• 제목/요약/키워드: High quality dry

검색결과 805건 처리시간 0.028초

PDP용 무연 투명유전체의 Dry Film 개발 (Development of Dry Films of Lead-free Transparent Dielectrics for PDP)

  • 이지훈;방재철
    • 한국산학기술학회논문지
    • /
    • 제6권6호
    • /
    • pp.497-501
    • /
    • 2005
  • Dry film 공정에 의해 PDP(Plasma Display Panel)용 무연 투명유전체를 제조하였다. 여러 슬러리 조성으로부터 고밀도 green sheet를 제조하는데 최적의 조성을 선정하였다. 한편, 슬러리는 양질의 green sheet를 제작하는데 적합한 shear thinning 특성을 나타냈다. 제조한 투명유전체의 열팽창계수는 유리기판인 PD-200과 유사한 $97{\times}10^{-7}/^{\circ}C$로 측정되었다. PD-200에 접합된 투명유전체의 단면 주사현미경 관찰로부터 두 층은 갭이 없이 매우 견실히 접합되어 있음을 확인할 수 있었다.

  • PDF

차음성능이 향상된 경량벽체 개발 및 성능평가 연구 (A Study on the Development of Lightweight Wall for Sound Transmission Loss and Field Test Results of the Dry-Wall System)

  • 이병권;배상환;홍천화
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2004년도 춘계학술대회논문집
    • /
    • pp.699-704
    • /
    • 2004
  • As being inconvenient to apply reinforced concrete structure to high-rise buildings, it is applied steel structured system. Therefore light-weight wall systems are applied as partition wall to reduce the self-load of the building. But, the required performances of a light-weight wall are not evaluated systematically. As a field survey result, partition walls of house-to-house were not showed their respected performances, so the dwellers are feel so worse the quality of the whole building. In steel-structured high-rise buildings especially, occupant's dissatisfaction concerned indoor noise was high because curtain wall systems having a high air-tight performance isolate the outdoor noise making masking effect. Therefore wall systems which have high performances of sound insulation and air-tightness are required in high-rise buildings. As a result, a new drywall system was presented and the performance was verified with field test.

  • PDF

Response Surface Methodology를 이용한 숭어(Mugil cephalus) 반염건품의 개발 (Development of Salted Semi-dried Common Gray Mullet Mugil cephalus using Response Surface Methodology)

  • 박권현;허민수;김진수
    • 한국수산과학회지
    • /
    • 제48권6호
    • /
    • pp.839-848
    • /
    • 2015
  • This study examined the optimal salting drying method and processing conditions (salt concentration, curing time, dry temperature, and drying time) for preparing salted semi-dried common gray mullet (SSD-CGM) Mugil cephalus based on the moisture content, salinity, and overall acceptance using response surface methodology (RSM). The moisture content, salinity, and overall acceptance of SSD-CGM prepared with different salting methods revealed that dry salting was the optimal salting method for preparing high-quality SSD-CGM. The optimal drying method for preparing high-quality SSD-CGM based on the drying velocity and sensory color was hot air-blast drying. The results of the RSM program indicated that the optimal independent variables ($X_1$, salt concentration; $X_2$, curing time; $X_3$, dry temperature; $X_4$, drying time) based on the dependent variables ($Y_1$, moisture content; $Y_2$, salinity; $Y_3$, overall acceptance) for high-quality SSD-CGM were 5.6% for $X_1$, 2.7 h for $X_2$, $47.0^{\circ}C$ for $X_3$, and 8.5 h for $X_4$ for uncoded values. The predicted values of $Y_1$, $Y_2$, and $Y_3$ for SSD-CGM prepared under optimal conditions were 54.4%, 4.2%, and 6.3, respectively, while the experimental values were $55.2{\pm}1.0%$, $4.1{\pm}0.3%$ and $6.7{\pm}0.8$. The actual and predicted values did not differ.

와어어 인발용 건식 윤활제의 재생기술 개발 및 평가 (Development and Evaluation of Dry Lubricant Recycle Technologies for Wire Drawing Process)

  • 김선호;장규철
    • 한국기계가공학회지
    • /
    • 제13권2호
    • /
    • pp.35-40
    • /
    • 2014
  • Wire drawing is aplastic deformation process that produces a wire with a desired diameter by pulling the end of the wire through a die. During the cold wire drawing process, the temperature between the wire and the die bearing is increased. This temperature increase causesenergy consumption increase, bad wire quality, and decreased die life. To reduce friction and avoid high temperature between the wire and the die in the cold wire drawing process, a dry lubricant with soap particles is used. It is not possible to reused the lubricant onceiron oxide is attached to the soap particlesat high pressure die. In this study, recycling technologies for wasted soap particles with processes of crushing, separation, and screening are developed. From the evaluation, the recycling efficiency was found to be 86.97%.

다공질 물질의 냉각현상 연구를 통한 코크스냉각공정의 모델링 (Modeling for a Coke Dry Quenching Process Using a Theory of a Porous Material)

  • 김주한;이용주;김기석
    • 한국생산제조학회지
    • /
    • 제21권5호
    • /
    • pp.697-701
    • /
    • 2012
  • Numerical modeling for a coke dry quenching process was developed and evaluated. The cokes had similar characteristics to a porous material, therefore, its quenching analysis was simplified as a cooling process of porous blocks. A uniform inlet temperature and constant properties of materials in the oven were also assumed. With given operating conditions, temperature profiles in the cokes were calculated and compared to the actual values. The calculated temperature gradient was high at the upper part of the coke flow and the cooling rate decreased as cokes came down to the exit port. The exit port temperature of cokes was similar to the measured value, however, temperature-dependent material properties and operating conditions must be considered to predict the temperature precisely. The calculated results could be applied to design a coke oven to produce high quality cokes.

관개용 저수지 수질개선을 위한 접촉산화수로 (Channels Packed with Porous Media to Improve Water Quality for Irrigation Reservoirs)

  • 박병흔;장정렬;김영경;이광식;권순국
    • 한국환경농학회지
    • /
    • 제19권2호
    • /
    • pp.122-127
    • /
    • 2000
  • A stream purification system was applied to the upper reaches of the Masan Reservoir to improve the water quality. This system consisted of two channels which were constructed on both sides of the stream, one side packed with crushed gravels and the other with plastic filter media. The system operated under low pollutant concentrations and high hydraulic loadings during a dry season to avoid clogging of the filter media. Removal rate and efficiency of chemical oxygen demand (COD) in the channel packed with crushed gravel were $14.8g/m^3/d$ and 11.5%, and for the channel with plastic filter media, $50.1g/m^3/d$ and 13.5%, respectively. Removal efficiencies of total phosphorus (T-P) were 6.6% (gravel) and 10.0% (plastic media). These results indicated plastic filter media having relatively high specific surface areas were more efficient than crushed gravels in removing pollutants. However, due to low influent water quality during dry season, the removal efficiencies were low. The proportion of nitrate nitrogen to total nitrogen (T-N) of the inflow was high but, as the system operated under aerobic condition, nitrate nitrogen could not denitrified. Accordingly, total nitrogen was not attenuated with this system. To improve the reservoir water quality effectively, this system should be able to treat the storm runoff containing higher pollutant loadings. When the filter materials are clogged by the storm runoff instead of backwashing, it would be more efficient to replace them, Therefore, the use of natural materials which are light, easily obtaining and replaceable, and have high specific surface areas is recommended.

  • PDF

연X선 및 요드반응에 의한 수삼의 품질평가 (Quality Evaluation of Fresh ginseng by Soft X-ray and iodine Test.)

  • 박훈;조병구;이미경
    • Journal of Ginseng Research
    • /
    • 제8권2호
    • /
    • pp.167-171
    • /
    • 1984
  • Soft X-ray is useful to identify the quality of fresh ginseng causing the inside cavity or white pan of red ginseng. The portion of low mass density identified by the difference in absorption of soft X-ray showed lower dry matter density and less or no response to iodine test indicating less accumulation or excess consumption of starch. The inside white part of red ginseng absorbed less X-ray than the normal part did. Probability for identification of the inside cavity or white at fresh ginseng was rather high (80-90%) in screen observation than f'3m reading and seemed to be increased further by using the developed screen and with training. The inside white of red ginseng appeared to be due to starch deficiency. Dry matter density appeared to be better than fresh weight density for the quality criterion.

  • PDF

골풀 묘상 시비량이 건경 수량과 품질에 미치는 영향 (Effects of Fertilizer Level in Nursery on Dry Stem Yield and Quality of Mat Rush (Juncus effusus L. var. decipiens Buchenan))

  • 신동영;정동수;현규환;서영남;임준택;권병선
    • 한국자원식물학회지
    • /
    • 제20권4호
    • /
    • pp.309-311
    • /
    • 2007
  • 남부지방에서 답리작으로 휴경답의 제고를 위하여 골풀의 시비량을 구명코자 시험하였던바 묘상에서의 시비량은 $N-P_{2}O_{5}-K_{2}O=60-30-60kg/10a$의 양으로 육성한 묘들은 본답에 가서도 수량 및 수량구성요소가 우수하였다. 따라서 골풀의 묘상 시비량은 $N-P_{2}O_{5}-K_{2}O=60-30-60kg/10a$ 이여야 된다고 생각된다.

수확시기 및 첨가제가 연맥 사일리지의 품질에 미치는 영향 (Effects of Harvesting Date and Additives on the Quality of Fall Sown Oat ( Avena sativa L. ) Silage)

  • 이성철
    • 한국초지조사료학회지
    • /
    • 제18권2호
    • /
    • pp.157-162
    • /
    • 1998
  • This experiment was carried out to investigate the effects of harvesting date and additives on the quality of fall sown oat(Avena sativa L.) silage at the department of animal resources science, college of life resources science, Woosuk University, Wanju &om August, 1997 to March, 1998. The experiment was arranged in a split plot design with three replications. The main plots consisted of the harvesting date such as 15 Oct., 23 Oct. and 2 Nov. and different additives as subplots(control, wheat bran, formic acid, lactic acid bacteria, and wilting). The results otained are summarized as follow : The fiesh and dry matter yield of oat were increased by harvesting date delayed, then fiesh and dry matter yield at 2 Nov. were highest as 36,733 and 7,29Okg/ha, respectively. The dry matter content of oat silage was increased significantly by harvesting date delayed(P< 0.05), and DM content of wheat bran and wilting treatment was high at every harvest date. The DM loss was lower in LAB, formic acid and wheat bran treatment, but on significant difference was found among harvesting date(P< 0.05). Average pH of silage harvested at 23 Oct. was lowest as 4.06, and the quality(CP, NDF, ADF, and IVMDM) of oat silage was decreased by harvesting date delayed. The content of acetic acid was no difference among harvesting date, but butyric acid was decreased and lactic acid was increased at 23 Oct. harvest. The result of this study indicate that oat harvested at booting-heading stage of maturity with wilting wheat bran, and LAB could be recommended as producing high quality of oat silage.

  • PDF

Development of dry milling suitable rice cultivar to invigorate rice processing products

  • Jeung, Ji-Ung
    • 한국작물학회:학술대회논문집
    • /
    • 한국작물학회 2017년도 9th Asian Crop Science Association conference
    • /
    • pp.10-10
    • /
    • 2017
  • Rice consumption has been continuously decreasing as the eating habits of Koreans have become westernized and diversified. The per capita annual rice consumption in Korea has dropped sharply from 136.4 kg in 1970 to 61.9 kg in 2016. The Korean government, therefore, has been trying to promote rice consumption by invigorating the processed food industry using rice flour. To facilitate the market for processed rice foods, it is essential to develop proper milling technology in terms of flour particle size and damaged starch content to produce high quality rice flour at competitive cost. Dry milling and wet milling are the two major processes used to produce rice flour. Although the dry milling process is relatively simple with a lower production cost, damaged starch content increases because of the high grain hardness of rice. In wet milling, the quality of rice flour is improved by reducing flour particle size as well as damaged starch content through soaking procedures. However, the production costs are high because of the additional expenses associated with the disposal of waste water, sterilization and drying of the wet flour. Recently developed technologies such as jet milling and cryogenic milling also require expensive investment and production. Therefore, developing new rice cultivars with dry milling adaptability as well as good processing properties is an important goal of rice breeding in Korea. 'Suweon 542' is a floury endosperm mutant line derived from sodium azide treatment on a high-yield, early maturing, and non-glutinous japonica rice cultivar, 'Namil'. Compared with the wild type, after dry milling process, the grain hardness of 'Suweon 542' was significantly lower because of its round and loosely packed starch granules. Also, the flour of 'Suweon 542' had significantly smaller particles and less damaged starch than 'Namil' and other rice cultivars and its particle size distribution was similar to a commercial wheat cultivar. Recently, through collaborations with nine universities and food companies, a total of 21 kinds of processed prototypes, using the dry milling flour of 'Suweon 542', were evaluated. In the production of major rice processing products, there was no significant quality difference between the flours prepared by wet milling and dry milling. Although the amount of water added to the dough was slightly increased, it was confirmed that the recipe applying the wet flour could be used without significant change. To efficiently transfer the floury endosperm characteristics of 'Suweon 542' to other commercial rice cultivars, it is essential to develop DNA marker tightly linked to the target gene. Association analysis using 70 genome-wide SSR markers and 94 F2 plants derived from 'Suweon 542'/'Milyang 23' showed that markers on chromosome 5 explained a large portion of the variation in floury grains percentage (FGP). Further analysis with an increased number of SSR markers revealed that the floury endosperm of 'Suweon 542' was directed by a major recessive locus, flo7(t), located in the 19.33-19.86 Mbp region of chromosome 5, with RM18639 explaining 92.2% of FGP variation in the F2 population. Through further physical mapping, a co-segregate and co-dominant DNA marker with the locus, flo7(t) was successfully developed, by which, thereby, breeding efficiency of rice cultivars having proper dry milling adaptability with high yield potential or useful functional materials would be improved. 'Suweon 542' maintained the early maturity of the wild type, Namil, which can be used in rice-wheat double cropping systems in Korea not only for improved arable land but also for sharing flour production facilities. In addition to the high susceptibility against major rice diseases, nevertheless, another possible drawback of 'Suweon 542' is the high rate of viviparous under prolonged rainfall during the harvesting season. To overcome susceptibility and vivipary of 'Suweon 542', the progeny lines, derived from the crosses 'Suweon 542' and 'Jopyeong', an early maturing rice cultivar with multiple resistance against rice blast, bacterial blight, and rice strip virus, and 'Heugjinju', a anthocyanin pigment containing black rice cultivar, were intensively evaluated. As the outputs, three dry milling suitable rice elite lines, 'Jeonju614', 'Jeonju615', and 'Jeonju616' were developed.

  • PDF