• 한국철도학회논문집
• /
• 제16권4호
• /
• pp.305-310
• /
• 2013

고속철도 교량에서는 상업 운행 중에는 대부분 통과속도가 일정하여 속도별 동적 거동에 대한 실험적 계측 및 분석이 불가능하다. 경부고속철도 2단계 개통 전 시운전 시 KTX 열차의 속도별 시운전이 가능하였으며, 속도별 운행에 대한 교량의 동적응답 계측이 가능하였다. 이 계측 결과는 개발된 교량/열차 상호작용해석에 대한 검증 및 비교 분석으로 연계될 수 있었다. 대부분의 속도대역에서 해석과 실험에 의한 결과가 잘 일치함을 알 수 있었으나, 공진이 발생하는 임계속도 부근 주행에서는 상대적으로 큰 응답 차이가 발생하였다. 본 논문에서는 이에 대한 원인 분석을 수행하였으며, 공진 발생 시 감쇠비 값을 측정 시 응답을 통해 재추정한 결과를 반영한 재해석을 수행하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1583-1593
• /
• 2011

As we see the continuation of the increase in the speed of the High Speed railroad worldwide, there is a concern for a possible problem in the connecting transition zone in the railway infrastructure. Honam High Speed railroad's transition zone in the hub for the rotation structures and other supporting structures such as approach slab, sub slab, approach block, etc. Due to its increase in speed of the design speed, and its important role on the driving stability and credibility of the bearing ground performance, we must seek and fine a prevention plan for a cause of differential settlement, as well as the cause of the derailment. In this dissertation, domestic, as well as international design manuals and the applicability of the control standards are studied. Also through the study target, Honam High Speed railroad zone 4-1, we evaluated the connecting componant of the Yeon-Jeong bridge through the eigenvalue and weight transfer of the train when operated at 300km/h, 350km/h, 400km/h, 450km/h, and were able to achieve detailed assessment by checking track behaviors, looking at various components such as the rotation acceleration according to the inversion of the distance length, displace length, displacement and stress distribution. Through these studied, possibility of operating at 400km/h was evaluated based on the condition of the current design basis.

• 전기학회논문지
• /
• 제66권4호
• /
• pp.740-744
• /
• 2017

Overhead Line is divided by two systems which are OCS (Overhead Catenary Line) and R-Bar (Overhead Rigid Conductor system). R-Bar has an advantage of maintenance and economic aspect comparing with OCS. R-Bar in Korea has developed for the max. speed of 120km/h, but it is evaluated up to the max. speed of 250 km/h in Europe. There are lots of mountains and underground sections in korea, it is really necessary to develop the R-Bar for a high-speed line. In the study, design parameters for the max. speed of 250 km/h of R-Bar was proposed. A bracket space, stiffness, and especially an installation tolerance of contact wire height at a bracket were considered as a parameter, and a dynamic behavior between a contact wire and pantograph was predicted by evaluated FEM simulation tool. The installation tolerance and bracket space are more important for the high-speed system. The proposed parameters was decided very conservative. Because the aerodynamic characteristics of a pantograph in tunnel is more severe than an open route and the simulation tool is not considered the such kind of aerodynamic characteristics.

• 전기학회논문지
• /
• 제66권9호
• /
• pp.1431-1436
• /
• 2017

The high-speed railway of catenary system, supplies a stable electric power supply to the train by satisfying the special conditions between pantograph and trolley wire, which operates more than 250km/h mutually sliding and feeding electric lines. According to Korean Railway Standard KRS PW 0026-13 (R), the standard for the grip strength of the dropper clamp in conventional line is established, but the high-speed railway line is not yet. When the grip strength of the dropper clamp is detached from the catenary line of the high-speed railway line, various problems may occur, such as damage to the pantograph due to the collision and arcing. In this paper, it is expected to be used as a basic data for establishing the durability criteria of the high-speed railway dropper clamp by verifying the dropper clamp on the Gyeong-bu and Honam high-speed line.

• 한국전산유체공학회지
• /
• 제19권1호
• /
• pp.41-46
• /
• 2014

The aerodynamic drag of high-speed train has been calculated and the effect of bogie side fairing on the aerodynamic drag has been investigated. Computational Fluid Dynamics (CFD) simulation based on steady-state 3 dimensional Navier-Stokes equation has been conducted employing FLUENT 12 and the aerodynamic model of HEMU-430x, the Korean next generation high-speed train under development has been built using GAMBIT 2.4.6. Three types of bogie side fairing configuration, the proto-type without fairing, half-covered fairing to avoid the interference with the bogie frame and full-covered fairing have been adopted to the train model to compare the drag reduction effects of the bogie side fairing configurations and the numerical results yields that the bogie side fairing can reduce the aerodynamic drag of the 6-car trainset up to 7.8%. The aerodynamic drag coefficient of each vehicle as well as the flow structures around the bogie system have also been examined to analyze the reason and mechanism of the drag reduction by bogie side fairing.

• 한국산학기술학회논문지
• /
• 제16권12호
• /
• pp.8516-8524
• /
• 2015

궤도틀림은 직접 궤도검측을 통해서도 평가가 가능하지만, 차체 진동가속도의 계측을 통해서도 간접적으로 관리상태를 파악할 수 있으며, 최근 이에 대한 연구가 활발히 진행되고 있다. 이러한 간접적인 방법을 통해 국내 경부고속철도 자갈궤도의 유지보수 수준을 조사하고 평가하기 위하여, 국내 경부고속철도와 프랑스 고속철도(TGV)의 차체 진동가속도 계측을 수행하고 UIC518 규격에 제시된 방법에 따라 차체 진동가속도 계측 데이터에 대한 신호처리를 수행하였다. 차체 진동가속도는 차량의 주행속도에 따라서도 영향을 많이 받으므로, 신호처리된 계측결과를 속도대역별로 구분하여 상하방향 차체가속도 및 좌우방향 차체가속도의 크기에 따른 빈도분포를 계산하였다. 이렇게 계산된 빈도분포로부터 차량 주행속도에 따른 차체 진동가속도의 분포특성을 조사하고 UIC518에 제시된 기준과 비교하였다. 또한, 경부고속철도와 프랑스 고속철도의 상하방향 및 좌우방향 차체가속도의 빈도분포에 대한 정량적 비교분석을 수행하고, 국내 경부고속철도 자갈궤도 구간의 궤도틀림 관리수준을 평가하였다.

• 한국철도학회논문집
• /
• 제17권1호
• /
• pp.43-51
• /
• 2014

철도에서 토공구조물은 입경이 큰 조립지반재료를 주요한 재료로 사용하고 있다. 그러나 이들 재료에 대한 미소변형 거동을 평가할 수 있는 동적물성 산정에 대한 연구는 대형시험장비의 부족으로 거의 이루어지지 않고 있다. 이에 본 연구에서는 국내 철도설계기준에 제시되어 있는 입도분포, 단위중량 등의 기본 조건에 맞는 강화노반(보조도상, 입도조정층), 접속부 자갈재료, 상부노반재료에 대해 대형반복삼축압축시험을 수행하여 저변형률 수준에 따른 정규화전단탄성계수와 감쇠비곡선을 제안하고, 각 재료별로 수식 모델과 계수를 제시하였다.

• 한국정밀공학회지
• /
• 제29권6호
• /
• pp.600-606
• /
• 2012

Upon investigation of the damaged wheels for high speed train it was determined that the damage was caused by rolling contact fatigue during operation of train. The major problems that railway vehicle system using wheel-rail has to face during operation of railway vehicle are rolling contact fatigue, cracks in wheels, cracks in rails and wheel-rail profile wear. If these deficiencies are not controlled at early stages the huge economical problems due to unexpected maintenance cost in railway vehicle can be happened. Also, If the accurate knowledge of contact conditions between wheel and rail can be evaluated, the damage of wheel can be prevented and the maintenance operation can save money. This paper presents the applicability of electro-magnetic technique to the detection and sizing of defects in wheel. Under the condition of continuous rolling contact fatigue the damage of wheel has continuously monitored using the applied sensor. It was shown that the usefulness of the applied sensor was verified by twin disc test and the measured damaged sizes showed good agreement with the damaged sizes estimated by electro-magnetic technique.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 추계학술대회 논문집(I)
• /
• pp.247-252
• /
• 2002

It is expected to confront numerous technological advancements in ter railroad technology with an opening of state-of-art Kyung-Bu High Speed Railroad that permits traveling speed in excess of 300 Km/hr. Expansions of railroad facility such as revival of silk railroad in Eurasia due to the connection of South-North Korea and modernization of rolling stock and ancillary equipment have certainly contributed to the technological development of Korean Railroad. Such technological advancements will provide of opportunities to participate in foreign projects that have been offered in past years. Thus, a comprehensive plan and R＆D policy is necessary to continuously raise and upgrade national competitiveness in the railroad industry.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.393-398
• /
• 2004

From the research which it sees the noise of the high-speed railroad use nation it gave and the vehicle sound arresting tile masturbation which is a sound arresting unit standard it slept and in an environment noise standard side from it classified. The case foreign nation vehicle of the KTX vehicle where vehicle sound arresting from the side the high speed railroad use nations from the open ground with 64-68 dBA are used first of all from domestic and it compares and the efficiency almost is a possibility of knowing the beginning of history box from the interior sound arresting side. Also it will be developed from domestic and to case of the position KHST vehicle the speed 50 km/h is more speed up the KTX vehicle than in spite of the standard which is equal will pay with 350 km/h and it will be having and the possibility the strong point is knowing very from the interior sound arresting side it was. For railroad area along resident at the comfort improvement of the second the environment noise standard which it presents from the nation of most the patronage standard inland conforms in the law standard and the case high speed railroad of the place comparing domestic which is presented is not in spite of still prepared 2004 April commerce is operated standard easily not to be, it appeared with the fact that the speed governing one standard establishment by law is necessary.