• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.327-328
• /
• 2008

In this study, it was studied about the improved road light design for drivers and pedestrians using ray- or reverse ray-tracing method. Many of conventional road lights are not suitable for drivers and pedestrians because it has some serious problems such as glare effect or randomicity of illuminated areas. It was oriented from customary design method which was pointed at simple target such as luminance or electrical power. But it was not truth any more that the high luminance or electrical power consumption mean more bright and good road light. We studied ray-tracing method for road light reflector design to get the several goals. It means that good road light has easy for drivers and pedestrians eyes and illuminating objects on the road clearly. So, we set the design targets such as uniformity on the road area per one road light, shading angles and continuous luminance uniformity on the long distance road. We designed ideal road light conditions using ray-tracing method. We set the height of drivers and pedestrians eyes and calculated design guideline to make above design targets. Then we designed road light reflector using reverse ray-tracing method. And we achieved same luminance on the road almost half power consumption because we reduced loss of light. We achieved ideal design guide as 75 degrees of shading angles and 0.5 of luminance uniformity on the road area. Finally, we suggested reflector design for 250 watts power consumption CDM light source.

• 대한전자공학회논문지SP
• /
• 제41권5호
• /
• pp.35-44
• /
• 2004

디지털 미디어 데이터의 증가에 따라 디지털 미디어를 효과적으로 관리하고 사용하기 위하여 다양한 비디오 색인 및 비디오 시퀀스 정합 알고리즘이 제안되었다. 본 논문에서는 급격한 밝기 변화를 가지는 비디오 시퀀스에 대해서 효율적인 비디오 색인 알고리즘과 비디오 시퀀스 질의에 대한 비디오 시퀀스 정합 알고리즘을 제안한다. 급격한 밝기 변화를 고려한 비디오 색인의 정확도를 향상시키고 계산량을 줄이기 위해 제안한 알고리즘은 칼라 특성뿐만 아니라 에지 특성도 함께 사용하였으며 기존의 알고리즘에 비해 현저한 성능 향상을 보였다. 제안한 알고리즘은 먼저 칼라 히스토그램을 사용하여 후보 샷경계 지점을 추출하고 에지 정합과 밝기 보상을 이용하여 후보점들이 샷경계인지 밝기 변화인지를 결정한다 장면내의 밝기 변화가 작은 경우 에지 정합과 밝기 보상은 샷경계에서만 일어난다. 실험 결과 제안한 방법은 기존의 방법에 비해 비슷한 계산량으로 현저히 향상된 성능과 효율을 보였다.

• Transactions on Electrical and Electronic Materials
• /
• 제11권4호
• /
• pp.194-196
• /
• 2010

A study is presented of improved road light design for drivers and pedestrians with the use of a ray- or reverse ray-tracing method. Many existing road lights are unsuitable for drivers and pedestrians because of serious problems such as glare effect or randomicity of illuminated areas. This situation has arisen because in customary design methods the emphasis has been on simple factors such as luminance or electrical power. However a high luminance or electrical power consumption, alone, do not guarantee bright and good road lighting. So we have applied a ray-tracing method to the design of a road light reflector with the goals of ensuring that illuminated objects on the road can be seen more clearly and that the illuminating light is more comfortable for the eyes of drivers and pedestrians. We have set design targets for factors such as the uniformity of lighting on the road area per road light, the shading angles and the continuous luminance uniformity on long lengths of road. For set heights of the eyes of drivers and pedestrians eyes we have calculated a design guideline for the achievement of the above design targets. Then we designed a road light reflector using the reverse ray-tracing approach. Also we have achieved the same luminance on the road with almost half the power consumption, through the reduction of lighty loss. In an ideal design optimum parameters are suggested to be a shading angle of 75 degrees and a luminance uniformity of 0.5 on the road area. This reflector performance is achievable with a 250 watt power consumption ceramic discharge metal light source.

• 한국세라믹학회지
• /
• 제52권4호
• /
• pp.229-233
• /
• 2015

Currently, the majority of commercial white LEDs are phosphor converted LEDs made of a blue-emitting chip and YAG yellow phosphor dispersed in organic silicone. However, silicone in high-power devices results in long-term performance problems such as reacting with water, color transition, and shrinkage by heat. Additionally, yellow phosphor is not applicable to warm white LEDs that require a low CCT and high CRI. To solve these problems, mixing of green phosphor, red phosphor and glass, which are stable in high temperatures, is common a production method for high-power warm white LEDs. In this study, we fabricated conversion lenses with LUAG green phosphor, SCASN red phosphor and low-softening point glass for high-power warm white LEDs. Conversion lenses can be well controlled through the phosphor content and heat treatment temperature. Therefore, when the green phosphor content was increased, the CRI and luminance efficiency gradually intensified. Moreover, using high heat treatment temperatures, the fabricated conversion lenses had a high CRI and low luminance efficiency. Thus, the fabricated conversion lenses with green and red phosphor below 90 wt% and 10 wt% with a sintering temperature of $500^{\circ}C$ had the best optical properties. The measured values for the CCT, CRI and luminance efficiency were 3200 K, 80, and 85 lm/w.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2009년도 IWAIT
• /
• pp.154-157
• /
• 2009

High dynamic range image can describe the real world scenes that have a wide range of luminance intensity. To display high dynamic range (HDR) image into conventional displayable devices such as monitors and printers, we proposed the logarithmic based global mapping algorithm that consider the features of image using mapping parameters. Based on characteristics of image, we first modify input luminance values for reproducing perceptually tuned images and then displayable output values are obtained directly. The experimental results show that the proposed algorithm achieves good subjective results while preserving details of image, furthermore proposed algorithm has fast simple and practical structure for implementation.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.477-479
• /
• 2006

In this study, a stripe type counter electrode discharge cell for PDP was attempted to realize high luminance efficiency and low firing voltage for fine pitch discharge cells. The cells were prepared using electroplated Cu/Ni electrodes coated with glass dielectric layer. The discharge behaviors of such cells were observed. These results indicate that the counter electrode discharge cells have different discharge behavior compared with coplanar cells, which may affect the luminance efficiency of the panel.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.932-934
• /
• 2003

For the insulator of inorganic thin film electroluminescent (TFEL), devices AlON combined with TiON was used and it exhibits higher luminance than AlON as well as $Al_{2}O_{3}$ insulator. Furthermore, using AlON with TiON film show better stability and higher luminance than that with $TiO_{2}$ grown by conventional atomic layer deposition (ALD) for the application of the insulator of ZnS:Mn TFEL device.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.817-819
• /
• 2009

We have developed highly efficient blue phosphorescent organic light-emitting devices (PHOLEDs) with simplified architectures using new host materials. The Blue PHOLED with new host:FIrpic emitting layer exhibits a maximum luminance efficiency of 34 cd/A and a low operating voltage 5 V at a high luminance of 1212 cd/$m^2$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.799-802
• /
• 2004

In this paper, the active backlight control technology with data processing algorithm was developed in order to improve image quality for IPS-mode LCD-TV applications. The image blinking problem caused by repeatedly abrupt change of the backlight luminance was solved by algorithms-Fba(Flexible Boundary algorithm) and Cfa(Cumulative Feedback algorithm)-and the optimized number and space of backlight dimming steps based on perception. In the IPS-mode 42" TFT-LCD panel, the dynamic contrast ratio can be more than twice the typical level by means of lower block luminance and higher white luminance. Additionally, Power consumption and LCD temperature was decreased.

• 조명전기설비학회논문지
• /
• 제16권1호
• /
• pp.8-12
• /
• 2002

본 논문은 LCD의 백라이트로서 고휘도를 내는 간단한 구조의 평판형광램프를 연구하였다. 평판형광램프는 ITO glass와 절연층, 형광층, 전극층, gas층으로 구성된다. 이 램프의 방전개시전압은 주파수가 증가하면 감소하며 이러한 경향으로는 gas층에서 트립된 Xe과 Ar 양이온에 기인된 공간방전효과의 결과이다. 높은 구동 주파수에서 uniform 전압의 감소는 초기 구동에서 발생된 남아있는 공간전하에 기인한다. 결과로서 Xe gas를 사용한 평판형광램프는 구동전압 700[ $V_{rms}$], 주파수 80[kHz]에서 2700[cd/ $m^2$]의 휘도, 균일도 96[%], 최대 효율은 51[m/W]를 얻었다.다.