• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1185-1188
• /
• 2007

The address discharge characteristics by the various scan-low and common-bias voltages are investigated based on measured address discharge time lags and $V_t$ close-curve analysis. The scan-low voltages are changed under the same voltage difference between the X and Y electrodes during an address period. As the voltage difference between the scan and address electrodes is increased during an address period, the address discharge time lag is shortened but the background luminance is increased. It is found that the improved address discharge characteristics is caused by the effect of the higher external applied voltage during an address period than the accumulated wall charges during a reset period and the high background luminance can be prevented by applying an address-bias voltage during a rising-ramp period and low reset voltage.

• 한국진공학회지
• /
• 제11권1호
• /
• pp.76-80
• /
• 2002

외관 전극의 용량성 결합에 의하여 동작되는 형광램프의 특성을 조사하였다. 외관전극 형광램프는 10 mA 이하의 저전류와 약 1.5 kV의 고전압으로 구동된다. 구동 주파수 100 kHz 이하의 구형파 구동에 의하여 효율 40 lm/W의 20,000~30,000 cd/$\textrm m^2$의 고휘도를 실현하였다. 외관전극의 길이가 길수록 휘도와 효율이 증가하지만, 전극 길이가 3 cm 이상에서 그 증가율이 둔화된다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.388-391
• /
• 2008

A new reset waveform with negative ramp pulse was proposed. Comparative experiments between the negative and positive waveforms were performed. During reset period, IR distributions and luminance of black and white conditions were measured with the 42-inch XGA PDP module. The negative waveform improved contrast ratio about 15.4 ~ 22.5 % than the positive waveform by lowing the black luminance in reset period. Z bias (= Vbb) of the positive waveform was 27 V higher than the negative waveform.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 Ⅳ
• /
• pp.1875-1878
• /
• 2003

This paper Proposes a wavelet-based video compression method to improve compressed images using modification of wavelet coefficients. In conventional wavelet-based compression methods, bigger coefficients are transmitted early according to the significance of the coefficients. In this reason, when some coefficients which have more significance but are not bigger are not transmitted, image degradation occurs. The Proposed method considered two human visual characteristics. First, human eyes are more sensitive to the change of middle frequency which represents abrupt change of brightness than that of high frequency which expresses fine region. Second, human eyes are more dull to color component than luminance respectively. By adjusting the coefficients of wavelet transformed signals and allocating more bits for compression to the luminance signal, higher compression could be achieved.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2009년도 IWAIT
• /
• pp.755-759
• /
• 2009

This paper proposes an HDR display system using multi-projectors for presentation of HDR contents to multi-users. An HDR image is resolved by luminance and the resolved images are assigned to several projectors. The proposed system projects the HDR contents onto a large screen, and the system can display the HDR contents to multi-users. The proposed system realized to output the broad luminance by emitting the light of multi-projectors onto the same screen. In addition, tonal steps of the proposed system increase so that other projectors cover the tonal steps in the region where the dynamic range is expanded. In this paper, we indicate an effectiveness of the proposed system.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2009년도 IWAIT
• /
• pp.23-27
• /
• 2009

A scalable video coding (SVC) extension to the H.264/AVC standard has been developed by the Joint Video Team (JVT). SVC provides spatial, temporal and quality scalability with high coding efficiency and low complexity. SVC is now developing the extension of the first version including color format scalability. The paper proposes to remove some luminance related header and luminance coefficients when an enhancement layer adds only additional color information to its lower layer. Experimental results shows 0.6 dB PSNR gain on average in coding efficiency compared with an approach using the existing SVC standard.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2000년도 제1회 학술대회 논문집
• /
• pp.149-150
• /
• 2000

Lead-doped calcium sulfide(CaS:Pb) thin film electroluminescent devices were deposited using atomic layer deposition(ALD). CaS:Pb is a very promising blue phosphor showing very high luminance and the color coordinate close to the blue of cathode ray tube. The luminance, $L_{25}$, of CaS:Pb(1.6 mol.%) EL device was higher than 80 $cd/cm^2$ at a driving frequency of 60Hz. The color coordinates of blue EL emission of CaS:Pb deposited by ALD are consistent with the Pb concentration ranging from approximately 0.5 to 3 mol.%.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.259-262
• /
• 2005

Image retention is a kind of fatal shortcoming of the AC PDPs for realizing high-quality picture. In this work, the measurement method of image retention was proposed using temporal measurement of luminance, CIEXYZ tristimulus values, IR emission of reset pulse, and temperaturel. On the base of temporal measurement of luminance, CIEXYZ tristimulus value, and IR emission of reset pulse, the retention time of Ne+5%Xe gas-mixture discharge was about 2 hours after white window image. However, it was about 20 minute on the base of temporal measurement of temperature.

• 반도체디스플레이기술학회지
• /
• 제15권4호
• /
• pp.79-85
• /
• 2016

For long life time and high efficiency, not necessary in improvement of LED chip structure, but also improve heat radiation for decrease heat in LED chip. In this study, efficiency decline factor has been investigated in LED lamp as study heat characteristic, luminance flux and heat resistance. When LED lamp temperature was increased, about 7% loss of luminance flux. In consequence of temperature analysis, width of fin was the most important factor of heat radiation. As a result, secure the enough heat path is very important factor of LED lamp design.

• 반도체디스플레이기술학회지
• /
• 제19권1호
• /
• pp.49-54
• /
• 2020

The voltage drop due to the thin cathode film at the large size top emission OLED panel was successfully compensated with making electrical contact between thin cathode and anode auxiliary electrode by 355nm wavelength of laser. It was found that the luminance uniformity dramatically increased from around 15% to more than 80% through this electrical compensation between thin cathode and anode auxiliary electrode. Moreover, the removing process for EL materials on the anode auxiliary electrode process by laser was very reliable and stable. Therefore, it is thought that the EL removal method using laser to make electrical contacts is very appropriate to mass production for such a large size top emission OLEDs to obtain high uniformity of luminance.