• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.356-359
• /
• 2007

Continuing improvements in integrated circuit chip density and functionality have mostly contributed toward a very large-scale integrated circuit(VLSI) and display device. In order to test (pass or fail) all of the high integrated semiconductor chip and display device, fine pitch probes are used. Fine pitch probes are manufactured by electroforming process of a Ni alloy in an electrolytic bath. In this paper, we expect that the electric field in bath with the Finite Element Method and applying the FEM result. So, we can obtained the probes that have high aspect ratio of 10 : 1

• Journal of the Korean Wood Science and Technology
• /
• 제15권2호
• /
• pp.53-66
• /
• 1987

Korean red pine (Pinus densiflora S. et. Z.) and pitch pine(Pinus rigida Mill) $5{\times}10cm$ dimension lumber were dried in a kiln providing a cross-circulation velocity of 5 m/sec at dry-and wet-bulb temperatures of 116 and $71^{\circ}C$, followed by 3 hours at 91 and $85^{\circ}C$. Compared to dimension lumber dried lumber were as follows. 1. To dry to 10 percent moisture content, the high-temperatures schedule of Korean red pine and pitch pine lumber took less than one seventh the time required by the conventional kiln drying schedule. 2. High-temperature drying rate and conventional drying rate to 10 percent moisture content of Korean red pine lumber were 2.75 and 0.35%/hr, and those of pitch pine lumber were 3.38 and 0.46%/hr respectively. 3. Compared to lumber of both species on conventional schedule, moisture gradient of high-temperature lumber was greater. 4. Compared to lumber on conventional schedule, maximum surface checking of high-temperature lumber of both species was severer, and maximum end checking of high-temperature lumber of both species was similar to that of lumber on conventional schedule. 5. Compard to lumber on conventional schedule, Korean red pine lumber dried at high temperature showed more honeycombing, but pitch pine lumber dried at high-temperature showed significantly slighter honeycombing. 6. Compared to lumber on conventional schedule, the high-temperature lumber showed less warping lumber of both species. 7. Collapse and casehardening of Korean red pine and pitch pine lumber on both scheules were slight.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.61-64
• /
• 2008

We investigated experimentally the influence of the generation efficiency for excited Xe atoms on ultra-fine horizontal cell pitch AC PDPs. In the case of a 0.1 mm cell pitch, the sustain voltage increased; however, the generation efficiency was equal to or higher than for the conventional 0.22 mm cell pitch.

• 대한전자공학회논문지
• /
• 제22권2호
• /
• pp.13-17
• /
• 1985

음성신호의 기본주파수를 구하는 새로운 방법인 area comparison method를 제안 하였다. 음성신호는 생성모델에 의한 한 pitch 구간에서 첫 봉우리의 면적이 강조 된다. 이 논문은 이러한 성질을 이용하여 pitch period를 구하는 것으로 기존의 방법에 비해 많은 장점을 갖는다. 시간 영역에서 취급하고 알고리즘이 간단하기 때문에 고속이다. 또한 sample의 개개가 아닌 면적을 적용하므로 impulse 성 잡음이나, 전처리 filtering이 필요없게 된다.

• Carbon letters
• /
• 제23권
• /
• pp.48-54
• /
• 2017

This research considers the effect of added mesophase pitch (MP) as an additive during the pitch synthesis reaction of pyrolyzed fuel oil (PFO). Two effects are generated by adding MP. One is an enhancement of thermal stability due to the high thermal property of the additive; the other is that the volatile compounds that were removed by vaporization of PFO during the thermal reaction can participate in the pitch synthesis reaction ($PFO{\rightarrow}pitch$) more efficiently. The effect differs according to the amount of the additive. When the amount of the additive is less than 7 wt%, the first effect is dominant, whereas the second effect is dominant when the additive amount exceeds 10 wt%.

• 융합신호처리학회논문지
• /
• 제9권2호
• /
• pp.159-163
• /
• 2008

본 논문에서는 유연모드 부속물을 갖는 우주선의 제어를 위해서 누스범 이득을 갖는 간단한 형태의 적응제어기를 제안한다. 이 방법은 전달함수에서 고주파 이득의 정보가 필요하지 않는다. 본 논문의 방법을 사용하여 피치각도가 목표치를 추종하는 중에, 아울러 유연모드의 안정화도 이룬다. 피치각과 피치각속도 성분만 사용하여 출력궤환제어기를 설계한다. 특히 모든 시스템 파라미터 및 고주파성분은 미지로 한다. 설계의 간편성을 위해서 선형함수만을 사용하여 설계한 제어기가 전체 비선형시스템을 만족함을 시뮬레이션을 통하여 보이고, 그 근거도 설명한다. Lyapunov 함수를 구성하여 제안한 방법의 안정성을 증명하고, MATLAB을 이용한 컴퓨터 시뮬레이션 결과를 제시하여 제안한 방법의 유용성을 증명한다.

• 대한후두음성언어의학회지
• /
• 제5권1호
• /
• pp.69-74
• /
• 1994

Thyroplasty type III provides an effective mean of shortening the vocal fold. It is used primarily fer lowering vocal pitch. The indications for this surgery are the male patients with too high a vocal pitch of long duration which has proven resistant to voice therapy and a type of dysphonia characterized by high pitch and a breathy voice, in which the laryngeal findings include a very narrow glottal chink and a small amplitude of vibration, suggesting a stiff vocal cord. In this study, we have experienced two cases of high pitched voice, one is mutational falsetto and other is high pitched, breathy voice with stiff vocal fold. The results were satisfactorily successful with type III thyroplasty. So we report the cases of type III thyroplasty in patients of dysphonia with high pitched voice.

• 말소리와 음성과학
• /
• 제5권1호
• /
• pp.19-26
• /
• 2013

The aerodynamic characteristics (subglottal pressure (Ps) and mean airflow rate (MFR)), fundamental frequency (Fo), intensity (I), vocal efficiency (VE), and closed quotient (CQ) were compared during a sustained vowel /o/ sound under three conditions: in a comfortable loudness and pitch level (condition 1), in a maximum loudness level with a fixed pitch (condition 2), and in a maximum loudness level without a fixed pitch (condition 3). Also, multiple regression analyses were done to measure the aerodynamic characteristics affect on the VE and the CQ in each condition. The results showed the Fo, Ps, MFR, VE, and CQ increased as I increased with and without fixed pitch. Most notably, VE in condition 3 was the highest of all the conditions, but CQ was not very high. By the results of multiple regression analysis, VE was significantly affected by I and Ps in all conditions; Fo was the other main key for affecting VE in high pitch. However, none of the aerodynamic characteristics significantly affected CQ. As I increases, Fo should be increased by increasing Ps and VE. Therefore, researchers should consider and specify an a priori to Fo, Ps, and I when measuring VE to examine the complex and delicate vocal mechanism.

• 한국항공우주학회지
• /
• 제32권6호
• /
• pp.72-80
• /
• 2004

본 논문에서는 추력중단 후 무유도방식 유도탄의 추력비행단계 유도알고리듬의 설계과정을 다룬다. 유도의 목적은 추력중단 시점에서 요구속도벡터를 성취하기 위한 것이다. 구현 가능한 피치평면 비행궤적을 조사하기 위해 네 가지 성능지수에 대한 비행궤적 최적화를 수행하였다. 궤적최적화 결과로부터 구속조건들을 만족시키기 위해서는 비행초기에 고앙각 기동이 필요함을 알 수 있다. 제안된 유도알고리듬은 개루프 피치자세각 명령 산출기인 피치프로그램과 증가요구속도벡터를 0으로 만들기 위한 요자세각 명령 산출기로 구성된다. 피치프로그램은 궤적최적화 결과 얻어진 피치자세각 선도를 이용하여 구성되었다.

• Carbon letters
• /
• 제4권4호
• /
• pp.185-191
• /
• 2003

Two types of carbon fiber based high modulus- and isotropic-pitch were exposed to isothermal oxidation in air and $CO_2$ gas and the weight change was measured by TGA apparatus. The kinetic equation was introduced $f=1-{\exp}(-at^b)$ and the constant b was obtained in the range of 1.02~1.68 for the isotropic fiber and obtained 0.91~1.93 for the high modulus fiber respectively. In considering the effect of the atmosphere for isothermal oxidation, the value of the constant b obtained in the carbon dioxide was higher than that obtained in the air. Therefore, it was found that the pitch based carbon fiber shows sigmoidal characteristic when it is oxidized in the carbon dioxide. In addition, it was also found that $k_f = 0.5$, which was reaction constant at f = 0.5, was a very useful parameter for evaluation of the oxidation reactivity of pitch based carbon fibers. According to the consideration, it is suggested that the conversion-time curves of the pitch based carbon fibers are correlated by normalized equation $f=1-{\exp}(-A{\tau}^B)$, where ${\tau}=t/t_f= 0.5$.