• 지질공학
• /
• 제12권2호
• /
• pp.127-135
• /
• 2002

시추공영상자료와 시추조사에서의 RQD자료 및 완전파형음파검층에 의해 측정된 탄성파속도를 이용하여 각 암상에서의 탄성파속도와 RQD와의 상관관계를 검토하였다. 탄성파속도와 절리틈과의 상관관계는 유성일대의 화강암과 팔당일대의 호상 편마암에서 높은 상관성을 보인 반면, 사북일대 퇴적암에서 상관성이 없는 것으로 나타났다. 사북지역의 퇴적암에서는 상관성이 없고, 특히 누적 절리틈이 0∼20mm구간에서 탄성파속도 분포의 분산이 크게 나타나며, 이는 탄질 세일의 파쇄구간이 넓게 분포하여 절리틈 크기의 측정에 무리가 있었을 것으로 추측된다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 추계학술대회
• /
• pp.50-53
• /
• 2006

Regional geophysical surveys and geological cal studies on natural gas hydrate (NGH) in the East Sea were carried out by the Korea Institute of Geoscience and Mineral Resources (KIGAM) from 2000 to 2004. 16 piston cores, 2270 L-km of multi-channel reflection seismic (MCRS) data and 730 L-km of 3.5kHz Chirp data obtained from the southwestern part of the deep-water Ulleung Basin were analyzed in this study. In piston cores, cracks generally developed parallel to bedding suggest significant gas content. The core analyses showed high total organic carbon (TOC) content, sedimentation rate and heat flow of sediments. These are in favor of the general ion of substantial biogenic methane, which can form the NGH within the stability zone of the near seafloor sediments in the study area. The cores generally show also high residual hydrocarbon gas concentrations for the formation of natural gas hydrates The geophysical indicators of the presence of gas and/or NGH such as bottom simulating reflectors (BSRs), seismic blank Bones, pockmarks and gas seeping features were well defined on the MCRS and Chirp data.

• Earthquakes and Structures
• /
• 제12권2호
• /
• pp.191-200
• /
• 2017

In this paper, the seismic performance of reinforced concrete braced frames (RC-BF) under far- and near-fault motions was investigated. Four-, eight-, 12- and 16-story RC-BFs were designed on the basis of a code-design method for a high risk seismic zone. Nonlinear static and dynamic analyses of the frames have been performed using OpenSees software. To consider diverse characteristics of near-fault motions, records with forward-directivity and fling-step effects were employed. From the results obtained in the analytical study it is concluded that the used design method was reasonable and the mean maximum drift of the frames under all ground motion sets were in acceptable range. For intermediate- and high-rise buildings the near-fault motions imposed higher demands than far-faults.

• Earthquakes and Structures
• /
• 제14권4호
• /
• pp.337-347
• /
• 2018

This paper presents some shaking table tests conducted on a 1/4-scaled model with 5-story steel reinforced concrete (SRC) spatial frame with irregular section columns under a series of base excitations with gradually increasing acceleration peaks. The test frame was subjected to a sequence of seismic simulation tests including 10 white noise vibrations and 51 seismic simulations. Each seismic simulation was associated with a different level of seismic disaster. Dynamic characteristic, strain response, acceleration response, displacement response, base shear and hysteretic behavior were analyzed. The test results demonstrate that at the end of the loading process, the failure mechanism of SRC frame with irregular section columns is the beam-hinged failure mechanism, which satisfies the seismic code of "strong column-weak beam". With the increase of acceleration peaks, accumulated damage of the frame increases gradually, which induces that the intrinsic frequency decreases whereas the damping ratio increases, and the peaks of acceleration and displacement occur later. During the loading process, torsion deformation appears and the base shear grows fast firstly and then slowly. The hysteretic curves are symmetric and plump, which shows a good capacity of energy dissipation. In summary, SRC frame with irregular section columns can satisfy the seismic requirements of "no collapse under seldom earthquake", which indicates that this structural system is suitable for the construction in the high seismic intensity zone.

• 지구물리
• /
• 제4권2호
• /
• pp.103-111
• /
• 2001

공주시 능치 지역에 지구물리탐사 방법을 적용하여 비파괴적으로 천부지하에서의 이상체의 존재유무에 관한 정보를 유추하였다. 적용되어진 지구물리학적 탐사 방법은 전기비저항 탐사, 탄성파 탐사, 자력탐사, 중력탐사를 실시하였다. 이들 각 탐사는 고해상의 정보를 제공하는 것으로 해석된다. 전기 비저항탐사 해석결과 주위보다 고비저항을 보이는 이상구간이 나타났으며, 이상구간 중‘M'형태의 이상을 보이고 구간은 지하에 지하 공동이나 그 밖의 지하구조물 및 지질 이상체가 존재할 가능성이 있는 것으로 해석된다. 탄성파탐사 해석결과 저속도층이 지하 심부까지 분포함을 알 수 있다. 이는 지하에 매장되어 있는 지하공간을 지남으로써 나타나는 현상으로 해석되어진다. 탄성파 자료해석에서 이상을 보이는 구간은 비저항 이상을 보였던 구간에 포함되는 범위로 두 탐사 방법의 결과가 잘 일치한다. 자력탐사 결과 전기비저항탐사와 탄성파 탐사에서 이상을 보이는 지역에서 원형의 쌍극자장의 이상을 보이고 있다. 중력탐사 구간에 대해 하부에 주위와 밀도가 다른 이상체가 지하 하부에 존재할 것으로 해석된다. 이상의 각 탐사의 자료 해석을 통하여 천부지하의 정보를 유추한 결과 연구지역 내에서 공통적으로 이상체가 존재하는 것으로 해서되었다.

• Structural Engineering and Mechanics
• /
• 제57권3호
• /
• pp.507-528
• /
• 2016

Reduced beam section (RBS) moment resisting connections are among the most economical and practical rigid steel connections developed in the aftermath of the 1994 Northridge and the 1995 Kobe earthquakes. Although the performance of RBS connection has been widely studied, this connection has not been subject to in the skewed conditions. In this study, the seismic performance of dogbone connection was investigated at different angles. The Commercial ABAQUS software was used to simulate the samples. The numerical results are first compared with experimental results to verify the accuracy. Nonlinear static analysis with von Mises yield criterion materials and the finite elements method were used to analyze the behavior of the samples The selected Hardening Strain of materials at cyclic loading and monotonic loading were kinematics and isotropic respectively The results show that in addition to reverse twisting of columns, change in beam angle relative to the central axis of the column has little impact on hysteresis response of samples. Any increase in the angle, leads to increased non-elastic resistance. As for Weak panel zone, with increase of the angle between the beam and the column, the initial submission will take place at a later time and at a larger rotation angle in the panel zone and this represents reduced amount of perpendicular force exerted on the column flange. In balanced and strong panel zones, with increase in the angle between the beam and the central axis of the column, the reduced beam section (RBS), reaches the failure limit faster and at a lower rotation angle. In connection of skewed beam, balanced panel zone, due to its good performance in disposition of plasticity process away from connection points and high energy absorption, is the best choice for panel zone. The ratio of maximum moment developed on the column was found to be within 0.84 to 1 plastic anchor point, which shows prevention of brittle fracture in connections.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.643-646
• /
• 2005

The gas hydrate exploration using seismic reflection data, the detection of BSR(Bottom Simulating Reflector) on the seismic section is the most important work flow because the BSR have been interpreted as being formed at the base of a gas hydrate zone. Usually, BSR has some dominant qualitative characteristics on seismic section i.e. Wavelet phase reversal compare to sea bottom signal, Parallel layer with sea bottom, Strong amplitude, Masking phenomenon above the BSR, Cross bedding with other geological layer. Even though a BSR can be selected on seismic section with these guidance, it is not enough to conform as being true BSR. Some other available methods for verifying the BSR with reliable analysis quantitatively i.e. Interval velocity analysis, AVO(Amplitude Variation with Offset)analysis etc. Usually, AVO analysis can be divided by three main parts. The first part is AVO analysis, the second is AVO modeling and the last is AVO inversion. AVO analysis is unique method for detecting the free gas zone on seismic section directly. Therefore it can be a kind of useful analysis method for discriminating true BSR, which might arise from an Possion ratio contrast between high velocity layer, partially hydrated sediment and low velocity layer, water saturated gas sediment. During the AVO interpretation, as the AVO response can be changed depend upon the water saturation ratio, it is confused to discriminate the AVO response of gas layer from dry layer. In that case, the AVO modeling is necessary to generate synthetic seismogram comparing with real data. It can be available to make conclusions from correspondence or lack of correspondence between the two seismograms. AVO inversion process is the method for driving a geological model by iterative operation that the result ing synthetic seismogram matches to real data seismogram wi thin some tolerance level. AVO inversion is a topic of current research and for now there is no general consensus on how the process should be done or even whether is valid for standard seismic data. Unfortunately, there are no well log data acquired from gas hydrate exploration area in Korea. Instead of that data, well log data and seismic data acquired from gas sand area located nearby the gas hydrate exploration area is used to AVO analysis, As the results of AVO modeling, type III AVO anomaly confirmed on the gas sand layer. The Castagna's equation constant value for estimating the S-wave velocity are evaluated as A=0.86190, B=-3845.14431 respectively and water saturation ratio is $50\%$. To calculate the reflection coefficient of synthetic seismogram, the Zoeppritz equation is used. For AVO inversion process, the dataset provided by Hampson-Rushell CO. is used.

• 국제강구조저널
• /
• 제18권4호
• /
• pp.1464-1469
• /
• 2018

Steel frames with ductile connections have good seismic performance under strong earthquake, they are now popular for high seismic design. In order to simplify the process of numerical analysis of the steel frames with ductile connections, simplified connection models are introduced, two types of springs are placed in the simplified connection model, which can simulate deformation of the panel zone and members. 6-story-3-bay steel frames with ductile connections are simplified and carried out modal analysis, fundamental periods of the frames predicted by finite-element analysis for simplified steel frame models were compared to the results for actual frame models. 2-story steel frame with reduced beam section connections is simplified and carried out pseudo-static analysis, hysteretic curves and skeleton curves of the frame obtained by finite-element analysis for simplified steel frame model are compared to test results. The comparison show that the difference between them is small, it is reliable and effective to predict mechanical properties of the steel frame with ductile connection by finite-element analysis of simplified steel frame model.

• 국제초고층학회논문집
• /
• 제1권3호
• /
• pp.211-220
• /
• 2012

The current 2002 Indonesian Seismic Code consists of prescriptive criteria that are intended to result in buildings capable of providing certain levels of performance. However, the actual performance capability of buildings is not assessed as part of the code procedures. Several analysis procedures are allowed, and the state of practice is to use the RSA with six-zone seismic map developed for 475-year earthquake. This code is being revised and will adopt many of the ASCE7-10 provisions and 2475-year earthquake for MCE. The growth of tall buildings compels engineers to look for more optimal lateral system. The use of RC core wall as single system has been adopted by very few engineering firms, which is allowed in the current code but will no longer be the case if the new one is in effect. Other innovative structural system such as core wall and outrigger is not addressed in the proposed new code. Engineers must then resort to NLRHA. Currently, one 50-story building under construction using RC core wall and outrigger has been designed with RSA and employing capacity design principles, then evaluated using NLRHA per TBI Guidelines. Based on the evaluation, the performance of the 50-story building generally still meets the criteria of the TBI Guidelines. The result of the case study is presented in this paper.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2009년도 학술대회 초록집
• /
• pp.28-33
• /
• 2009

메탄하이드레이트는 새로운 에너지원으로의 가능성뿐 아니라 지구 온난화의 원인으로도 알려져 이에 대한 연구가 활발하다. 메탄하이드레이트 부존층의 평가에 대한 연구는 BSR의 존재와 지진파 속도로부터 메탄하이드레이트 부존랑을 추정하는 연구가 주가 되고 있으나, 최근에는 지진파 감쇠특성으로부터 메탄하이드레이트의 분포를 추정하는 연구도 시도되고 있다. 본 연구에서는 일본 난카이 트러프에서 취득된 2차원 반사법 지진파 데이터로부터 지진파 감쇠지 ($Q^{-1}$)를 산출하여 메탄하이드레이트 부존층에서의 지진파 감쇠특성을 분석하였다. QVO법을 이용하여 주파수 범위 $30{\sim}70Hz$ 오프셋 범위 $125{\sim}1,575m$내에서 제로오프셋 감쇠치를 추정한 결과, BSR상부의 메탄 하이드레이트 부존층에서 지진파 감쇠지가 크게 증가하는 것을 관찰 할 수 있었다. 따라서 본 연구의 결과를 통해 위 주파수 범위내 반사법 지진파의 메탄하이드레이트 부존층내 감쇠 특성을 확인하였으며, 이를 이용한 메탄하이드레이트 농축대의 추정 가능성을 확인하였다.