• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.1
• /
• pp.743-750
• /
• 2009

Since aerial photogrammetry by analog camera began in 1972, recently, high resolution digital camera is actively introduced to improve efficiency of aerial photogrammetry. This study investigated the 3D positioning accuracy of DMC(Digital Mapping Camera) among various high resolution aerial digital cameras to be developed for photogrammetry. For the research, we installed control points in test field around Incheon, and acquired analog and digital aerial photographs. By comparing 3D positioning accuracies of analog and digital photographs, there are few difference between two cameras, and the 3D positioning accuracies of two cameras was somewhat increased in case of aerotriangulation using additional control points based on GPS/IMU EO data.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.453-454
• /
• 2003

Most research materials (data), which are used for the study of digital mapping and digital elevation model (DEM) in the field of Remote Sensing and Aerial Photogrammetry are aerial photographs and satellite images. Additionally, they are also used for National land mapping, National land management, environment management, military purposes, resource exploration and Earth surface analysis etc. Although aerial photographs have high resolution, the data, which they contain, are not used for environment exploration that requires continuous observation because of problems caused by its coastline, as well as single - spectral and long-term periodic image. In addition to this, they are difficult to interpret precisely because Satellite Images are influenced by atmospheric phenomena at the time of photographing, and have by far much lower resolution than existing aerial photographs, while they have a great practical usability because they are mulitispectral images. The PKNU 2 is an aerial photographing system that is made to compensate with the weak points of existing aerial photograph and satellite images. It is able to take pictures of very high resolution using a color digital camera with 6 million pixels and a color infrared camera, and can take perpendicular photographs because PKNU 2 system has equipment that makes the cameras stay level. Moreover, it is very cheap to take pictures by using super light aircraft as a platform. It has much higher resolution than exiting aerial photographs and satellite images because it flies at a low altitude about 800m. The PKNU 2 can obtain multispectral images of visible to near infrared band so that it is good to manage environment and to make a classified diagram of vegetation.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.251-252
• /
• 2010

Lately, airborne digital camera and airborne laser scanner in field of airborne surveying is used to build geography information such as DEM generation and terrain analysis. In this study, 3D position accuracy is compared medium format CCD camera RCD105 with high resolution airborne digital camera DMC. For this, test area was decided for aerial photograph and ground control points was selected in 1/1,000 scale digital map. In Result, Root Mean Square Error(RMSE) was analyzed between RCD105 and DMC after aerial triangulation.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.19 no.1
• /
• pp.80-93
• /
• 2016

Parcel boundary demarcation in agricultural area is commonly performed by terrestrial surveying methods, which have been pointed out as drawbacks to require consuming too much time and heavy expenditure. With the developments of high performance digital aerial cameras, however, studies on cadastral boundary demarcation with an aerial photogrammetric method attract a great attention in recent years. In this paper, an approach is presented to rapidly demarcate parcel boundaries coinciding with real ground ones in agricultural areas by extracting boundaries from the high resolution aerial orthoimages based on aerial targets. In order to investigate the feasibility of the proposed method, the accuracy of coordinates and area of parcel boundaries extracted from the aerial targets appeared in orthoimages compared with that of terrestrial boundary surveying results over the selected two test agricultural areas. Aerial image data were processed taken by a ADS80 digital camera with a GSD of 8cm in Changwon region, and by a DMCII camera with a GSD of 5cm in Suwon respectively. The result shows that the accuracy of parcel demarcation using aerial images is within the tolerance limits of coordinates and areas compared with that of terrestrial surveying. The proposed method using aerial target-based high resolution aerial images is therefore expected to be usefully applied in the agricultural parcel demarcation.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.33 no.1
• /
• pp.11-21
• /
• 2015

An Ortho-image is the production of removed geometrical displacement, which is generated the aerial image distortion and the relief displacement, etc., using the DSM (Digital Surface Model). Accordingly, the resolution of raw image and the accuracy of DSM will has significant impacts on the ortho-image accuracy. Since the latest DMCII250 aerial camera delivers the high resolution images with five centimeters Ground Sampling Distance(GSD), it expects to generate the high density point clouds and the high quality ortho-images. Therefore, this research has planned for reviewing the potentiality and accuracy of high quality ortho-image production. Following to proceed the research, DSM has been produced through the high density point cloud extracted from DMCII250 aerial image to supply of high density DSM by creation of ortho-image. The research results has been identified that images with the DSM brought out higher degrees in positional accuracy and quality of ortho-image, compared with the ortho-image, produced from the existing digital terrain map or DSM data.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.35 no.1
• /
• pp.1-10
• /
• 2017

An UAV (Unmanned Aerial Vehicle) is a flight system that is designed to conduct missions without a pilot. Compared to traditional airborne-based photogrammetry, UAV-based photogrammetry is inexpensive and can obtain high-spatial resolution data quickly. In this study, we aimed to classify the land cover using high-spatial resolution images obtained using a UAV. An RGB camera was used to obtain high-spatial resolution orthoimage. For accurate classification, multispectral image about same areas were obtained using a multispectral sensor. A DSM (Digital Surface Model) and a modified NDVI (Normalized Difference Vegetation Index) were generated using images obtained using the RGB camera and multispectral sensor. Pixel-based classification was performed for twelve classes by using the RF (Random Forest) method. The classification accuracy was evaluated based on the error matrix, and it was confirmed that the proposed method effectively classified the area compared to supervised classification using only the RGB image.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.2
• /
• pp.141-147
• /
• 2011

This study analyzed the issues and its usefulness of drawing small-scale digital map by using the large-scale digital map which was producted with high-resolution digital aerial photograph which are commonly photographed in recent years. To this end, correlation analysis of the feature categories on the digital map was conducted, and this map was processed by inputting data, organizing, deleting, editing, and supervising feature categories according to the generalization process. As a result, 18 unnecessary feature codes were deleted, and the accuracy of 1/5,000 for the digital map was met. Although the size of the data and the number of feature categories increased, this was proven to be shown due to the excellent description of the digital aerial photograph. Accordingly, it was shown that drawing a small-scale digital map with the large-scale digital map by digital aerial photograph provided excellent description and high-quality information for digital map.

• Journal of Korean Society for Geospatial Information Science
• /
• v.15 no.4
• /
• pp.31-39
• /
• 2007

As the availability of images from airborne digital camera with high resolution is expanded, a lot of concern are shown about the production of orthoimage and digital map. This study presents the method of updating digital map using orthoimage from airborne digital camera image. Images were georectified using GPS surveying data. For the generation of orthoimage, Lidar DEM was used. The absolute positional accuracy of orthoimage was evaluated using GPS surveying data. And that of the building layer of digital map was estimated using the existed digital map at the scale of 1:1,000. The absolute positional accuracy of orthoimage was as followed: RMSE in X and Y were ${\pm}0.076m$ and ${\pm}0.294m$. The RMSE of the building layer were ${\pm}0.250m$ and ${\pm}0.210m$ in X and Y directions, respectively. The RMSE of the digital map using orthoimage from Aerial Digital Camera image fell within allowable error range established by NGII. Consequently, updating digital map using orthoimage from Aerial Digital Camera image can be applied to various fields including the construction of the framework data and the GIS of local government.

• Journal of Korean Society for Geospatial Information Science
• /
• v.24 no.1
• /
• pp.61-68
• /
• 2016

Digital aerial images have been commonly used in a large scale map production owing to their excellent geometry, and high spatial and radiometric resolution in recent years. However, a quality verification process for acquired images should be preceded in order to secure the high precision and reliability of produced results. Several experimental studies to verify digital imaging systems have been vigorously researched by constructing permanent test field in abroad. On the other hand, it is urgently necessary to suggest a practical scheme for an image quality verification, because this related study and experiment are still in its early stage at home. Hence, this study aims to present an easy method to measure the spatial resolution of the image in a visual way using a portable Siemens star. The images used in the study were obtained with three different cameras, two frame array sensors of DMC, UltraCamXp and a linear array sensor of ADS80. The Siemens star target appeared in every image is extracted and then the spatial resolution of image is compared with theoretical GSD(Ground Sample Distance) by a visual method. In addition, the change of spatial resolution depending on the location of the Siemens star from image center and flight direction and cross-flight direction is also compared and analyzed. As study results, while the theoretical GSDs of images taken with each camera are about 6~9cm, the visual resolutions are 1.2~1.3 times as great as the theoretical ones.

• Journal of Korean Society for Geospatial Information Science
• /
• v.6 no.2 s.12
• /
• pp.11-20
• /
• 1998

Although aerial photogrammetry has been used to generate or update digital maps. It is difficult to make the spatial and attribute data for all kinds of objects on the ground with only aerial photogrammetry. Therefore, we are getting informations of the object on the ground through an on-the-spot survey In order to improve accuracy and reliability of on-the-spot survey in this study, we obtained stereo images from high resolution digital camera (1152*864 pixels) and developed the video photogrammetry which was able to determine the three dimensional coordinates from stereo images by applying DLT(Direct Linear Transformation). Also, the developed video photogrammetry could generate and update the spatial and attribute data in digital maps by using a function that could connect three dimensional coordinates with the attribute data.