• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.04a
• /
• pp.342-350
• /
• 2009

Fuel cells convert a fuel together with oxygen in a highly efficient electrochemical reaction to electricity and water. Since the electrochemical reaction in the fuel cell stack dose not generate any noise, Fuel cell systems are expected to operated much quieter than combustion engines. However, the tonal noise and the broad band noise caused by a centrifugal compressor and an electric motor cause which is required to feed the ambient air to the cathode of the fuel cell stack with high pressure. In this study, the multi-camber perforated muffler is used to reduce noise. We propose optimized muffler model using an axiomatic design method that optimizes the parameters of perforated muffler while keeping the volume of muffler minimized.

• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.535-540
• /
• 2000

The objective of the present study is to visualize the pulsatile flow fields by using three-dimensional computer simulation and the PIV system. A closed flow loop system was built for the steady and unsteady experiments. The Harvard pulsatile pump was used to generate the pulsatile pressure and velocity waveforms. Conifer powder as the tracing particles was added to water to visualize the flow field. Two consecutive particle images were captured by a CCD camera for the image processing. The cross-correlation method in combination with the moving searching area algorithm was applied for the image processing of the flow visualization. The pulsatile flow fields were visualized effectively by the PIV system in conjunction with the applied algorithm. The range validation and the area interpolation methods were used to obtain the final velocity vectors with high accuracy. The finite volume predictions were used to analyze three-dimensional flow patterns in the bifurcation model. The results of the PIV experiment and the computer simulation are in good agreement and the results show the recirculation zones and formation of the paired secondary flow distal to the apex of the bifurcated model. The results also show that the branch flow is pushed strongly to the inner wall due to the inertial force effect and helical motions are generated as the flow proceeds toward the outer wall.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.10a
• /
• pp.51-70
• /
• 2003

In recent years, Korean rice must compete with the rice of advanced countries under Doha Development Agenda(DDA) and free Trade Agreement(FTA). Therefore we should find more active and positive solution in rice industry according to the inncreasing power of international pressure. Increasing rice production was the most important policy during the past food-deficient days, but recently, with overproduction of rice, various circulation system by the brand(price)-differentiation should be settled in a recent market of Korea. Nowadays, some advanced rice farmers and Rice Processing Complex(RPC) managers developed new brands of rice with high-quality, adding healthy materials and environment-friendly farming methods. Therefore, the future strategy of making a new brand rice should be planned including selection of rice variety, cultural and post-harvest techniques, circulation and processing methods to compete against foreign rice. And environment-friendly farming is also recommendable for food safety and differentiate from imported rice. For the purpose of successful brand-rice, the following points might be considered. Firstly, selection of good quality rice and continual development of good variety must be conducted for the differentiation of Korean rice from foreign rice. Secondly, a special contract between producer and consumer with functional-rice, organic filming-rice, specific-rice will be recommendable. Thirdly, improvement of post-harvest management and milling system are necessary for the production of differentiated-rice. Fortunately, standard of inspection, rules of description for brand-rice must be developed by a more scientific examination in order to settlement of trust for consumer. Finally, provincial or regional-representative brand rice must be settled and conducted for the development of agreement market system between producer and consumer.

• Journal of the Korean Ceramic Society
• /
• v.43 no.12 s.295
• /
• pp.852-858
• /
• 2006

It is well known that $BaMgAl_{10}O_{17}:Eu^{2+}$ (BAM) and $CaMgSi_2O_6:Eu^{2+}$ (CMS) are a highly efficient blue phosphor. However, these phosphors in the form of thin films have not yet been realized clue to technical difficulties. We prepared thin film type BAM and CMS phosphors on quartz glass substrate using a pulsed laser deposition technique. The luminescent and structural properties of thin film phosphors were monitored as a function of key processing parameters such as oxygen partial pressure inside the deposition chamber, deposition time, laser energy density and the type of post-deposition treatments used. Even though we could not obtain single homogenous phases, thin films with large homogenous areas and a high photoluminescence could be produced by optimizing these processing parameters.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.12
• /
• pp.2300-2307
• /
• 2008

This study receives the noise transmitted in a constant audio frequency range through a microphone array in which the noise(like grease in a pan) occurs on the power supply line due to the troublesome partial discharge(arc). Then by going through a series of signal processing of removing noise, this study measures the distance and direction up to the noise caused by the troublesome partial discharge(arc) and monitors the result by displaying in the analog and digital method. After these, it determines the state of each size and judges the distance and direction of problematic part. When the signal sound transmitted by the signal source of bad insulator is received on each microphone, the signal comes only in the frequency range of 20 kHz by passing through the circuit of amplification and 6th low pass filter. Then, this signal is entered in a digital value of digital signal processing(TMS320F2812) through the 16-bit A/D conversion. By doing so, the sound distance, direction and coordinate of bad insulator can be detected by realizing the correlation method of detecting the arriving time difference occurring on each microphone and the algorithm of detecting maximum time difference.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.18 no.6
• /
• pp.697-701
• /
• 2009

A simple method for the fabrication of porous nano-master for the anti-reflection effect on the transparent substrates is presented. In the conventional fabrication methods for antireflective surface, coating method using materials with low refractive index has usually been used. However, it is required to have a high cost and long processing time for mass production. In this paper, we developed a porous nano-master with anti-reflective surface for the molding stamper of the injection mold, hot embossing and UV imprinting by using the aluminum anodizing process. Through two-step anodizing and etching processes, a porous nano-master with anti-reflective surface was fabricated at the large area. Pattern size Pore diameter and inter-pore distance are about 130nm and 200nm, respectively. In order to replicate anti-reflective structure, hot embossing process was performed by varying the processing parameters such as temperature, pressure and embossing time etc. Finally, antireflective surface can be successfully obtained after etching process to remove selectively silicon layer of AAO master.

• Transactions of Materials Processing
• /
• v.12 no.5
• /
• pp.498-503
• /
• 2003

The die for cold forging gets a very high axial load and radial pressure during processing and hence deforms considerably in the radial direction. This radial deformation of die becomes a important factor influencing the dimensional accuracy of a product. In order to obtain the product with highly accurate dimension, therefore, it is essential to acquire some information on elastic deformation of the die and the product. The study has been performed for the relation of the deformation between the die and the product in backward extrusion. The strain of the die has been given by the simple experiment using the strain gauges attached to the outer surface of the die. Also the history of the deformation of the die and the product has been given by the experiment and Lames' formula. The results has been compared with the previous another method. The study has given useful results for the deformation history of the die and the product through the experiment and Lame's formula in backward extrusion, which can be applied in the die design for the product with accurate dimension.

• International journal of advanced smart convergence
• /
• v.10 no.2
• /
• pp.151-157
• /
• 2021

Livestock farmers are using animal carcasses to dispose of the carcasses of livestock that have died of natural causes or disease. Most of the existing livestock carcass processors are mechanical in their structure without considering the environment. It has a function of sterilizing dead bodies at high pressure after processing them and causes environmental problems such as carbon monoxide emissions. If livestock carcasses occur, livestock farmers have to purchase their own livestock carcasses or entrust them to the outside world, which is costly. For this reason, the possibility of environmental pollution, infectious diseases, and spread has been increased recently by frequent dumping of dead bodies. The carcass of livestock mixed with manure not only serves as a medium for infectious diseases but also needsto be buried on a large scale as foot-and-mouth disease and avian influenza spread. As a result, the possibility of environmental pollution, such as contamination of groundwater, is increasing, so research is needed to protect and improve the environment. We aim to improve the process of processing livestock carcasses and purify the agricultural environment through development results on the form, structure and function of eco-friendly livestock carcasses. Its shape is applied with naturalshapessuch asstones and seeds. The material used in the dead body processis a brown beggar biocouple and is applied with an eco-friendly industrial animal recycling process. As a result of the study, it is expected to improve odors and the environment, and to be used as data to improve and help the livestock industry in the future.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2022.11a
• /
• pp.55-56
• /
• 2022

Hypertension is a severe health problem and increases the risk of other health issues, such as heart disease, heart attack, and stroke. In this research, we propose a machine learning-based prediction method for the risk of chronic hypertension. The proposed method consists of four main modules. In the first module, the linear interpolation method fills missing values of the integration of gas and meteorological datasets. In the second module, the OrdinalEncoder-based normalization is followed by the Decision tree algorithm to select important features. The prediction analysis module builds three models based on k-Nearest Neighbors, Decision Tree, and Random Forest to predict hypertension levels. Finally, the features used in the prediction model are explained by the DeepSHAP approach. The proposed method is evaluated by integrating the Korean meteorological agency dataset, natural gas leakage dataset, and Korean National Health and Nutrition Examination Survey dataset. The experimental results showed important global features for the hypertension of the entire population and local components for particular patients. Based on the local explanation results for a randomly selected 65-year-old male, the effect of hypertension increased from 0.694 to 1.249 when age increased by 0.37 and gas loss increased by 0.17. Therefore, it is concluded that gas loss is the cause of high blood pressure.

• Transactions of Materials Processing
• /
• v.33 no.3
• /
• pp.185-192
• /
• 2024

This study examined how varying tempering temperatures affect the susceptibility of Cr-Mo low alloy steels to hydrogen embrittlement. A slow strain-rate test (SSRT) was carried out on the steels electrochemically pre-charged with hydrogen in order to examine the hydrogen embrittlement behavior. The results showed that the hydrogen embrittlement resistance of the Cr-Mo low alloy steels improved with increasing tempering temperature. Thermal desorption analysis (TDA) revealed that diffusible hydrogen content decreased with increasing tempering temperature, accompanied by a slight increase in the peak temperature. This decrease in hydrogen content was likely due to a reduction in dislocation density which served as reversible hydrogen trap sites. These findings underline the significant role of tempering temperature in enhancing the hydrogen embrittlement resistance of Cr-Mo low alloy steels.