• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.970-972
• /
• 2011

2차목 초음속 디퓨져 입구 직경에 따른 진공실 압력 변화를 고찰하였다. 디퓨져 입구는 세 종류로 변화시켰으며 각각의 경우에 대해 전산유체역학을 통해 계산을 수행하였다. 디퓨져 입구 크기에 따른 진공실의 압력 변화를 빠르게 상대비교하기 위해 비점성으로 가정한 Euler 방정식을 지배방정식으로 채택하였다. 결과로부터 디퓨져의 입구크기가 증가하면 진공실의 압력은 감소하는 것을 관찰할 수 있었다.

• Advances in Computational Design
• /
• 제5권3호
• /
• pp.261-276
• /
• 2020

The reasonable layout of vacuum cleaner can effectively improve the collection efficiency of iron filings generated in the process of steel production. Therefore, in this study, the CFD-DEM coupling model and two-fluid model are used to calculate the iron filings collection efficiency of vacuum cleaner with different inclination/cross-sectional area, pressure drop and inlet angle. The results are as follows: The CFD-DEM coupling method can truly reflect the motion mode of iron filings in pneumatic conveying. Considering the instability and the decline of the growth rate of iron filings collection efficiency caused by high pressure drop, the layout of 75° inclination is suggested, and the optimal pressure drop is 100Pa. The optimal simulation results based on two-fluid model show that when the inlet angle and pressure drop are in the range of 45°~65° and 70Pa~100Pa, larger mass flow rate of iron filings can be obtained. It is hoped that the simulation results can offer some suggestion to the layout of vacuum cleaner in the rolling mill.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.700-705
• /
• 2003

The general cooling tower is a device for making a cooling water in refrigerant condensers or industrial process heat exchangers. The present cooling tower have defects with noises, complicated structure and environmental problems. In this paper, we constituted a new water cooling system by using a evaporating latent heat in an enclosed tank, and this system is consisted of an enclosed vacuum tank and water driving ejector system. Several experimental cases were carried out for improvement methods of high vacuum pressure and water cooling characteristics. The ejector performance was tested in case of water temperature variations that flows in the ejector. Based on the vacuum pressure by water driving ejector, the water cooling characteristics were investigated for the vaporized air condensing effects.

• 한국전기전자재료학회논문지
• /
• 제18권5호
• /
• pp.396-400
• /
• 2005

Carbon nanotubes (CNTs) have been well known as electron emitters for field emission applications like FEDs. In this work, we propose as new application a vacuum sensor using CNTs and discuss its current-voltage characteristics as a function of vacuum pressure. The proposed sensor, based on electrical discharge theories in air gap well-known as Townsend theory and as Paschen's law, works by figuring out the variation of the dark current and the initial breakdown voltage depending on the vacuum pressure of air which can ionize through collisions with the electrons accelerated by high electric field.

• 한국진공학회지
• /
• 제19권1호
• /
• pp.1-9
• /
• 2010

진공게이지의 비교교정 방법으로 교정이 가능하고-비교교정은, 2차표준기라고 부르는 교정되어진 게이지와 교정할 다른 게이지의 지시값을 읽어 비교는 방법- 다른 진공관련 실험을 할 수 있는 기체 유량 시스템을 개발하였다. 교정시스템에의 진공용기는 터보분자펌프(TMP)에 의해서 배기하고, 후면에 스크롤펌프를 배치하여 배기시스템을 꾸몄다. 터보분자펌프의 최대허용가능 압력은 펌프의 주입구에서 0.1 Pa까지이며, 이보다 압력이 높아지면 배기속도가 감소하며 압력대 이하의 환경을 조절하기가 매우 어렵게 된다. 현재 133 Pa까지의 높은 압력을 발생시킬 수 있는 새롭게 개발된 기체유량조절시스템은 바이패스 라인에 맞도록 설계된 컨덕턴스-리듀서를 설치하여 터보분자펌프를 안전하게 운용할 수 있도록 하였다. 추가로 진공용기안에 전체압력 범위(0.1 Pa ~ 133 Pa)의 압력을 생성하며 기체 주입과 압력구배를 연구하였다. 압력의 최대 편차는 용기의 위쪽 방향에 위치한 가스 주입구에서 가까운 위치 C에서 1.6%로 나타났다.

• 한국항공우주학회지
• /
• 제38권12호
• /
• pp.1195-1201
• /
• 2010

본 연구에서는 액체 로켓 엔진의 고온 연소 가스를 이용하여 축소형 고고도 환경 모사용 초음속 디퓨저 성능 실험을 수행하였다. 실험 장치는 연소실, 진공 챔버, 디퓨저로 구성되어 있다. 고고도 환경 모사 시험은 연소실 압력이 약 26, 29, 32barg 세 조건으로 수행하였고, 세가지 조건에서 모두 디퓨저는 성공적으로 시동되었으며 진공 챔버 압력이 약 140torr로 형성하였다. 이전의 상온 고압 가스를 이용한 디퓨저의 시동 특성과 비교하였을 때 시동 압력과 압력 분포 등의 시동 특성의 경향성은 유사하였으나, 고온 환경으로 인하여 진공 챔버에 형성되는 압력은 2배 정도 높은 것을 확인하였다. 본 연구 결과는 향후 실물형 고고도 환경 모사 시험 설비를 구축하는데 기초 자료로 활용될 수 있을 것으로 판단된다.

• Journal of Mechanical Science and Technology
• /
• 제16권10호
• /
• pp.1314-1319
• /
• 2002

A mathematical model and control laws for an Electronic-Vacuum Booster (EVB) for application to vehicle cruise control will be presented. Also this paper includes performance test result of EVB and vehicle cruise control experiments. The pressure difference between the vacuum chamber and the apply chamber is controlled by a PWM-solenoid-valve. Since the pressure at the vacuum chamber is identical to that of the engine intake manifold, the output of the electronic-vacuum booster Is sensitive to engine speed. The performance characteristics of the electronic-vacuum booster have been investigated via computer simulations and vehicle tests. The mathematical model of the electronic-vacuum booster developed in this study and a two-state dynamic engine model have been used in the simulations. It has been shown by simulations and vehicle tests that the EVB-cruise control system can provide a vehicle with good distance control performance in both high speed and low speed stop and go driving situations.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권6호
• /
• pp.893-900
• /
• 2008

The heat exchangers in the ships have been changed from the conventional shell & tube type to the plate type due to some merits as a compactness, a high thermal efficiency and a light-weight. In recent. it is reported that the vacuum phenomena were occurred in the seawater outlet piping of a main central cooler (MCC) on the ships. From the viewpoints of a common sense, the vacuum pressure in the seawater piping is rare event and difficult to be convinced because the seawater is pumped into the piping by a seawater pump with a high discharge head. However, the occurrence of a vacuum pressure in the seawater line of an MCC is real situation and often gives a severe damage to a rubber gasket of an MCC with a plate type heat transfer area. In this study, we analyzed the vacuum pressure in the seawater line of an MCC by using the simpl Bernoulli's equation and found that the vacuum pressure in the seawater line of an MCC is inevitable untill the installation postion of an MCC is not lowered.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.247-254
• /
• 2000

The base pressure of vacuum vessel of the KSTAR (Korea Superconducting Tokamak Advanced Research) Tokamak is to be a ultra high vacuum, $10^{-6}{\sim}10^{-7}Pa$, to produce clean plasma with low impurity containments. For this purpose, the KSTAR vacuum vessel and plasma facing components need to be baked up to at least $250^{\circ}C,\;350^{\circ}C$ respectively, within 24 hours by hot nitrogen gas from a separate baking/cooling line system to remove impurities from the plasma-material interaction surfaces before plasma operation. Here by applying the implicit numerical method to the heat balance equations of the system, overall temperature distributions of the KSTAR vacuum vessel and plasma facing components are obtained during the whole baking process. The model for 2-dimensional baking analysis are segmented into 9 imaginary sectors corresponding to each plasma facing component and has up-down symmetry. Under the resulting combined loads including dead weight, baking gas pressure, vacuum pressure and thermal loads, thermal stresses in the vacuum vessel during bakeout are calculated by using the ANSYS code. It is found that the vacuum vessel and its supports are structurally rigid based on the thermal stress analyses.

• 한국분말재료학회지
• /
• 제1권2호
• /
• pp.159-166
• /
• 1994

The variation of the microstructures and the mechanical properties with varying vacuum hot pressing temperature and pressure was investigated in PyM processed 20 vol%) SiCw/ 2124Al composites. As increasing the vacuum hot pressing temperature, the aspect ratio of whiskers and density of composites increased due to the softening of 2124Al matrix with the increased amount of liquid phase. The tensile strength of composite increased with increasing vacuum hot pressing temperature up to $570^{\circ}C$ and became saturated above $570^{\circ}C$, To attain the high densification of composites above 99%, the vacuum hot pressing pressure was needed to be above 70 MPa. However, the higher vacuum hot pressing pressure above 70 MPa was not effective to increase the tensile strength due to the reduced aspect ratio of SiC whiskers from damage of whiskers during vacuum hot pressing. A phenomenological equation to predict the tensile strength of $SiC_w$/2124AI composite was proposed as a function including two microstructural parameters, i.e. density of composites and aspect ratio of whiskers. The tensile strength of $SiC_w$/2124AI were found more sensitive to the porosity than other P/M materials due to the higher stress concentration and reduced load transfer efficiency by the pores locating at whisker/matrix interfaces.