• Korean Journal of Materials Research
• /
• v.24 no.4
• /
• pp.201-206
• /
• 2014

TiC-21 mol% Mo solid solution (${\delta}$-phase) and TiC-99 mol% Mo solid solution (${\beta}$-phase), and TiC-(80~90) mol% Mo hypo-eutectic composite were deformed by compression in a temperature range from room to 2300 K and in a strain rate range from $4.9{\times}10^{-5}$ to $6.9{\times}10^{-3}/s$. The deformation behaviors of the composites were analyzed from the strengths of the ${\delta}$- and ${\beta}$-phases. It was found that the high strength of the eutectic composite is due primarily to solution hardening of TiC by Mo, and that the ${\delta}$-phase undergoes an appreciable plastic deformation at and above 1420 K even at 0.2% plastic strain of the composite. The yield strength of the three kinds of phase up to 1420 K is quantitatively explained by the rule of mixture, where internal stresses introduced by plastic deformation are taken into account. Above 1420 K, however, the calculated yield strength was considerably larger than the measured strength. The yield stress of ${\beta}$-phase was much larger than that of pure TiC. A good linear relationship was held between the yield stress and the plastic strain rate in a double-logarithmic plot. The deformation behavior in ${\delta}$-phase was different among the three temperature ranges tested, i.e., low, intermediate and high. At an intermediate temperature, no yield drop occurred, and from the beginning the work hardening level was high. At the tested temperature, a good linear relationship was held in the double logarithmic plot of the yield stress against the plastic strain rate. The strain rate dependence of the yield stress was very weak up to 1273 K in the hypo-eutectic composite, but it became stronger as the temperature rose.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.32 no.3
• /
• pp.369-374
• /
• 1987

Relationships among root yield, planting density (PD), missing plant rate (MR), leaf area index (LAI) , leaf area per plant(LAP), root weight(RW), number of harvested root(RN) and leaf fall plant rate (LFP) were investigated by survey of white ginseng plantations in Pungi and Geumsan area. In Geumsan PD was about twice than in Pungi but yield was low with high rates of MR and LFP. Yield depended on RN in high PD cultivation while on RW in low PD. The effect of MR on yield was prominent in high PD cultivation. PD showed insignificant negative correlation with yield and no clear relation with MR. RN depended on PD and was especially limited by MR, Yield depended on LAI at harvest time and especially at maximum growth time. LAI was not different between high and low PD area but depended only on RN in high PD and only on LAP in low PD area, and limited by MR in both PD. LAP depended highly on RW and this fact seems to be the very reason that LAI could not increase with the increase of PD. All fields showed the suboptimum LAI.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.6
• /
• pp.901-903
• /
• 1999

Twenty-four multiparous crossbred Friesian dairy cows (60-90 days in lactation) were randomly assigned into a $2{\times}2$ factorial arrangement in a randomized complete block design. Factors were two levels of concentrate supplementation (1:2, high vs 1:1.2, very high; concentrate:milk yield) and two levels of high-quality feed block (HQFB) supplementation (non vs ad libitum block licking). Ruzi grass (Brachiaria ruziziensis) was fed as a roughage throughout the 70 day feeding trial. High level of concentrate fed group resulted in higher roughage and HQFB intakes, compared with very high concentrate supplemented group. HQFB supplementation tended to increase roughage intake and significantly improved milk yield (2 kg/hd/d in high concentrate supplementation) and quality (% fat) which resulted in higher economical return. HQFB was recommended to be used as a strategic supplement in lactating dairy cows especially when fed on low-quality roughages or crop residues.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.23 no.6
• /
• pp.475-483
• /
• 1990

An assessment of Kuwait's commercial fish stocks: hamoor (Epinephelus tauvina), zobaidy (Pampus argenteus), nakroor (Pomadasys argenteus) and sheiry (Lethrinus nebulosus), was conducted using length-frequency data, mean growth and mortality estimates obtained during 1981$\~$1988. The length-cohort analysis indicated that increases in fishing effort would not lead to long-term gains in yield of the stocks at the current estimate of natural mortality rate (M). At high M which was assumed arbitrarily, some benefit in yield could be obtained, especially for hamoor and sheiry. At low M, the yield of all stocks decreased with increased fishing effort. Increases in fishing effort resulted in significant dec-line in spawning stock size for all the stocks. Yield-per-recruit analysis indicated that, un-der low M assumption, a higher yield can be obtained for zobaidy and nakroor by reducing fishing effort. At moderate M, decreases in fishing effort brought gains in yield per recruit of the stocks, but it was not substantial compared with the present level of M. At high M, most of the stocks reached the maximum yield-per-recruit. Overall, increased fishing effort either will not be associated with large long-term gains in yield or, in some stocks, might cause a decline from the present level.

• Korean Journal of Food Science and Technology
• /
• v.22 no.2
• /
• pp.199-205
• /
• 1990

With a view to improving the method of rice marketing quality estimation, vaietal milling characteristics and apparent qualities were studied and their statistical interrelationships were computed for 2 years crops, using 22 varieties of Japonica type and Japonica x Indica type (Tongil). The milling yield was the highest for Japonica, while the broken rice yields was the highest for Japa.xInd. type. But bran yield did not show any significant differences among rice types. Milling factors were volume weight of brown rice, dehulling yield, and Polishing yields; the better these factors, the higher the yield. High apparent quality milled rice with high milling yield were produced from rice types whose broken rice, chalked rice, husk yield and bran yield were little and/or low.

• Journal of Korean Society of Steel Construction
• /
• v.17 no.4 s.77
• /
• pp.395-405
• /
• 2005

This paper summarizes the test results of the flexible-stiff mixed system for the effective use of high-strength steel. Steel with a high degree of strength and performance is being increasingly required as buildings get larger and taller. High-strength steels cannot be used for many applications, though, because they have a number of defects. For instance, they have a high yield ratio, a small strain in maximum stress, and equal Young's modulus compared to mild steels. A new structural system is needed to effectively use high-strength steels with some defects. This paper proposes the flexible-stiff mixed system for the effective use of high-strength steels with high yield ratios. The possibility of using the system is discussed through the test of flexible-stiff mixed columns with high-strength steels. The main variable of the specimens is the yield displacement ratio, including both the force ratio and the stiffness ratio. The proper yield displacement ratio is proposed by adopting the flexible-stiff mixed system. The test results showed that the proposed flexible-stiff mixed system has a high capacity for energy absorption and the highest capacity for energy absorption when the yield displacement ratio of the flexible element to the stiff element ranges from 2.7 to 3.3.

• Korean Journal of Soil Science and Fertilizer
• /
• v.5 no.1
• /
• pp.33-39
• /
• 1972

For the increase of productivity, canopy structure and nutritional status in various productivity grades (high>700, medium>600 and low>500kg/l0a as head rice) were investigated in a study using Jinheung(Oryza sativa L.) for the increase of producticity with following results: 1. High yield plot showed greater leaf area and slow decrease of it after heading stage. While low yield plot had rapidly decrease of leaf area. 2. High yield plot showed higher light transmission ratio (LTR) durnig early grow stage, low LTR. during late grow stage, and higher leaf area per LTR. 3. Net assimilation ratio was decrease with the increase of leaf area index (LAI) and it was always higher in high yield plot. 4. High yield plant had greater amount of total nitrogen uptake, slow uptake rate, and considerable uptake after heading while low yield plant showed higher uptake of nitrogen in early stage of growth and no uptake after heading. 5. The percent ratio starch at heading to total at harvesting was 40% for low yield plant and 10% for highyield plant inderting that high yield depends much on past-heading starch synthesis. 6. Main factor determining secondary yield was ripened grain ratio.

• Transactions of Materials Processing
• /
• v.20 no.8
• /
• pp.595-600
• /
• 2011

This paper investigates the effect of strain rate on the anisotropic deformation behavior of advanced high strength steel sheets. Uniaxial tensile tests were carried out on TRIP590 and DP780 steel sheets at strain rates ranging from 0.001/sec to 100/sec to determine yield stresses and r-values at various loading angles from the reference rolling direction. R-values were determined by the digital image correlation technique. Hill48 and Yld2000-2d yield functions were tested for their capability to describe the plastic deformation anisotropy of the materials. Initial yield loci were constructed using the Yld2000-2d yield function, which adequately described the anisotropic behavior of the materials. The shape of the initial yield loci was found to change with different strain rate, and the anisotropic behavior decreased with increasing strain rate.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.7 no.1
• /
• pp.1-29
• /
• 1969

Experiments on rice concerning it s varieties, fertilization, seedling dates and herbicides have been conducted to determine the most desirable method of direct sowing cultivation on dry paddy field land in the middle part of Korea. The results obtained at the Office of Rural Development of Choongnam Province are as follows:. 1. Sixteen different derivatives from the main varieties of low land rice were cultivated on a dry paddy field by the direct sowing method; at the same time, a few varieties were tried adopting the common transplanting cultivation method. The yield and yield factors from these two groups were examined to give the following results: a) Compared to the common transplanting cultivation, the direct sowing method showed remarkably increased number of panicles while the number of flowers per panicle was shown to be significantly decreased. The maturing ratio was detected to be lowered. The yield horn them differed according to the different varieties : good yield was obtained from Hokwang while Norin ＃25 proved poor when compared with the common transplanting cultivation method. b) Among sixteen varieties tested, Sunsou, Norin ＃25, Jaigou, Hokwang, Palkueng and Gosi showed comparatively high yields, their yield being more than 325 kilograms per 10 Are, but Nampoong, Paldal, Nongkwang, Norin ＃29, Eunbangju ＃101 and Shiro gane showed less yield, their yield being less than 271 kilograms per 10 Are, the relations between the yield and the yield factors can be summarized as follows; Number of varieties and their rice yield. 1) The varieties which were great in the, number of panicles and high in yield=Jaigoun, Hokwang Palkueng and Gosi. 2) The varieties which were low in the number of panicles and high in yield=Sounsou and Norin ＃25. 3) The varieties which were great in the number of panicles and poor in yield=Eunbangju ＃101 and Sirogane. 4) The varieties which were poor in the number of panicles and poor in yield: Nampung, Paldal and Norin ＃29. Number of flowers per panicle and yield. 1) The varieties which were great in the number of flowers per panicle and high in yield: Sounsou, Norin ＃25 and Gosi. 2) The varieties which were poor in the number of flowers per panicle and high in yield ; Jaigoun, Hokwang and Palkueng. 3) The varieties which were great in the number of flowers per panicle and poor in yield: Paldal and Nampung. 4) The varieties which were poor in the number of flowers per panicle and poor in yield: Norin ＃29. Eunbangju ＃101 and Sirogane. Maturing ratio and yield. 1) The varieties which were high in the maturing ratio and high in yield: Jaigoun, Sounsou, Norin ＃25 and Palkueng. 2) The varieties which were low in the maturing ratio and high in yield: Hokwang and Gosi. 3) The varieties which were early maturing rat io and low in yield: Hokwang and Gosi. 4) The varieties which were late maturing ratio and poor in yield: Eunbangju ＃101, Nampungand Sirogane 1, 000 grain weight and yield. 1) The varieties which were heavy in 1, 000 grains weight and high in yield=Norin ＃25 and Hokwang. 2) The varieties which were light in 1, 000 grains weight and high in yield=Sounsou and Jaigoun. 3) The varieties which were heavy in 1, 000 grains weight and poor in yield=Nongkwang and Eunbanju. 4) The varieties which were light in 1, 000 grains weight and poor in yield=Norin ＃29 and Sirogane. 2. The experiment on fertilization showed that the most desirable amount to be given per 10 Are was 10 kilograms of Nitrogen, 5 kilograms of phosphate and 6 kilograms of potassium; and when the Nitrogen given exceeded 8 kilograms, its effect was better when given in amsll consecutive (split) amounts, while the maturing ratio and the number of the flowers per panicle increased when Nitrogen was given in large amount during the later stage of growth of rice. 3. The experiment on the date and amount of seedling showed that the tested variety, Sunsou gave the best results when planted on the days between 25 April and 10 May. Eight liters per 10 Are were preferable if planted early and 12 liters per 10 Are if planted late. The reason why the later planting gave a lower yield was that the number of flowers per panicle was fewer. 4. The experiment on the irrigation for rice with direct sowing cultivation immersed in water showed that it was the most satisfactory when irrigated on 25th June, 55 days after its seedling, its plot giving the best yield. The plots 10th June and 15th July showed just as good results. However, irrigated later, than 15th July it showed lower yields. 5. Compared to the yield of the plot controlled by the common method, the yield from the plots treated with chemical herbicide such as LOROX, TOK, PCP, SWEP, Mo-338 on dry condition soil seemed poorer, but significant difference was not found statistically. On the other hand in the case where chemical herbicides such as TOK, Mo-338, Stam F-34 or ORDRAM were used after irrigation, the yield from the ORDRAM and TOK treated plots did not show significant differences compared to the common hand weed controling method, but those treated with chemicals other than the above showed a lower yield.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.1
• /
• pp.59-63
• /
• 1999

Yield and growth characteristics were compared for five rice cultivars; a new Tongil-type, so called "super-rice", Dasanbyeo, an old Tongil-type Milyang 23, two japonicas Dongjinbyeo and Ilpumbyeo, and a new plant type (NPT)line IR65600-27-1-2. The objective of this stusy was to clarify the high yielding capacity of Dasanbyeo in terms of growth characteristics. The average grain yield (9 t/ha) of Dasanbyeo was higher than that of Milyang 23 by ca. 9% that of japonicas by 20 to 30%, and that of NPT line by ca. 100%. The higher grain yield of Dasanbyeo was attributable not only to the greater dry matter production but also to the higher harvest index (HI). Dasanbyeo showed the greatest dry matter at harvest owing not only to the rapid leaf expan-sion at early growth stage and the resulting high LAI through the entire growth stage but also to the high NAR despite the high LAI. The rapid leaf expansion of Dasanbyeo at early growth stage seemed to be related in part to the profuse tillering capacity. HI was 0.53 in Dasanbyeo, 0,51 in Milyang 23, 0.41 in japonicas, and 0.35 in NPT line. Dasanbyeo was indebted for its higher HI to the relatively high grain filling ratio in spite of a much greater sink size than the other cultivars. Dasan had a greater source to sink ratio during grain ripening as measured by LAD/spikelet and dry matter production/spikelet which showed positove correlations with the grain ripening ratio. New plant type (NPT) line showed the lowest grain yield owing to the small sink size and the low grain filling ratio which seemed to have resulted from the abundant occurrence of weak-strength spikelets. The weak sink strength, in turn, seemed to have suppressed photosynthesis during the grain ripening stage.