• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.611-614
• /
• 2005

It is well known that tire tread pattern has much influence on the tire pattern noise. The paper describes the method of pattern noise reduction by using the pitch sequence, both on the smooth asphalt roads and on the trenched concrete roads. The noise of tire is classified as either airborne or structure borne noise. Pattern noise through the airborne is considered as a major noise source at high speeds. As block impacting and air pumping by tread patterns are major noise source, tire pattern noise can be greatly influenced by optimal pitch sequence. The goal of this paper is to provide tire engineers with pitch sequence to reduce pattern noise effectively.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권9호
• /
• pp.565-571
• /
• 2000

SRM has been applied to many commercial applications that require economical advantages and high performance abilities. But it has some drawbacks such as acoustic noise due to the abrupt change of mmf level when commutation. The abrupt change of a phase excitation produces mechanical stresses and it results in torque ripple and noise. This paper deals with an analysis of vibration and noise in SRM drive. Several types of excitation method are taken into account. The 1-phase and 2-phase excitation technique of short-pitch winding 2-phase excitation technique of full-pitch winding are tested. The acoustic noise is reduced remarkably through the sequential phase excitation in the 2-phase excitation. It is because that the scheme reduces abrupt change of excitation level by distributed balanced excitation with free-wheeling during commutation.

• 대한기계학회논문집A
• /
• 제25권11호
• /
• pp.1720-1729
• /
• 2001

Wear characteristics of Nylon and acetal pinions against steel gears for different pitch line velocities was studied with a power circulating gear test rig under unlubricated condition. Specific wear rate was measured as a function of tooth number, module, tooth width and total revolution. The worn tooth surfaces were examined with a profile projector. The Nylon pinion showed lower specific wear rate than the acetal pinion. However, the Nylon pinion was fractured at high tooth loads, whereas the acetal pinion exhibited a steady wear behavior. The wear characteristics of Nylon pinion varied significantly with the Pitch line velocity. Wear occurred most severely at the tooth tip and the region immediately below the pitch line of pinion. The dominant wear mechanisms were adhesion and abrasion.

• The Journal of the Acoustical Society of Korea
• /
• 제27권1E호
• /
• pp.11-16
• /
• 2008

In this paper, a pitch cycle waveform (PCW) is extracted, quantized, and interpolated in a time domain to synthesize high-quality speech at low bit rates. The pre-alignment technique is proposed for the accurate and efficient PCW extraction, which predicts the current PCW position from the previous PCW position assuming that pitch periods evolve slowly. Since the pitch periods are different frame by frame, the original PCW is converted into the fixed-dimension PCW using the dimension-conversion method, and subsequently quantized by code-excited linear predictive (CELP) coding. The excitation signal for the linear predictive coding (LPC) synthesis filter is generated using the time-domain interpolation and interlink of the quantized PCW's. The coder operates at 4.2 kbit/s and 3.2 kbit/s depending on the pitch period. Informal listening test demonstrates the effectiveness of the proposed coding scheme.

• 한국통신학회논문지
• /
• 제18권2호
• /
• pp.270-278
• /
• 1993

본 논문에서는 고해상 피치검출을 이용해서 정확한 피치를 찾고 각 피치 주기에서의 상관함수와 문턱값을 비교하여 한국어 음성신호를 음소단위로 분리하는 알로리듬을 제안한다. 제안된 알고리듬의 특성은 정확하고 고신뢰도를 갖으며, 변이구간이나 무음구간도 구분할 수 있다. 이 알고리듬은 음소단위로 분리하여 코드북을 설계하는 백터양자화와 음성인식 분야에 적용된다. 본 논문에서 제안한 알고리듬은 PC386/DX 상에서 386/MATLAB으로 실행한 결과 피치주기를 정확히 찾고 음소별로 분리가 가능함을 알 수 있다.

• 소음진동
• /
• 제10권5호
• /
• pp.873-879
• /
• 2000

Experimental investigation was conducted to study the effects of pitch angle maximum camber on the performance and noise of an axial-flow fan used in outdoor-unit of air -conditioner. For this study the axial-flow fan whose pitch angle can be varied was made and the Specific sound Pressure Level and other coefficients were measured using the anechoic fan tester. It is found that pitch angle affects more severly than the maximum camber on the fan performance. On the while the maximum camber affects much on the specific sound power level. Present results show that it is important to choose the optimum pitch angle and maximum camber to design the high-performance and low-noise axial-flow fan and specific noise measured in the anechoic fan tester can be sued effectively for the design of low-noise fan.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1991년도 학술발표회 논문집
• /
• pp.45-49
• /
• 1991

In area of the speech synthesis, the waveform coding with high quality are mainly used to the synthesis by analysis. However, it is difficult to applying the waveform coding to the synthesis by rule, because the parameters of this coding are not classified as either excitation parameters and vocal tract parameters. In this paper, we proposed a new pitch change method that can alter the pitch periods in the waveform coding. The proposed method expands the pitch period by the LPC synthesis method, and then the period is compressed by the waveform halving technique. Thus, it is possible that the waveform coding is carried out the synthesis by rule in speech processing.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1996년도 추계 학술발표회
• /
• pp.117-123
• /
• 1996

Cabon fiber of general purpose was prepared from coal tar pitch modified with 10% benzoquinine(BQ) at 380C for 3 hours. Such a modified pitch raised the softening of the pitch from 85C to 271C at the yield of 40%. The modified pitch was spun smoothly at a rate of 480m/min into a fiber of 20um diameter. The fiber was stabilized stepwise at 236C (5C/min) and 312C (1C/min) for 3 hours each. Both carbonized and graphitized fibers exhibited tensile strength of 570MPa which appears large enough as a precursor for active carbon fiber. The activated carbon fiber prepared exhibited relatively high surface area of 2062m2/g at 76% burn-off and rather narrow distribution pore size of 20A.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.254-259
• /
• 1994

Recently, the precision ball screw becomes the essence of the high-precision industries and is playing a key role in the positioning devices. The standard and definition of pitch error in a precision ball screw is specified by KS, JIS or ISO. However, the method of measuring the pitch error is not concrete. In this study. laser measurement system(LMS) with a laser position transducer and a machine-tools is developed. In order to verify the stability of the LMS, several experiments with the standard ball screw is performed.

• 한국음향학회지
• /
• 제1권1호
• /
• pp.54-59
• /
• 1982

We present an improved 4800 bps LPC vocoder system that virtually eleminates the buzzy effect from synthetic speech. Excitation signal in the new system is formed by adding high-pass filtered pitch pulses or random noise to a baseband residual signal that has been coded by pitch predictive PCM. Since the baseband residual is used as a part of excitation, the system is also robust to V/UV and pitch errors. According to our informal listening tests, the synthetic speech of the new system does not have the buzzy effect. As a result the vocoder speech quality is more natural than that of a conventioinal LPC vocoder.