2002

Studies on the interrelationship between biological yield and harvest index, and their association with shoot rearing were carried out in 9 promising mulberry genotypes, which indicated significant variations among genotypes. Biological yield had close association with leaf yield components indicating that they are inter-related for higher productivity in mulberry, Biological yield revealed highly significant positive correlation with important leaf yield components. However height of the longest branch showed negative correlation with biological yield. Genotypes with higher biological yield associated with low ratio of stem weight to leaf weight and high Harvest index on dry weight basis are to be selected for shoot rearing. Biological yield recorded on fresh weight basis had less impact on the present study in comparison to dry weight basis.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.8 no.1
• /
• pp.107-112
• /
• 2004

The combining abilities in the 5 newly evolved thermo tolerant breeds viz., SR6, SR7, SR8 SR9 and SR10 of silkworm Bombyx mori L. and their 15 hybrids were made in a line${\times}$tester crossing programme. Data were analysed for seven quantitative traits i.e., pupation rate, cocoon yield, cocoon weight, cocoon shell weight, cocoon shell ratio, filament length and raw silk percentage under optimum room temperature $(25{\pm}{1^{\circ}C})$ conditions (In case of high temperature $(36{\pm}{1^{\circ}C})$ stress conditions five economic traits except filament length and raw silk percentage) with 3 widely adapted testers i.e., KA, CSR2 and CC1 as lines (females) and testers (males) respectively. The performance at high temperature and low humidity conditions aye only taken into consideration for selecting the best lines/hybrids. Among the lines SR6 exhibited positive General combining ability (GCA) effects for pupation rate, cocoon yield, cocoon weight and cocoon shell ratio traits, followed by SR7 for pupation rate, cocoon yield and cocoon shell weight and cocoon shell ratio. Among testers, KA exhibited positive GCA effects for two quantitative traits cocoon yield, cocoon weight and CSR2 for cocoon shell weight and cocoon shell ratio under adverse temperature conditions. The hybrid SR6${\times}$CC1 and SR7${\times}$CSR2 exhibited significant positive Specific combining ability (SCA) effects for majority of the traits in high temperature stress conditions of rearing. The better parent value of heterosis(Heterobeltiosis) was exhibited by the hybrid SR6${\times}$CC1 for pupation rate, cocoon yield, cocoon weight and cocoon shell weight and SR7${\times}$CSR2 for all the trails evaluated under high temperature conditions. Based on the results, the lines SR6 and SR7 was judged as best combiners and the hybrids SR6${\times}$CC1 and SR7${\times}$CSR2 can be selected for commercial exploitation in tropical climate.

• Journal of Korean Society of Forest Science
• /
• v.99 no.4
• /
• pp.479-486
• /
• 2010

We analyzed the relationships between the daily yield and quality of pine-mushroom to predict the annual production pattern and unit price of the mushroom with the records of pine-mushroom trade at Yeongdeok forestry cooperative's market for nine years (2000~2008). Although there were some exceptions due to extreme drought or extraordinary temperature, the production ratio of high quality (first and second grade) was more than 50% in early stage and decreased, while that of low quality (pileus opened and defected ones) showed increasing pattern after the production reached in peak. The ratio of high quality and that of low quality were reversed 1~9 days before the mushroom production reached the acme of daily yield, which allowed us to predict that the mushroom production would be decreased when the ratio of low quality overcomes that of high quality. The ratio of high quality preceded about 3~4 days prior to that of daily yield, and the mushroom yield showed significant correlations with the ratio of high quality mushroom prior to 3~4 days of the day with the coefficient larger than 0.5 (r=0.51 for 3 days and r=0.54 for 4 days). Thus, we concluded that the analysis of grade distribution of pine-mushroom at the market may provide a significant clue to predict production pattern of the mushroom. In addition, the price of high quality pine-mushroom showed clear negative correlations with the yield. Thus, the analysis may take a good role for the trading of pine-mushroom with providing information for predicting the price of pine-mushroom.

• Journal of the Korea Institute of Building Construction
• /
• v.2 no.4
• /
• pp.145-152
• /
• 2002

High fluid concrete unlike OPC concrete is made with various material, and the phase of fresh concrete is considerably different. In order to understand fluidity phase and mix properties of high fluid concrete, concrete is required to access as suspension structure which consists of aggregate and paste. The focus of this paper is to analyze the test results and quantify the effect of mix proportions of mortar and fineness modulus of sand on the properties of fresh mortar. The effect of water-binder ratio. sand-binder ration. contents of ggbs (by mass of total cementitious materials). and various contents of water reducing agent on the yield stress and plastic viscosity of the mix is studied. Based on the experimental results, the fellowing conclusions can be drawn: (1) The mixing time needed for high fluid mortar was approximately two times more than that of ordinary portland mortar. (2) The fluidity phase of mortar could be explained by yield stress of mix and the fluidity of mortar. (3) As the content of ggbs increased, yield stress of mortar was decreased and plastic viscosity of it was increased. (4) For the high fluid mortar, it was appeared that sand-binder ratio should be below 1.5.