• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2000년도 춘계학술발표대회
• /
• pp.189-192
• /
• 2000

광합성 홍색세균의 light harvesting complex II (LHC II)발현 유전자가 제거된 돌연변이종을 halogen 램프 하에서 거리에 따라 광도를 달리하며 배양하여 wild type과 생산성을 비교한 결과 낮은 광도(34 ${\mu}E/m^2/s$)에서는 wild type가 높은 광도 (376, 118 ${\mu}E/m^2/s$)에서는 mutant가 높은 세포농도를 나타내었다. 특히 118 ${\mu}E/m^2/s$에서 LHC $II^-$ mutant가 56% 높은 세포생산량을 보였다. 이는 세포내 pigment양의 감소로 mutual shading effect가 감소하였기 때문으로 판단되었다.

• 한국콘텐츠학회논문지
• /
• 제8권11호
• /
• pp.18-24
• /
• 2008

유기 발광 다이오드(Organic light-emitting diode, OLED)는 저전력 구동, 자체발광, 넓은 시야각, 우수한 고해상도, 풀 칼라, 높은 재현성, 빠른 응답속도, 간편한 제조 공정 등의 장점을 가지고 있으나, 고성능 디스플레이로서 실용화하기 위해서는 아직도 해결되어야 할 과제가 많다. 소자의 저소비전력, 제조공정의 안정성, 대형 기판기술, 봉지 기술, 소자의 수명, 풀 컬러화를 위한 적색, 청색, 발광 소자의 고휘도등이 시급하다. 무엇보다 중요한 것은 유기 발광 소자의 효율을 향상시키는 것이 상용화를 위한 키(key)이다. 이를 위해서 유기 발광 소자의 구조 개선과 새로운 유기 물질 적용을 통해 구동전압을 낮춤으로써 효율을 향상시킬 수 있다. 따라서 본 연구에서는 유기 발광 소자의 효율을 향상시킬 목적으로 ITO/TPD/Znq2+DCJTB/Znq2/Al의 구조와 ITO/CuPc/NPB/Alq3+DCJTB/Alq3/Al의 구조를 가지는소자의 발광 층에 형광염료를 도포한 적색 발광 소자를 제작하고, 그 전기적 및 광학적인 특성을 평가하였다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2006년도 춘계학술대회 논문집
• /
• pp.154-156
• /
• 2006

A few ten mW white LED can substitute for the indicator light source and it is required to study several watt multi-chip semiconductor light sources in order to replace the light sources for general illumination such as incandescent lights and fluorescent lanes. Since the optical technology used for several mW white LED light source uses only 30% to 52% of the light it is required to develop the design technology of optical system and lens to improve the efficiency more than 80% for insuring the high power of white LED. In this paper, we designed and fabricated new structure reflector to increase the efficiency and is easy to make high power multi-chip LED lamp.

• 조명전기설비학회논문지
• /
• 제18권3호
• /
• pp.20-26
• /
• 2004

본 논문에서는 조명용 고휘도(HB, high brightness) 백색 LED(light emitting diode)램프의 배열 및 여러 가지 등기구 글로브(globe)의 형태에 따른 광도(luminous intensity)값과 기구효율(luminaire efficiency)을 컴퓨터 시뮬레이션으로 수행하여 비교분석 하였다. 즉, LED의 배열은 가로${\times}$세로(7개${\times}$7개)가 정사각형 형태로 49개를 배열하고, LED 간격은 LED의 발광면 중심부로부터 8.2[mm], 10.0[mm], 15.0[mm]로 각각 3가지로 하였으며, 등기구의 글로브는 LED발광면 중심부에서 30[mm], 50[mm] 떨어진 거리로 구분하였다. 또한 등기구 글로브가 없을 때와 있을때로 구분하여 있을 때에는 글로브 형태를 볼록 원형과 엠보(embossing)형태로 구분하고 엠보는 8.2[mm], 5.0[mm]의 크기에 따른 선택으로 시뮬레이션 27가지로 수행하여 등기구의 글로브 형태에 따른 광도 및 기구효율을 고찰해 봄으로써 앞으로 21세기 디지털조명이라고 일컫는 LED를 사용한 LED 광원(light source) 및 등기구 개발에 많은 도움이 되고자 하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.324-325
• /
• 2006

In order to develop high efficiency white organic light-emitting diodes (OLEDs), OLED devices consisted of red and blue emitting layers (EMLs) were fabricated and the effect of respective layer thickness and the order of layer stacking on the luminous efficiency was evaluated Red/blue structure showed higher efficiency than blue/red, due to the higher exiton formation. In the blue layer of red/blue structure. However, the efficiency of the red/blue significantly depended on the thickness of the red layer, whereas the thickness of the blue layer was not affect so much. The optimum thickness of the red layer was 20 ${\AA}$, where the luminous and power efficiencies were 155 cd/A and 10.51 lm/W at 1000~3000$cd/m^2$ respectively and the maximum luminance was about 80,000 $cd/m^2$.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2017년도 전력전자학술대회
• /
• pp.38-39
• /
• 2017

This paper proposes a new control method for an AC-DC Buck converter which is utilized as a front-end converter of a 2-stage high power density adapter. In the conventional adapter applications, 2-stage configuration shows higher power transfer efficiency and higher power density than those of the single stage flyback converter. In the 2-stage AC-DC converter, the boost converter is widely used as a front-end converter. However, an efficiency variation between high AC line and low AC line is large. On the other hand, the proposed conduction band control method for a buck front-end converter has an advantage of small efficiency variation. In the proposed control method, switching operation is determined by a band control voltage which represents output load condition, and an AC line voltage. If the output load increasesin low AC line, the switching operation range is expanded in half of line cycle. On the contrary, in light load and high line condition, the switching operation is narrowed. Thus, the proposed control method reduces switching loss under high AC line and light load condition. A 60W prototype which is configured the buck and LLC converter with the proposed control method is experimented on to verify the validity of the proposed system. The prototype shows 92.16% of AC-DC overall efficiency and 20.19 W/in 3 of power density.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1161-1164
• /
• 2005

A Mercury-free, flat light source which shows high luminance and luminous efficiency simultaneously has been developed. An electrodeless, dielectric barrier discharge is used to generate the plasma using Ne-Xe mixture gas of relatively low gas pressure of a few tens torr in a 4.1 inch diagonal size of flat panel. The basic properties of the long gap glow discharge and its accompanying instabilities, which prevents us from having high luminous efficiency discharge have been analyzed. A new structure and optimized driving methods have been used to generate a glow discharge which shows a wide voltage margin of a few hundred volts. The luminous efficiency and luminance could be 110 lm/W at $1300\;cd/m^2$ and 50 lm/W at $5500\;cd/m^2$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.184-187
• /
• 2009

In this paper, we study effect of charge balance on performance of blue phosphorescent organic light emitting diodes (OLEDs). Charge balance determines the location of recombination zone in the OLEDs. By tuning the charge balance in iridium (III) bis[(4,6-difluorophenyl)-pyridinate-N,C2']picolinate (FIrpic) based blue phosphorescent organic light-emitting devices (PHOLEDs) with a high mobility and high triplet energy electron transporting material, we were able to achieve a high current efficiency of 60 cd/A which is a 3X improvement over previous devices with 3,5'-N,N'-dicarbazole-benzene (mCP) host.

• Journal of the Optical Society of Korea
• /
• 제16권3호
• /
• pp.292-298
• /
• 2012

The epitaxial layer structures for blue InGaN light emitting diodes have been optimized for high brightness applications with the output power levels exceeding 1000 $W/cm^2$ by using a self-consistent finite element method. The light-current-voltage relationship has been directly estimated from the multiband Hamiltonian for wurtzite crystals. To analyze the efficiency droop at high injection levels, the major nonradiative recombination processes and carrier spillover have also been taken into account. The wall-plug efficiency at high injection levels up to several thousand $A/cm^2$ has been successfully evaluated for various epilayer structures facilitating optimization of the epitaxial structures for desired output power levels.

• 세라미스트
• /
• 제22권3호
• /
• pp.218-229
• /
• 2019

The development of highly efficient thermally activated delayed fluorescence (TADF) materials is an active area of recent research in organic light emitting diodes (OLEDs) since the first report by Chihaya Adachi in 2011. Traditional fluorescent materials can harvest only singlet excitons, leading to the theoretically highest external quantum efficiency (EQE) of 5% with considering about 20% light out-coupling efficiency in the device. On the other hand, TADF materials can harvest both singlet and triplet excitons through reverse intersystem crossing (RISC) from triplet to singlet excited states. It could provide 100% internal quantum efficiencies (IQE), resulting in comparable high EQE to traditional rare-metal complexes (phosphorescent materials). Thanks to a lot of efforts in this field, many highly efficient TADF materials have been developed. This review focused on recent molecular design concept and optoelectronic properties of TADF materials for high efficiency and long lifetime OLED application.