• 제목/요약/키워드: High temperature NaCl

검색결과 296건 처리시간 0.03초

수열법에 의한 calcite$(CaCO_3)$ 단결정 성장 (Growth of calcite$(CaCO_3)$ single crystal by hydrothermal method)

  • 이영국;유영문;박로학
    • 한국결정학회지
    • /
    • 제7권1호
    • /
    • pp.30-35
    • /
    • 1996
  • 수열법에 의해 고온 고압용 autoclave내에서 calcite 단결정을 성장하였으며, 자외-가시영역에서의 투과율 등을 측정하였다. Calcite 단결정 성자에 관해 보고된 광화제로는 6M의 M2CO3(M=K, Rb)와 chloride등이 있는데 강알카리의 경우 성장속도는 크나 autoclave를 백금으로 내장해야 하며 chloride의 경우 자발 핵생성에 의한 성장(spontaneous nucleation and growth)의 경향이 강하여 종자결정위에서 성장하는 것에 비해 autoclave 벽면 위에서 자발 핵생성에 의한 성장이 더 우세한 것으로 알려져 있다. 본 연구에서는 autoclave의 내장재료로 고가의 백금대신 테프론을 사용하고자 성장온도가 테프론의 내온(280℃)에서 NH4Cl을 광화제로 사용하여 calcite 단결정을 성장하였다. 연구결과 NH4Cl 수열용액으로 calcite 단결정을 성장할 때 자발 핵생성을 억제하려면 NaCl 또는 CH3COOH가 소량 첨가된 수열용액에서 온도구배를 6-7℃ 이하로 유지하여 성장하여야 함을 확인하였다. 성장된 calcite의 자외 및 청색 가시영역에서 투과율은 80% 정도로 천연보다 약 10% 높았다.

  • PDF

서울시 대기중 입자상 오염물질의 조성에 관한 연구 (Ionic composition of aerosol particles under urban atmospheres of Seoul, Korea)

  • 한진석;김신도
    • 한국대기환경학회지
    • /
    • 제12권4호
    • /
    • pp.389-398
    • /
    • 1996
  • In order to understand the relative importance of various pathways leading to the production and transformation of aerosols under different atmospheric conditions, the behavior of atmospheric aerosols have been investigated using a high volume tape sample in Seoul for a week period during August 1990. The concentrations of anion $(SO^{2-}_4, NO^-_3, CI^-)$ and cation $(Ca^{2+}, Na^+, NH^+_4)$ species of aerosol samples were analyzed to identify the ionic composition of aerosols and to estimate their relative contributions to aerosol formation. The concentrations of aerosol species were calculated by a multiple regression model. The results of our calculations indicate the existence of various chemical species such as $(NH_4)_2SO_4, Na_2SO_4, CaSO_4, NH_4NO_3, NaNO_3, Ca(NO_3)_2, NH_4Cl$, and NaCl salts. According to our calculations, the most dominant species of aerosol was $(NH_4)_2SO_4$ with the mean concentration of 23.3 $/mu g/m^3$ (66.9%). The proportion of different componts with aerosol (e.g., $NH_4NO_3$ and $NH_4Cl$) was strongly affected by temperature, relative humidity, and partial presure of gases.

  • PDF

거창 열수 맥상광상의 함 금-은 광화작용 (Au-Ag-bearing Ore Mineralization at the Geochang Hydrothermal Vein Deposit)

  • 홍석진;이선진;최상훈
    • 자원환경지질
    • /
    • 제55권2호
    • /
    • pp.171-181
    • /
    • 2022
  • 거창광상은 영남육괴 화강암질 편마암 또는 편마암질 화강암 내에 발달한 열극을 충전하여 생성된 함 금-은 열수 맥상광상으로, 괴상 및 호상 조직과 함께 부분적인 각력상 조직 및 정동의 발달 등 복합적인 조직적 특성을 보여준다. 거창광상의 맥상 광화작용은 구조운동(tectonic break)에 의하여 광화 1시기와 광화 2시기로 구분된다. 광화 1시기는 석영맥의 생성과 함께 주된 함 금·은 광물인 에렉트럼과 함께 황화광물 및 산화광물 등이 미량의 황염광물을 수반 산출한 시기로서, 공생관계와 광물조합 특성 등에 의하여 세 단계의 광화시기(초기, 중기, 후기)로 구분된다. 광화 1시기의 초기에는 주로 황철석, 자류철석, 유비철석 등이 산출되었다. 중기에는 주된 금-은 광화작용이 진행되어 에렉트럼과 함께 황동석, 섬아연석 등의 황화광물과 미량의 함 은 황염광물 등이 산출되었다. 후기에는 황철석, 섬아연석, 방연석 등과 함께 적철석 등이 산출되었다. 광화 2시기는 주 광화작용 이후의 금속 광화작용이 이루어지지 않은 방해석맥의 생성 시기이다. 거창광상의 주된 광화작용은 고온(≥380℃)의 H2O-CO2-NaCl계 열수유체 유입으로 시작되어 초기의 냉각과 비등작용, 중기의 불혼화용융 및 후기의 상대적으로 천부를 순환한 열수유체 또는 천수의 혼입 등에 의하여 ≥380℃~≤210℃의 온도조건에서 7.0 to 0.7 wt. percent NaCl 상당 염농도를 갖는 유체에서 진행되었다. 거창광상의 광물 공생관계 변화는 이러한 열수계의 진화에 의한 온도와 황 분압 조건의 감소 등의 환경변화가 반영된 결과이다. 거창광상은 중열수형 금·은 광상에 대비된다.

광증감제에 의한 Acrylonitrile의 광중합 속도 (I) (Kinetics of Pholopolymerization of Acrylonitrile Using Sensitizer)

  • 설수덕
    • Elastomers and Composites
    • /
    • 제34권1호
    • /
    • pp.3-10
    • /
    • 1999
  • 아크릴로니트릴(AN) 단일중합체를 항온장치가 부착된 광중합반응기내에서 합성하여 최적반응조건하에서 중합속도모델식을 구하였다. AN의 농도($1.8{\sim}7.58mo1/1$), 증감제의 종류($NaSCN,\;KSCN,\;Ba(SCN)_2,\;NH_4SCN,\;ZnCl_2,\;Na_2SeO_3$) 및 농도($10{\sim}60%$), 반응온도($10{\sim}70^{\circ}C$), 에너지 세기($1,000{\sim}9,900{\mu}J/cm^2$)를 변화시켰다. 광증감제의 농도에 관계없이 반응온도 $50^{\circ}C$, 반응시간 3시간에서 균일한 분자량분포를 얻고, 이중 광증감제로 50%의 NaSCN의 경우 다음과 같은 중합속도 모델식을 구하였다. $R_p=0.0142[M]^{0.82}[I]^{0.49}[S]^{0.52}$ exp(-1.33/RT).

  • PDF

고온의 인공해수 중 12Cr강의 부식피로특성에 관한 연구 (Corrosive Characterisics of 12Cr Alloy Steel and Fatigue Characteristics of the Artificially Degraded 12Cr Alloy Steel)

  • 조선영;김철한;배동호
    • 대한기계학회논문집A
    • /
    • 제25권5호
    • /
    • pp.772-778
    • /
    • 2001
  • In this study, corrosion fatigue characteristics of 12Cr alloy steel were investigated in 3.5wt.% NaCl solution of 150$^{\circ}C$ and 4.5bar. Behavior of corrosion fatigue cracks was measured by the indirect compliance method and compared with the results in distilled water and in air. 1) 12Cr alloy steel was susceptible to temperature. Its susceptibility was increased as the temperature was increased. 2) The crack growth characteristics of 12Cr alloy steel in distilled water were similar to 3.5wt.% NaCl solution. 3) The temperature of solution affects to the crack growth characteristics of 12Cr alloy steel. In corrosion solutions of 4.5bar, 150$^{\circ}C$, fracture surfaces of corrosion fatigue crack growth at a/W=0.3 was showed the trans-granular fracture suface. As the crack grew up, it was changed to inter-granular type. In condition of high temperature, The crack growth behaviors of 12Cr alloy steel were remarkable.

Can the Point Defect Model Explain the Influence of Temperature and Anion Size on Pitting of Stainless Steels

  • Blackwood, Daniel J.
    • Corrosion Science and Technology
    • /
    • 제14권6호
    • /
    • pp.253-260
    • /
    • 2015
  • The pitting behaviours of 304L and 316L stainless steels were investigated at $3^{\circ}C$ to $90^{\circ}C$ in 1 M solutions of NaCl, NaBr and NaI by potentiodynamic polarization. The temperature dependences of the pitting potential varied according to the anion, being near linear in bromide but exponential in chloride. As a result, at low temperatures grades 304L and 316L steel are most susceptible to pitting by bromide ions, while at high temperatures both stainless steels were more susceptible to pitting by small chloride anions than the larger bromide and iodide. Thus, increasing temperature appears to favour attack by smaller anions. This paper will attempt to rationalise both of the above findings in terms of the point defect model. Initial findings are that qualitatively this approach can be reasonably successful, but not at the quantitative level, possibly due to insufficient data on the mechanical properties of thin passive films.

발아불량 환경조건에서의 $GA_3$ 침지처리에 의한 들잔디의 종자발아촉진 (Presoaking with $GA_3$ Improves Germination of Zoysiagrass (Zoysia japonica Steud.) Seed on Poor Germination Conditions)

  • 구자형;윤병한
    • 아시안잔디학회지
    • /
    • 제13권1호
    • /
    • pp.21-28
    • /
    • 1999
  • The seeds of Zoysiagrass (Zoysia japonica Steud.) were soaked with GA3 50 ppm and primed with CaCl2 at -1.0 MPa for 4days at 23$^{\circ}C$ to identify presoaking and priming regimes that may improve germination in saline condition and with PEG 8000 at high temperature. Presoaked, primed, and untreated seeds were then germinated at 30 and $35^{\circ}C$. NaCl salinity stress consistently decreased the rate of germination of zoysiagrass seed. GA3 or CaCl2 alleviated the inhibitory effect of salinity on germination. However, total percent germination (G) and T50 of untreated control seeds significantly decreased and prolonged at $30^{\circ}C$ and $35^{\circ}C$ as NaCl salinity stress increased. Presoaked seeds with GA3 50 ppm for 4 days at $23^{\circ}C$ had significantly higher germination and lower T50 than untreated or primed with CaCl2 at -1.0 MPa for 4days at $23^{\circ}C$m and overcame the inhibitory effect of germination derived from PEG 8000. In addition, presoaked seed had higher, faster, and more uniform germination than untreated seeds after sowing in growing media in greenhouse.

  • PDF

폐기물 매립지 주변의 지하수 오염과 오염물질의 지연 특성 (Characteristics of Groundwater Pollution and Contaminant Attenuation at Waste Disposal Sites)

  • 오석영;전효택
    • 대한지하수환경학회지
    • /
    • 제3권1호
    • /
    • pp.37-49
    • /
    • 1996
  • 이 연구에서는 난지도 매립지와 화성매립지를 연구대상으로하여 주변의 지하수 오염 정도를 파악하고, 오염물질들의 지연작용을 밝히며, 최적 오염지시인자를 도출하고자 하였다. 난지도, 김포, 화성 매립지에서 채취된 침출수에 대하여 현장측정과 실내 화학분석을 실시하여 침출수의 물리화학적 수리화학적 특성들을 파악한 결과 침출수는 높은 온도(31.7-40.1$^{\circ}C$)와 높은 전기전도도(14,650-32,800 $\mu$S/cm), 약 알칼리의 pH(7.58-8.45), 낮은 Eh값(-119.4-20.4 mV)을 특징적으로 보이며, 주성분 이온들로서 $Na^{+}$, $K^{+}$, $Ca^{2+}$, $Mg^{2+}$, HC $O_3$$^{-}$, C $l^{-}$ 등이, 부성분 이온들로서 Mn, S $r^{2+}$, $Ba^{2+}$, L $i^{+}$, $F_{-}$, B $r^{-}$ 등이 부화되어 있다. 일반폐기물 매립지인 난지도.김포 매립지의 침출수와 산업폐기물 매립지인 화성매립지의 침출수는 S $O_4$$^{2-}$ , Fe 중금속 원소들의 함량으로 구분된다. 지표수와 지하수의 화학분석, Cl 표준화과정, WATEQ4F 분석 등을 종합하여 앞서 연구된 유선망 분석을 바탕으로 오염물질의 거동을 해석하였다. 또한 Contamination Factor를 통하여 최적의 오염지시인자를 도출하였다. 일반페기물 매립지인 난지도 매립지의 경우 K, Na, Ca, Mg, B, Zn, HC $O_3$, Cl, F, Br, TOC 등이 , 산업 폐기 물 매립지인 화성 매립지의 경우 K, Na, Ca, Mg, B, S $O_4$, HC $O_3$, Cl, F, Br, TOC 등이 뚜렷한 대조를 보이는 좋은 오염지시인자이며, 해안 매립지는 TOC가 가장 적합한 오염지시 인자이다.

  • PDF

우분의 가용화에 대한 마이크로웨이브의 적용성 및 화학적 촉매의 첨가에 따른 효과 (Feasibility of Microwave for the Solubilization of Cattle Manure and the Effect of Chemical Catalysts Addition)

  • 김향기;강경환;이재호;박태주;변임규
    • 대한환경공학회지
    • /
    • 제39권4호
    • /
    • pp.186-193
    • /
    • 2017
  • 마이크로웨이브(MW)는 유전가열에 의한 열적, 비열적 그리고 이온성 전도 효과를 가지며 높은 에너지 효율을 보이므로 유기성 폐기물의 가용화에 대해 효과적인 방법이다. 본 연구는 고형물 함량이 높은 우분을 대상으로 MW를 이용하여 가용화 최적 조건을 도출하고 이를 토대로 MW의 유전가열 특성을 향상시키기 위해 화학적 촉매물질인 $H_2SO_4$과 NaCl을 첨가하여 우분의 가용화율과 가용화 방법에 따른 biochemical methane potential (BMP)을 평가하였다. 우분 고형물 농도 12%와 MW 출력 800 W 및 설정온도 $40^{\circ}C$ 조건에서 70.5 mg $SCOD_{increased}/kJ$로 에너지 대비 최대 가용화율을 보여주었으며, 이때의 SCOD 농도는 원시료 대비 53.2% 증가하였다. 가용화 최적 조건에서 화학적 촉매로 $H_2SO_4$를 주입하였을 경우 MW 단독 처리 대비 SCOD 농도는 36% 증가하였으며, NaCl을 주입하였을 경우 22.7% 증가하였다. BMP test에서도 우분 원시료 대비 MW를 이용한 가용화는 메탄 생성량이 6.7%, $H_2SO_4$를 주입한 MW 가용화는 13.3%, NaCl을 주입한 MW 가용화는 11.3% 증가하였다. 따라서 마이크로웨이브는 우분의 가용화 전처리에 효율적인 수단이며, 마이크로웨이브의 가용화 효율을 높이기 위해서는 화학적 촉매를 이용할 필요가 있다.

자주복(Takifugu rrbripes) 정자의 액상보존 (Short-term Preservation of Sperm in the Tiger Puffer, Takifugu rubripes)

  • 장영진;장윤정;임한규
    • 한국양식학회지
    • /
    • 제10권3호
    • /
    • pp.273-279
    • /
    • 1997
  • 자주복(Takifugu rubripes) 정자의 액상보존을 위한 기초자료를 얻고자, 수조사육한 전장 43.5-45.1 cm, 체중 1.7-2.0 kg의 2-3년생 자주복 수컷을 재료로 하여, 정자의 액상보존 효과를 연구하였다. 희석액으로 marine fish ringer solution과 1% NaCl을 사용하여 7일간 보존하였을 때, SAI와 정자의 생존율이 각각 1.7과 $59.0\pm1.5%,\;1.6$$\;56.7\pm6.2%$로 가장 높았다. 정자를 3-5배로 희석하여 보존하였을 때, 가장 높은 SAI와 정자의 생존율을 보였으며, 보존온도로는 0- 5$^{\circ}C$가 적절하였다. SAI와 정자의 생존율을 높이기 위한 항생제로는 neomycin (800 ppm)이 효과적이었다.

  • PDF