• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.05a
• /
• pp.97-98
• /
• 2016

It is important to manage an educational facility used by many students. The office of education has responsibility to manage public school facilities instead of most elementary, middle, and high schools. Some school or university outsources facility management and maintenance. An international school in Jeju is established by BTL (Build-Transfer-Lease) that includes construction and maintenance. This research objective is to analyze the case of facility management in the international school, and to provide improved method for school maintenance.

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.11 no.1
• /
• pp.32-41
• /
• 2012

According to the educational statistics and information data, there were 11,317 elementary school, middle school and high school facility as of 2011. During the post decade, 1,256 schools are increased. The school facility maintenance is the important factor for the whole facility life cycle because it determines the useful life of a facility. Current school facility maintenance practices tend to ad-hok kery, namely, repairment is made after a problem is discovered. The purpose of this study is to propose the new maintenance works and management system to improve the process of maintenance. In addition, the authors suggested school facility improvement plan based upon the questionnaire survey of related management officials.

• Journal of the Korean Institute of Educational Facilities
• /
• v.15 no.2
• /
• pp.16-26
• /
• 2008

This study investigates the results of planning high school facility in accordance with the scope of the 7th educational curriculum by employing user satisfaction methodology. A high school in On-Yang, built recently to fulfill the objective of the curriculum was investigated in detail. Structured interview survey on both students and teachers were done while observation of the entire facility was carried out at the same time. Based on analysis of the interview and the observation, questions were developed, and subsequently questionnaire surveys, focused on how satisfied the students were regarding the school facility and what improvements could be made, were completed. The findings suggest that the degree of variation in planning class room should be employed considerably, as well as the efficiency of route among the facility blocks. Aspects of the other planning factors such as storey height, location of doors and windows, and equipments regarding the purpose of class room are additionally discussed.

• Journal of the Korean Institute of Educational Facilities
• /
• v.16 no.5
• /
• pp.3-10
• /
• 2009

The purpose of this study is to provide an remodification method for elementary school complex facilities in Seoul Metropolitan city. This study analyzes the questionnaire survey for 568 entire elementary schools and the questionnaire survey for school facility complex project operated 44 elementary schools. Then the result of this study was deduced from the comparison between the 568 entire survey data and 44 survey data in terms of the cognition of school facility complex project, the required type of facility and the problems of complex facility maintenance and operation. Four major findings were revealed as the result of research. First, there is a very high agreement with the school facility complex projects. Second, it was need that the process of planning and design was remodified to enhance participation of parents of students and local residents for selecting an appropriate complex facility. Third, education environment and student safety should be protected from any other school facility complex environments. Fourth, an agreement and regulation is needed for more effective maintenance and operation of school complex facilities.

• Journal of Korean society of Dental Hygiene
• /
• v.16 no.4
• /
• pp.585-590
• /
• 2016

Objectives: The purpose of the study was to investigate oral health-related behaviors of some elementary school students by installation of toothbrushing facility. Methods: A self-reported questionnaire was completed, out by 377 elementary school students with toothbrushing facility, and by 260 elementary school students with no toothbrushing facility in M city from November to December, 2015. The data were analyzed by ${\chi}^2$-test, t-test and stepwise multiple regression analysis using SPSS 12.0 program. The questionnaire comprised toothbrushing practice(2 items), satisfaction of toothbrushing facility(1 item), oral health knowledge(4 items), fluoride recognition(1 item), and necessity of fluoride mouthrinse(1 item). Results: The level of oral health knowledge was high in toothbrushing facility school. But toothbrushing practice was higher in school of no toothbrushing facility(63.8%) than the school with toothbrushing facility(49.1%)(p<0.001). The number of brushing times a week was also higher in school of no toothbrushing facility(1.98 times) than the toothbrushing facility school(1.59 times)(p=0.011). The dominant reason for no brushing was not recognition(65.8%) in toothbrushing facility school, lack of places(61.3%) in non toothbrushing facility school. Conclusions: In order to improve the oral health in elementary school students, it is necessary to provide toothbrushing education and toothbrushing facility in elementary schools.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.19 no.3
• /
• pp.73-82
• /
• 2015

A high altitude test facility which includes supersonic diffuser and ejector has been developed to simulate atmospheric pressure at 25 km using a 500 N class small scale liquid rocket engine. Also high altitude simulation test for the small scale liquid rocket engine was performed to verify the facility's performance. The experimental facility consists of high altitude simulation device, propellants supply system and coolant supply system. Low pressure condition corresponding to about 27 km(0.021 bar) altitude atmosphere was successfully simulated and a small scale liquid rocket engine thrust level was confirmed at the simulated condition by the high altitude test facility verification test.

• 한국태양에너지학회:학술대회논문집
• /
• 2009.04a
• /
• pp.256-262
• /
• 2009

Purpose of this study is embody the environmental-friendly military facility model that applied renewable energy, passive design method and high efficiency equipment. In the introduction of this study, defined problem of existing military facility and classification of military facility are performed. Also, environmental friendly military facility is defined through classified by scale and building equipment method. In the renewable energy chapter, photovoltaic system and wind turbine system are considered And then, LED light, photovoltaic panel, motor, inverter are analyzed in the high efficiency equipment chapter.

• Nuclear Engineering and Technology
• /
• v.53 no.12
• /
• pp.3879-3891
• /
• 2021

A heat pipe residual heat removal system is proposed to be incorporated into the reactor driven subcritical (RDS) facility, which has been proposed by MIT Nuclear Reactor Laboratory for testing and demonstrating the Fluoride-salt-cooled High-temperature Reactor (FHR). It aims to reduce the risk of the system operation after the shutdown of the facility. One of the main components of the system is an air-cooled heat pipe heat exchanger. The alkali-metal high-temperature heat pipe was designed to meet the operation temperature and residual heat removal requirement of the facility. The heat pipe model developed in the previous work was adopted to simulate the designed heat pipe and assess the heat transport capability. 3D numerical simulation of the subcritical facility active zone was performed by the commercial CFD software STAR CCM + to investigate the operation characteristics of this proposed system. The thermal resistance network of the heat pipe was built and incorporated into the CFD model. The nominal condition, partial loss of air flow accident and partial heat pipe failure accident were simulated and analyzed. The results show that the residual heat removal system can provide sufficient cooling of the subcritical facility with a remarkable safety margin. The heat pipe can work under the recommended operation temperature range and the heat flux is below all thermal limits. The facility peak temperature is also lower than the safety limits.

• Journal of Korean Society of Rural Planning
• /
• v.23 no.3
• /
• pp.121-131
• /
• 2017

Although the educational facility are an important considerations on a social equity standpoint, educational environment in rural areas has been continuously deteriorated by numerous social problems such as decreasing birth rate and increasing of local school closing. The purpose of this study is to evaluate the accessibility of educational environment in rural areas on village level. First, we evaluate physical accessibility based on legally defined commuting distance. Second, the implication of village population of potential accessibility is analyzed. Lastly, the facility centrality index of each village is estimated for assessing the relations of educational accessibility. The main results of this study are as follows; (1) The accessibility of most villages in Pyeongchang-gun is vulnerable that 81.10% for elementary school, 73.17% for middle school, and 82.32% for high school, respectively; (2) The average commuting distance per student considering estimated number of students for each educational facilities indicated 2.75km for elementary school, 4.37km for middle school, and 5.79km for high school; (3) the facility centrality index is highly correlated to educational facilities but not to village population.

• Journal of Korean society of Dental Hygiene
• /
• v.14 no.2
• /
• pp.173-179
• /
• 2014

Objectives : The purpose of this study is to provide the basic data for the development of oral health education program and to make schoolchildren practice the right oral health care behaviors. Methods : Data were collected from 259 elementary school students including 134 boys and 125 girls in Busan from November 26 to December 20, 2012. The groups were tooth brushing group and dental clinic group. All statistical analyses were analyzed by frequency analysis and chi-square test using SPSS 18.0 program. Results : School dental clinic group showed higher awareness level of fluoride and sealant effect of prevention(p=0.000). Toothbrushing facility group showed higher awareness level of brushing tooth(p=0.011). School dental clinic group showed higher awareness level of fluoride toothpaste(p=0.000). Both school dental clinic group and toothbrushing facility group showed higher awareness level of oral health education(p=0.001). School dental clinic group showed higher awareness level for tooth brushing method after education(p=0.000). Both school dental clinic group and toothbrushing facility group showed higher level of education. Conclusions : School dental clinic group showed higher level for oral health knowledge and toothbushing facility group showed high level for oral health behavior. Both School dental clinic group and toothbrushing facility group showed higher level of oral health education and tooth brushing method after education. Both school dental clinic group and toothbrushing facility group proved to promote oral health. Activation of school toothbrushing facility is very important to change the oral health workforce.