• Journal of international Conference on Electrical Machines and Systems
• /
• 제3권1호
• /
• pp.27-31
• /
• 2014

Magnetic fields (MF) generated both on board the vehicle and along the guideway provide levitation and propulsion forces. High speed maglev trains adopt electromagnet or superconducting magnet to realize levitation and propulsion functions. However, stray fields existing in passenger compartment and regions surrounding the vehicle and guideway have effect on passengers and environment. To investigate stray magnetic field effect, model of Transrapid and MLX are studied.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.1073-1075
• /
• 2004

Permanent magnet high-speed machines are small size compared with general motor of the same power and so must minimize generating heat, as well rotor structure is simple and strong for born centrifugal force. Especially, Material of each part is given thermal limit therefore temperature distribution vary important. In this paper, heat transfer coefficient of permanent magnet high-speed machines with 5-kW 40,000 rpm is calculated and temperature distribution due to power loss is predicted by finite element analysis.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제2권2호
• /
• pp.159-164
• /
• 2013

Difficulty of torque measurements in high-speed permanent magnet (HSPM) motors has necessitated the development of improved torque calculations. Hence, this paper presents an analytical torque calculation of a high speed permanent magnet (HSPM) motor based on the power factor angle. On the basis of analytical magnetic field solutions, the equations for circuit parameters such as back-emf and synchronous inductance are derived analytically. All analytical results are validated extensively by non-linear finite element (FE) calculations and measurements. The internal angle (${\delta}$) between the back-emf and the phase current is calculated according to the rotor speed by using analytical circuit parameters and the measured power factor because this angle is not measured but estimated in case of sensorless drive of the HSPM motor, significantly affecting torque calculation. Finally, the validity of the torque analysis method proposed in this paper is confirmed, by showing that the torque calculated on the basis of the internal angle is in better agreement with the measurements.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제2권2호
• /
• pp.216-224
• /
• 2013

This paper describes dual inverter drive for a fractional-slot concentrated winding permanent magnet synchronous machine (PMSM). PMSMs are widely used in many applications from small servo motors to few megawatts generators thanks to its high efficiency and torque density. Especially, fractional-slot concentrated winding PMSM is very popular in the applications where wide operation range is required because it shows very wide constant power speed ratios. High speed operation, however, requires lots of negative daxis current for reducing back-EMF regardless of output torque. Field weakening current does not contribute to the torque generation in surface mounted PMSM case and causes inverter and copper loss. To reduce the losses from field weakening current, this paper proposes PMSM with split stator and parallel dual inverter drive. Proposed parallel dual inverter drive reduces back-EMF and enables efficient drive at high speed and light load situation. Control strategy of proposed dual inverter system is established through loss analysis and simulation. Proposed concept is verified with practical experiment.

• 조명전기설비학회논문지
• /
• 제22권3호
• /
• pp.59-65
• /
• 2008

High-speed electrical motor has been studied for several applications, i.e. for direct-drive systems of centrifugal compressors and turbo blowers. This paper deals with a design consideration of electromagnetic, mechanical and thermal limits of high-speed induction motor for turbo blower. Basic design concept of high-speed motor was proposed. As the motor is to be operated at high speed, the losses are quite different from conventional low-speed machines. Especially, the increases of rotor eddy current and friction losses could lead to an overheated motor. So, we suggested a special cooling system to reduce temperature rise. And, based upon this design concept, the prototype induction motor(37[kW], 45,000[rpm]) for high-speed turbo blower was designed and 2-D electromagnetic field analysis was implemented. Finally, criteria to evaluate the characteristics of high-speed induction motor have been proposed and tested.

• 한국정밀공학회지
• /
• 제32권5호
• /
• pp.431-439
• /
• 2015

One of common challenges in designing modern production machines is realizing high speed motion without sacrificing accuracy. To address this challenge it is necessary to maximize the stiffness of the mechanical structure and the control system with consideration on the main disturbance input, cutting forces. This paper presents analysis technologies for realizing high stiffness in production machines. First, CAE analysis techniques to evaluate the dynamic stiffness of a machine structure and a new method to construct the physical machine model for servo controller simulations are demonstrated. Second, cutting forces generated in milling processes are analyzed to evaluate their effects on the mechatronics system. In the effort to investigate the interaction among the structure, controller, and process, a flexible multi-body dynamics simulation method is implemented on a magnetic bearing stage as an example. The presented technologies can provide better understandings on the mechatronics system and help realizing high stiffness production machines.

• 한국공작기계학회논문집
• /
• 제12권4호
• /
• pp.70-76
• /
• 2003

Braiding machines of maypole type have complex guide tracks. It is not easy to speed up drivers while carriers are moving at high speed. This paper presents a new design approach using dynamic analysis and modeling for moving carriers on the guide tracks. The proposed approach will be shown to be effective by using simulation tool, WORKING MODEL $2D^{\circledR}$, for high speed drivers on new models of braiding machines of maypole type.

• 대한의용생체공학회:의공학회지
• /
• 제15권4호
• /
• pp.475-480
• /
• 1994

For the effective management of medical images, it becomes popular to use computing machines in medical practice, namely PACS. However, the amount of image data is so large that there is a lack of storage space. We usually use data compression techniques to save storage, but the process speed of machines is not fast enough to meet surgical requirement. So a special hardware system processing medical images faster is more important than ever. To meet the demand for high speed image processing, especially image compression and decompression, we designed and implemented the medical image CODEC (COder/DECoder) based on MISD (Multiple Instruction Single Data stream) architecture to adopt parallelism in it. Considering not being a standard scheme of medical image compression/decompression, the CODEC is designed programable and general. In this paper, we use JPEG (Joint Photographic Experts Group) algorithm to process images and evalutate the CODEC.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.621-625
• /
• 1996

The feed system of the machine tools is limited by the mechanical transmission elements. However, thanks to the advanced modern technology, those machines are able to equip with linear motors. In this paper, the types and application aspects of linear motor are discussed and a synchronous type of the linear motors has been applied to X-Y table for machining center. The performance shows an outstanding result in terms of the accuracy, speed and stiffness. Machine tool system with linear motors is expected to be more productive machines using linear motor in the near next years.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.875-878
• /
• 2002

Braiding machines of maypole type have complex guide tracks. It is not easy to speed up drivers while carriers are moving with being at high speed. This paper presents a new design approach using dynamic analysis for moving carriers on the guide tracks. The proposed approach will be shown to be effective by using the simulation tool, WORKING MODEL 2D(equation omitted), for the high speed drivers on new models of braiding machines of maypole type.