• Nuclear Engineering and Technology
• /
• v.52 no.7
• /
• pp.1380-1385
• /
• 2020

An annular linear induction electromagnetic pump (ALIP) which has a developed pressure of 0.76 bar and a flow rate of 100 L/min is designed to analysis end effect which is main problem to use ALIP in thermohydraulic system of the prototype generation-IV sodium-cooled fast reactor (PGSFR). Because there is no moving part which is directly in contact with the liquid, such as the impeller of a mechanical pump, an ALIP is one of the best options for transporting sodium, considering the high temperature and reactivity of liquid sodium. For the analysis of an ALIP, some of the most important characteristics are the electromagnetic properties such as the magnetic field, current density, and the Lorentz force. These electromagnetic properties not only affect the performance of an ALIP, but they additionally influence the end effect. The end effect is caused by distortion to the electromagnetic field at both ends of an ALIP, influencing both the flow stability and developed pressure. The electromagnetic field distribution in an ALIP is analyzed in this study by solving Maxwell's equations and using numerical analysis.

• The Korean Journal of Physiology
• /
• v.23 no.2
• /
• pp.253-261
• /
• 1989

Responses of atrial natriuretic peptide (ANP), aldosterone and renin release to acute volume expansion were compared in normotensive Wistar and spontaneously hypertensive rat (SHR) fed low or high-sodium diet (2 or 25 mmol Na/100 g diet). Experimental diets were fed for 6 weeks from 7-week-old and the growth rate was similar in all groups. In the morning of the experiment, catheters were inserted under ether anesthesia in femoral artery for pressure recording and blood collection, femoral vein for saline infusion, and bladder for urine collection. Then, the rats were placed in restraining cages. When the rats were recovered from anesthesia and the arterial pressure became stabilized, control urine and blood samples were collected. Then, 0.9% saline was infused for 30 min for volume expansion (3% BW). Arterial pressure was significantly higher in the high-sodium SHR but there was no difference between the two groups of Wistar rats. Control plasma levels of Na, K, ANP, renin activity, and hematocrit were not different among the 4 groups. However, plasma aldosterone level was significantly higher in the low-sodium groups. Wistar low-sodium rats showed approximately two times higher plasma aldosterone level than the SHR counterpart. Volume expansion produced a marked increase in plasma ANP level, especially in the high-sodium groups. The low-sodium groups of both strains showed approximately two-fold increase in plasma ANP level. Following a volume expansion plasma aldosterone level and renin activity decreased in all groups. There was a significant logarithmic positive correlation between plasma renin activity and aldosterone concentration. The low-sodium rats produced a greater increase in aldosterone release by small increase in plasma renin than did the high-sodium rats. The low- and high-sodium rats produced a similar degree of diuresis and natriuresis after volume expansion. However, SHR produced a greater natriuresis than did the Wistar rats. The above results indicate that regulatory mechanisms of ANP, aldosterone and renin release are different between the normotensive and hypertensive rats, and between the low- and high-sodium groups.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.23 no.5
• /
• pp.315-323
• /
• 2021

Tunnel is the most energy-consuming structure in road due to the characteristic of using artificial lighting during day and night. Therefore, tunnel lights are being replaced by LED lamp that have advantages with respect to low power consumption. The best use of social overhead capital can be expected by considering the life cycle cost, because to tunnel structures are accompanied by a series of medium-to-long-term and continuous processes of replacing auxiliary facilities. In this study, the saving effect by LCC analysis was quantitatively analyzed by replacing tunnel light sources from high-pressure sodium lamps to LED lamps. The effect of reducing the replacement cycle by increasing the life of the lamps and the resulting maintenance cost is very significant, on replacing tunnel lighting light sources with LED lamp.

• The Korean Journal of Physiology
• /
• v.24 no.2
• /
• pp.319-329
• /
• 1990

Effects of atrial natriuretic peptide (ANP) on blood pressure, plasma lenin activity, aldosterone and renal excretion were compared in conscious spontaneously hypertensive rats (SHR) and normotensive Wistar rats fed low, medium or high sodium diet (2, 10, 25 mmol NaCl/100g diet) for 6 weeks. ANP infusion (380 ng/kg/min for 20 min) produced reductions in blood pressure, plasma renin activity, and aldosterone level, but marked increases in hematocrit, urine flow, and excretions of sodium and potassium. The low sodium group showed a significantly enhanced aldosterone lowering effect of ANP than the high sodium group. However, three salt groups showed no difference in effects of ANP on blood pressure, plasma renin activity, hematocrit and diuresis. Natriuretic response to ANP was significantly greater in the high salt-than in the low sait-SHR, but was not different between the Wistar salt groups. There were strain differences in effects of ANP: SHR showed greater responses of blood pressure and natriuresis than Wistar rats. Above results indicate that aldosterone-lowering and natriuretic effects of ANP were modifed by different dietary sodium intakes. However, blood pressure- and renin-lowering, or diuretic effects of ANP were not affected by dietary sodium intakes. The mechanisms whereby dietary sodium intakes alter the effects of ANP in the pathogenesis of hypertension are not clear.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.4
• /
• pp.8-14
• /
• 2004

In this paper, We designed the electronic ballast power factor corrected(PFC) circuity for an 400[W] hight pressure soldium lamp using boost-converter. The values of PFC elements in the proposed boost-converter circuit are calculated theoretically and performed simulation using IsSPICE. We also implemented the ballast for high pressure sodium lamp and experiments. We found that the experimental characteristics of implemented PFC circuit were same with those of simulation results. The experimental results show the performance as PF 90.3[%] at output 400(W).

• Journal of Nutrition and Health
• /
• v.16 no.3
• /
• pp.209-215
• /
• 1983

In high sodium societies, the incidence in blood pressure with childhood growth is more abrupt than the rate of rise in low sodium populations. Thus, it appears that a lower level of dietary sodium intake is required to correct established hypertension and to prevent its appearance In present work, an investigation was made to estimate the correlation between urinary sodium, potassium and creatinine excretion, weight, height, upper arm circumference, blood pressures and the number of heart rate. Sixty- four children aged 12-16 years (41 boys and 23 girls) were measured. Twenty -four-hour urinary sodium and potassium excretion averaged 132.8 mEq and 42.1 mEq in boys, 126.4 mEq and 41.3 mEq in girls. Twenty- four -hour urinary creatinine excretion averaged 795.7 mg and 744.3mg in boys and girls, respectively. Systolic and diastolic blood pressure were 117.6mmHg and 49.7mmHg in boys, 95.5mmHg and 58.2mmHg in girls. Systolic blood pressure correlated positively weight, height and urinary creatinine but diastolic blood pressure correlated positively with upper arm circumference and negatively with urinary potassium. It was concluded that urinary sodium does not explain the blood pressure.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.12 no.1
• /
• pp.93-100
• /
• 2016

Since the sodium-cooled fast reactor is operated in a hostile environment due to the use of liquid sodium as its coolant, advanced techniques for in-service inspection are required to periodically verify the integrity of the reactor. This paper presents the development of in-service inspection techniques for Proto-type Generation IV Sodium-cooled Fast Reactor. First, the 10 m long plate-type ultrasonic waveguide sensor has been developed for in-service inspection of reactor internals, and its feasibility was verified through several under-water and under-sodium experiments. Second, the combined inspection system for in-service inspection of ferromagnetic steam generator tubes has been developed. The remote field eddy current testing and magnetic flux leakage testing can be conducted simultaneously by using the developed inspection system, and the detectability was demonstrated through several damage detection experiments. Finally, the electro-magnetic acoustic transducer which can withstand high temperature and be installable in the remote operated vehicle has been developed for in-service inspection of the reactor vessel, and its detectability was investigated through damage detection experiments.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.11
• /
• pp.1658-1664
• /
• 2006

The objective of this study was to investigate the effects of sodium alginate (SA) and pressurization levels on pH, water-binding and textural properties of pork muscle gels (PMG) containing salt. Ground lean pork with 1.0% NaCl and a given amount of SA (0.25, 0.5, 0.75 and 1.0%, respectively), was pressurized to 100, 200 or 300 MPa and subsequently gelled by heating. Results showed that addition of SA into pork muscle enhanced water-holding capacity (WHC) of PMG (p<0.05) as SA increased from 0.25% to 1.0%, with pH slightly increased (p>0.05). A decrease (p<0.05) was observed in all textural parameters (hardness, cohesiveness, springiness and chewiness). Pressurization had no effect on the tendency of WHC to increase or the decrease of the textural parameters. However, the effectiveness of pressurization to enhance textural properties of PMG was significant at some SA levels, especially ${\geq}200MPa$ and at ${\leq}0.75%$ SA levels. Different combinations of pressure and SA levels could bring about variation in textural properties of PMG while SA enhanced WHC of pork muscle. The multiformity of the texture will open up a wide range of technological possibilities for the manufacture of pork-based restructured low-fat products.

• Nuclear Engineering and Technology
• /
• v.54 no.12
• /
• pp.4412-4421
• /
• 2022

The pressure measurement in the high-temperature liquid metal system, such as Sodium-cooled Fast Reactor(SFR), is important and yet it is very challenging due to its nature. The measuring pressure is relatively at low range and the applied temperature varies in wide range. Moreover, the pressure transfer material in impulse line needs to considered the high temperature condition. The conventional diaphragm-based approach cannot be used for it is impossible to remove the effect of thermal expansion. In this paper, the Fiber Bragg Grating(FBG) sensor-based pressure measuring concept is suggested that it is free of problems induced by the thermal expansion. To verify this concept, a prototype was fabricated and tested in an appropriate conditions. The uncertainty analysis result of the experiment is also included. The final result of this study clearly showed that the FBG-based pressure transmitter system is applicable to the extreme environment, such as SFR and any other high-temperature liquid metal system and the measurement uncertainty is within reasonable range.

• Membrane Journal
• /
• v.12 no.3
• /
• pp.182-191
• /
• 2002

Polyamide reverse osmosis (RO) membrane with thin film composite structure was commercialized for seawater desalination process. Recently, it has been reported that some RO processes for high pressure and recovery leads to reducing in energy cost and pretreatment scale compared with earlier process. The development of energy recovery, pumping device and RO elements with high pressure and rejection made high pressure and recovery process possible. In this study, permeation properties of commercialized seawater RO membrane were investigated under the condition of high pressure and recovery. In the RO sheet membrane test 3.5% NaCl of synthetic seawater was used. The synthetic seawater contained only sodium chloride. In the RO module test, natural seawater was used at Happo Bay, Masan city. As the results, RO membrane with high durability of pressure was better than that with high rejection of seawater for high pressure and recovery process. Seawater rejection of high concentrate tends to be improved by high pressure operation.