• 기술사
• /
• 제32권6호
• /
• pp.77-79
• /
• 1999

This paper has the general idea and definition of product design in industrial design which creates high value added for new products. In addition, it has the relationship to be desired between the engineers and product designers, while developing the products. This paper briefly introduces the role and ability of the product design professional engineers with the best skills approved by the nation.

• 산업경영시스템학회지
• /
• 제41권1호
• /
• pp.70-83
• /
• 2018

Korea's five leading industries-chemical, automobile, shipbuilding, metal and electronics-have been the growth engines of the Korean economy for the last 30 years. However, with their performance weakening in the past few years, Korea's annual growth rate has dropped to less than 2%. Just as the Japanese economy struggled through the lost decades, Korea's leading industries have been facing signals of arriving at a Strategic Inflection Point ("SIP") since the mid-2000s. The objective of this study is to present an appropriate value strategy for Korean firms in leading industries to gain sustainable competitive advantages. This paper examines the following issues : First, it diagnoses the signs and timing of SIP for the five leading industries. Second, this study examines 78 Korean and Japanese firms in order to understand the adaptation strategies of the highest and lowest performing firms from a value strategy point of view. Third, it empirically analyzes the correlation between the indicators of value strategy and the accounting performances of the Korean and Japanese firms. The data set used in the cluster analysis were collected from KISLINE database of NICE Information Service and annual reports. The findings in the case analyses of high and low performing companies show that high value-added specialty chemical materials and electronic component manufacturers that had a strong focus on value creation were defined as high performing companies. And in the cosmetic and automobile industries, companies with a strong emphasis on value appropriation gained high performance. Furthermore, the study conducted a cluster analysis based on two indicators R&D and advertisement expense. The analysis shows that a significant gap exists in the operating incomes among three groups classified under the value strategy. The study recommends that Korean firms are requested to increase R&D expenditure, conduct M&A and collaborate with companies that own source technologies to narrow the technology gap and improve their segment portfolio from commodity to value-added products.

• 한국정보통신학회논문지
• /
• 제20권1호
• /
• pp.103-109
• /
• 2016

정보보호 산업은 기술집약적, 고부가 가치 산업이다. 한국은 우수한 ICT 기술과 다양한 사이버공격에 대응 경험과 기술을 보유하고 있어, 전 세계의 벤치마킹 대상이 되고 있다. 하지만 국내 정보보호기업의 영세성과 함께 지원인프라는 부족하다. 국내 정보보호 산업을 활성화하는데 일차적인 조건은, 해외진출이다. 부가가치가 높은 제품과 서비스의 해외 수출을 위해서는, 국내 IT 정보보호 산업의 해외진출 거점 인프라의 설립 추진이 필요하다. 국내 정보보호 산업을 분석해보니, 자본의 영세성과 해외 현지 진출의 판로개척, 관련 정보, 인력 부족이 문제점으로 나타났다. 무료 AS기간의 비용까지 합치면, 사실상 손실이 발생한다. 따라서 정보보호 산업 해외 거점의 인프라 구축에 관한 연구가 필요하다. 해외 거점의 인프라의 선정 방법과 선정 원인을 분석한다. 해외 거점의 인프라를 활용하여 부가가치를 올릴 수 있고, 정보보호 산업 중소기업들이 수출을 활성화하기 위한 해외 거점의 인프라를 연구를 한다.

• 패션비즈니스
• /
• 제14권4호
• /
• pp.91-101
• /
• 2010

This paper has the purpose of suggesting a development-method on the fashion products that would secure the competitiveness in the global markets through creating supersensitive practical products on the basis of developing originative fashion-goods being made of jacquard that is fine quality of couture. This paper has collected data through the cases of the developed nations in fashion, precedent studies and all the related literature on the subject. The results of this researching are as following: The first, it is expected that the necessity of developing new fashion products would be appealed toward the prestige group of consumers who are seeking for the fine quality and super-sensitivity in female fashion in Korea, and it is the current situation that the products made of jacquard are gradually expanding not only in the area of apparel, fashion goods and interior but also another areas. The current situation of the global market suggests the necessary strategy of survival, that is, the development of supersensitive materials and creative products which would be able to keep the high quality and lower the selling price through cost reduction. The second, the suggestion of the direction in developing the products of the female fashion made of jacquard has two points - the development of the texture that would realize a unique form and the development of the material that would be able to realize planar pattern and three dimensional pattern which are woven with thin and light materials with various solidity and delicacy through various techniques of mixing and three dimensional expression. The third, the expected ripple effect and utilization generated from the development of fashion products are as followings: As material characteristics of jacquard, It needs the specialization of various techniques and specialized production system in using jacquard, and the specialized technique and system would make it possible to produce not only the higher value-added products through expressing affluent colors and delicate design but also competitive products through cutting the process and cost, eventually, it would lead to the expansion of the jacquard market of super-sensitive prestige. Therefore, it is remarkable that various development of products toward the global market and the prestige female fashion market can suggest the vision that make the national fashion industry develop into the higher value-added knowledge industry integrating technology and culture.

• 패션비즈니스
• /
• 제10권3호
• /
• pp.23-30
• /
• 2006

Various high-touch textile products have been developed recently including ultra-fine denier filament yarn fabrics. The touch or hand of high value-added products is of prime importance. Physical and mechanical properties of fabric specimens, ultra-fine denier filament yarn fabric specimen, 100% wool fabric and wool/polyester 50:50 fabric,were measured using the KES. Compressibility of the ultra-fine denier fabric is recommendable, possibly due to the good bulk property of the specimen. Overall, the THV of the ultra-fine denier fabric is positioned between those of the 100% wool fabric and wool/polyester 50:50 fabric. Observed differences in the physical and mechanical properties explain the fabric specimen characteristics reasonably.

• 한국식품저장유통학회지
• /
• 제25권1호
• /
• pp.19-26
• /
• 2018

본 연구는 저장성이 낮아 폐기되는 복숭아를 활용하여 고추장을 담금하여 품질 특성을 조사하였다. pH, 당도, 염도, 환원당, 회분 및 열량은 시판 고추장에 비하여 복숭아 고추장이 낮은 경향을 보였으나, 산도 및 수분은 복숭아 과육의 높은 유기산 및 수분의 함량으로 다소 높은 결과를 얻었다. 유리당 함량의 비교에서 glucose는 시판 고추장이 복숭아 고추장에 비하여 높은 함량을 보였지만, fructose와 maltose는 복숭아 고추장에서 높은 함량을 보였다. 3대 영양소의 함량은 단백질과 탄수화물에서 시판 고추장의 함량이 높았으며, 지방은 복숭아 고추장의 함량이 높았다. 무기원소의 함량은 나트륨과 마그네슘에서 시판 고추장이 높게 측정되었으며, 칼륨 함량은 복숭아 고추장에서 높은 결과를 보였다. 페놀 및 플라보노이드의 함량을 비교한 결과, 증류수 추출물에서는 유의적인 차이가 없었지만, 페놀 함량에서 복숭아 고추장의 에탄올 추출물이 시판 고추장의 추출물 보다 더 높은 결과를 가져왔다. 또한, DPPH 및 ABTS 라디컬 소거 활성을 비교한 결과 에탄올 추출물에서는 유의적인 차이가 없었지만, 증류수 추출물에서 DPPH 라디컬 소거 활성이 더 높게 나타났다. 이와 같이 복숭아 품종별 페이스트를 이용하여 제조한 고추장의 이화학적 품질 특성을 조사한 결과, 대부분의 품종에서 시판고추장에 비해 품질이 높게 나타나 상품화의 가능성이 있는 것으로 기대된다. 향후 담금 조건, 관능적 특성, 숙성 기간 및 유통 안전성에 관한 연구가 요망되었다.

• Journal of Dairy Science and Biotechnology
• /
• 제23권2호
• /
• pp.161-166
• /
• 2005

In 1967, cheese was first produced with small scale of mozzarella cheese in Korea. The processed cheese market was highly grown after putting on the market of sliced cheese in the late 1980's, and the various products that complied with well-being trends such as organic and high functional cheese have been produced in the 2000's. The natural cheese opens up a new domestic market after producing camembert and brie cheese in the end of 2004. At present. the cheese market is expanded with differentiated products such as high value added and high functional cheese. The size of domestic cheese market remains about 200 billion won, but it is expected to go over a trillion won on account of growing preference of natural cheese with well-being trends. To promote domestic cheese industry, differentiation policy of raw milk price for cheese, diversification of cheese products, financial support to farm-made cheese industry and automation and processing development to improve productivity should be taken into account in the future in Korea.

• Journal of Dairy Science and Biotechnology
• /
• 제34권4호
• /
• pp.217-229
• /
• 2016

Goat milk production and processing is a dynamic and growing industry that is fundamental to the health of hundreds of millions of people worldwide and is recognized as an important contributor to many national economies. Goat milk has contributed significantly to the economic and nutritional quality of life in developing countries, particularly in the Mediterranean, the Middle East, Eastern Europe, and Latin America. Goat milk has played an important role in the health and nutrition of infants and the elderly, and is also known to be beneficial and therapeutic for people with milk allergies. The potential and value of the nutritional, health, and therapeutic effects of goat milk and specialized goat milk products are now attracting attention. Various products can be made from goat milk based on its chemical properties. In addition, special products such as hair, skin care, products, and cosmetics produced using goat milk have garnered more attention in recent years. Nevertheless, high quality products can only be made from good quality goat milk. Advanced technical treatments are necessary to produce high quality goat milk that meets consumer expectation of nutritional, hygienic, and good sensory products. Good taste has been a critical criterion when deciding to buy and consume goat milk and associated products. However, it may be possible to produce more value-added products that cater to the new trends in consumer needs and thus maintain economic sustainability of goat milk industry.

• 동아시아식생활학회지
• /
• 제12권2호
• /
• pp.141-153
• /
• 2002

Water activity of sausage added Umbelliferaeceae wild plants powder was decreased as storage time was prolonged and all samples were lower than those of the control. During the storage period, pH values of all samples were decreased. Cooking loss and storage loss was decreased as storage time was prolonged and showed differential from added sample. L, a, b values had a tendency to decrease, during the storage period. As the percentage of the wild plants powder in sausage, L, a values were decreased and b value was increased. Total plate counts of bacteria were increased as storage time was prolonged and wild plants powder added sausages were lower than control. Coriander 3.0% added sausage was the lowest total plate counts of bacteria, 1.3$\times$10$^{6}$ at four week'storage. As the percentage of wild plants powder in sausage was increased, total plate counts of bacteria decreased. Springiness, cohesiveness, chewiness, gumminess and hardness value of all sample were increased or decreased as storage time was longer. But they did not showed greatest various with storage time as well as additives. The sensory score of wild plants powder 0.5% added sausage were the highest, but wild plants powder 3.0% added sausage were the lowest. All the sensory score of coriander added sausage were high. The sensory score of all sample were decreased as storage time was prolonged. In wild plants powder 3.0% added sausage, the relationship between color, flavor, chewiness, wetness, taste and overall of sensory evaluation and all item of the textural characteristic showed huh correlation score. When storaging sausage for two weeks, the correlation of relationship between hardness of sensory evaluation and chewiness of textural characteristic was high.

• 한국생산제조학회지
• /
• 제9권3호
• /
• pp.96-102
• /
• 2000

High speed machining aims to raise the productivity and efficiency by making more precise and higher value-added products than any other machining method by means of the high speediness of spindle and feed drive system. The purpose of this study is to investigate the effects of the run-out of endmill on the dimension precision of workpiece and to obtain the fundamental data on high speed machining which is available by machining the side of Al-alloy with solid carbide endmills in high speed machining center and by measuring dimensions and surface roughness. From the results of experimentation following are obtained ; if spindle speed is ultra high in conditions that radial depth of cut and feed per tooth are very small highly precise and accurate products are to be made efficiently with high feed rate. and so we can raise productivity.