• 한국전기전자재료학회논문지
• /
• 제21권12호
• /
• pp.1063-1070
• /
• 2008

The performance of an acoustic transducer is determined by the effects of many design variables, and mostly the influences of these design variables are not linearly independent of each other. To achieve the optimal performance of an acoustic transducer, we must consider the cross-coupled effects of the design variables. In this study, the variation of the performances of underwater acoustic transducer in relation to its structural variables was analyzed. In addition, the new optimal design scheme of an acoustic transducer that could reflect not only individual but also all the cross-coupled effects of multiple structural variables, and could determine the detailed geometry of the transducer with great efficiency and rapidity was developed. The validation of the new optimal design scheme was verified by applying the optimal structure design of a flextensional transducer which are the most common use for high power underwater acoustic transducer. With the finite element analysis(FEA), we analyzed the variation of the resonance frequency, sound pressure, and working depth of a flextensional transducer in relation to its design variables. Through statistical multiple regression analysis of the results, we derived functional forms of the resonance frequency, sound pressure, and working depth in terms of the design variables. By applying the constrained optimization technique, Sequential Quadratic Programming Method of Phenichny and Danilin(SQP-PD), to the derived function, we designed and verified the optimal structure of the Class IV flextensional transducer that could provide the highest sound pressure level and highest working depth at a given operation frequency of 1 kHz.

• 한국식물생명공학회:학술대회논문집
• /
• 한국식물생명공학회 2005년도 추계학술대회 및 한일 식물생명공학 심포지엄
• /
• pp.71-80
• /
• 2005

Effects of low temperature ($8^{\circ}C$) on the hydraulic conductivity of young roots of a chilling-sensitive (cucumber; Cucumis sativus L.) and a chilling-resistant (figleaf gourd; Cucurbita ficifolia Bouche) crop have been measured at the levels of whole root systems (root hydraulic conductivity, $Lp_r$) and of individual cortical cells (cell hydraulic conductivity, Lp). In figleaf gourd, there was a reduction only in hydrostatic $Lp_r$ but not in osmotic $Lp_r$ suggesting that the activity of water channels was not much affected by low root temperature (LRT)treatment in this species. Changes in cell Lp in response to chilling and recovery were similar asroot level, although they were more intense at the root level. Roots of figleaf gourd recovered better from LRT treatment than those of cucumber. In figleaf gourd, recovery (both at the root and cell level) often resulted in Lp and $Lp_r$ values which were even bigger than the original, i.e. there was an overshoot in hydraulic conductivity. These effects were larger forosmotic (representing the cell-to-cell passage of water) than for hydrostatic $Lp_r$. After a short term (1 d) exposure to $8\;^{\circ}C$ followed by 1 d at $20\;^{\circ}C$, hydrostatic $Lp_r$ of cucumber nearly recovered and that of figleaf gourd still remained higher due to the overshoot. On the contrary, osmotic $Lp_r$ and cell Lp in both species remained high by a factor of 3 as compared to the control, possibly due to an increased activity of water channels. After pre-conditioning of roots at LRT, increased hydraulic conductivitywas completely inhibited by $HgCl_2$ at both the root and cell levels. Different from figleaf gourd, recovery from chilling was not complete in cucumber after longer exposure to LRT. It is concluded that at LRT, both changes in the activity of aquaporins and alterations of root anatomy determine the water uptake in both species. To better understand the aquaporin function in plants under various stress conditions, we examined the transgenic Arabidopsisand tobacco plants that constitutively overexpress ArabidopsisPIP1;4 or PIP2;5 under various abiotic stress conditions. No significant differences in growth rates were found between the transgenic and wild-type plants under favorable growth conditions. By contrast, overexpression of PIP1;4 or PIP2;5 had a negative effect on seed germination and seedling growth under drought stress, whereas it had a positive effect under cold stress and no effect under salt stress. Measurement of water transport by cell pressure probe revealed that these observed phenotypes under different stress conditions were closely correlated with the ability of water transport by each aquaporin in the transgenic plants. Together, our results demonstrate that PIP-type aquaporins play roles in seed germination, seedling growth, and stress response of Arabidopsis and tobacco plants under various stress conditions, and emphasize the importance of a single aquaporin-mediated water transport in these cellular processes.

• 항공우주시스템공학회지
• /
• 제16권3호
• /
• pp.84-92
• /
• 2022

전기-정유압식 작동기(EHA)는 독립적으로 유동력원을 운용함에 따라, 복잡한 유압 배관을 제거할 수 있어 누유 및 중량 최소화, 안전성 향상의 장점이 있어 최근 항공기용 비행제어 분야에서 사용되고 있다. 이러한 EHA를 탑재하는 항공기의 경우, 기존 중앙 유압시스템을 탑재한 항공기에 비해 제한된 냉각원에 따른 EHA의 열관리 이슈가 대두된다. 이러한 열관리 이슈의 해결을 위해서는, EHA의 열특성을 예측할 수 있는 열해석 모델이 필요하다. 본 연구에서는 유압펌프 및 전기모터로 구성되는 EHA 유압동력모듈의 내부 회전체를 고압 하에서 고속으로 회전이 가능하도록, 유압동력모듈 내부에 유체 순환 회로를 적용하였다. 적합한 열해석 모델을 구축하고, 유냉식 또는 비유냉식 유압동력모듈 적용에 따른 해석 결과의 비교 및 검토를 통해 EHA의 열특성 영향성을 확인하고자 하였다.

• 한국지반환경공학회 논문집
• /
• 제11권12호
• /
• pp.27-35
• /
• 2010

지하공간에 설치되는 구조물 중 지하수위 아래에 위치하는 부분은 상향으로 정수압인 부력이 작용하게 된다. 최근 큰 규모의 중요구조물 즉, 부력이 크게 발생하는 구조물은 공사비가 고가이나 안전율을 확실하게 증가시키는 방법인 부력저항 영구앵커를 많이 적용하고 있는 실정이다. 그러나, 부력저항 영구앵커의 저항 메커니즘 규명은 미흡한 실정이다. 특히, 시공 후 앵커의 장기거동에 대한 규명은 계측 관리의 어려움으로 이루어지지 않고 있는 것이 현실이다. 본 연구에서는 부력 저항 영구앵커의 설계 시 합리적인 구조물 거동 평가를 위하여 앵커두부에 하중계를 설치하여 앵커축력을 자동화계측 및 수동계측을 통해 시공초기부터 10년간 계측 분석하였으며, 이를 토대로 건물의 자중증가에 따른 앵커의 시공단계별 거동과 시간 경과에 따른 앵커의 장기거동(시공 후 10년 이내의 거동)을 분석하였다.

• 광물과 암석
• /
• 제33권1호
• /
• pp.11-18
• /
• 2020

천연산 일라이트(K_0.65Al₂(Al_0.65Si_3.35)O₁₀(OH)₂) 분말 시료에 대해 물과 알코올(메탄올:에탄올 = 4:1 체적비, ME41)의 두 가지 압력매개체를 이용한 다이아몬드앤빌셀 고압 회절실험을 진행하였다. 물을 이용한 실험에서는 층간 유입을 유도하기 위해 약 250℃까지 열을 가하는 과정을 거치며 최대 약 2.7 GPa까지 압력을 가하였고, 알코올을 이용한 실험에서는 상온에서 최대 약 6.9 GPa까지 가압하면서 방사광 분말 회절법을 통해 시료의 압축특성을 관찰하였다. 위와 같은 조건에서는 층간의 확장이나 상전이는 관찰되지 않았다. 물과 알코올의 서로 다른 압력매개체 하에서 압축된 일라이트의 체적탄성률(K₀)은 각각 45(3) GPa와 51(3) GPa로 도출되어 오차범위 내에서 크게 다르지 않음을 확인하였다. 또한 회절자료 분석결과 격자상수에 따른 선형압축률은 알코올 압력매개체일 때 β^a, β^b, β^c의 값이 각각 0.0025 GPa^-1, 0.0029 GPa^-1, 0.0144 GPa^-1로 도출되어 c-축의 압축률이 약 6배 큰 것으로 확인되었다. 본 연구에서 확인된 일라이트의 체적탄성률 및 선형압축률을 일라이트와 구조적으로 유사한 백운모와 비교하였다.

• 콘크리트학회논문집
• /
• 제18권2호
• /
• pp.213-218
• /
• 2006

시멘트페이스트 공극 내 확장 메니스커스 영역을 초승달 영역, 박막 영역, 흡착 영역으로 구분하고 공극 크기에 따른 액막 두께, 흡착층 두께, 모세관 압력, 분리 압력을 압력 평형 방정식을 이용하여 산정하였다. 그 결과 공극 크기와 흡착층 두께와의 연관식을 도출할 수 있었으며, 공극 크기 $1nm{\sim}1{\mu}m$에 따른 흡착층 두께는 $0.299{\sim}2.700nm$로 나타났고 특히 10nm이하의 공극에서 흡착층 두께 감소에 따른 분리압력의 증가효과가 크게 나타났다. 따라서 시멘트페이스트의 자기 수축은 10nm이하의 공극이 생성되면서 크게 증가하는 것으로 판단된다. 이러한 분리 압력과 모세관 압력을 수축 구동력으로 적용한 자기 수축 예측치는 실험값에 비하여 재령 $1{\sim}4$일까지는 작게 이후부터는 큰 결과를 나타내었다. 이는 초기재령에서의 공극측정시 공극 손상과 이에 따른 수축구동력 과소평가와 불포화 개별공극 가정에 따른 수축구동력 과대평가의 상호작용으로 판단되므로 추후 이에 대한 보완점으로 수화도등의 공극 대체 모델과 불포화공극에 대한 고려사항이 필요할 것으로 판단된다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회 논문집
• /
• pp.409-413
• /
• 2005

Even though the relative importance of length scale of flow system allow us to simplify three dimensional flow problem to one or two dimensional representation, many systems still require three dimensional analysis. The objective of this study is to develop an efficient and accurate finite element model for analyzing and predicting three dimensional flow features in natural rivers and to offend to model spreading of pollutants and transport of sediments in the future. Firstly, three dimensional Reynolds averaged Navier-Stokes equations with the hydrostatic pressure assumption in generalized curvilinear coordinates were combined with the kinematic free-surface condition. Secondly. to simulate realistic high Reynolds number flow, the model employed the Streamline Upwind/Petrov-Galerkin(SU/PG) scheme as a weighting function for the finite element method in conjunction with an appropriate turbulence model(Smagorinsky scheme for the horizontal plain and Mellor-Yamada scheme for the vertical direction). Several tests is performed for the purpose of validation and verification of the developed model. A simple rectangular channel, 5-shaped and U-shaped channel are used for tests and comparisons are made with RMA-10 model. Runs for each case is converged stably without a oscillation and calculated water-surface deformation, longitudinal and transversal velocities, and velocity vector fields are in good agreement with the results of RMA-10 model.

• 한국응용과학기술학회지
• /
• 제13권3호
• /
• pp.137-144
• /
• 1996

Durable softening water repellents such as PODCW, PDDCW, and PEDCW were prepared by blending cationized polymers, fatty carbamide, waxes, and emulsifiers. The cationized polymers included poly (octadecyl methacrylate-co-2-diethylaminoethyl methacrylate) [PODC], poly (n-dodecyl methacrylate-co-2-diethylaminoethyl methacrylate) [PDDC]and poly (2-ethylhexyl methacrylate-co-2-diethylaminoethyl methacrylate) [PEDC]. After the PET fabrics were treated with these water repellents, water repellency, softness, and durability of the PET fabrics were examined by various methods : water repellency by the hydrostatic pressure and the contact angle methods, softness by crease recovery and tearing strength, and durability by washability, respectively. Rating of water repellency of PET fabrics treated with PODCW was $80^{+}$, but those treated with PDDCW and PEDCW were not high enough to be used in industry.

• 한국식품조리과학회지
• /
• 제22권3호통권93호
• /
• pp.402-417
• /
• 2006

Research interest on functional food and phytochemicals has mainly focused on their health effects, mechanism of action and structure-activity relationship for the development of nutraceuticals. Considering the intake of phytochemicals via the normal diet, further information is required on changes in food functionality or individual phytochemicals that occur during the cooking or processing of foods, in order to increase the intake of these bioactive compounds, because many of the unit-operating procedures involved in cooking or food processing may result in physicochemical changes of food constituents. This study reviews the changes of selected phytochemicals, i.e. flavonoids, organosulfur compounds and carotenoids, or food functionality by major cooking or processing procedures such as heating, fermentation, and pH changes. In general, heating has a negative effect on food functionality, although in some cases, mild heating increases bioactive phytochemical contents. Some phytochemicals, including anthocyanins and catechins, are stabilized in lower pH conditions. The structures of phytochemicals, including isoflavones and catechins, are changed by fermentation. The loss of bioactive compounds may be decreased by recently developed cooking or processing methods such as microwave cooking or use of high hydrostatic pressure. However, the effects of cooking and processing procedures on food functionality and phytochemicals are so diverse and dependent on test conditions that further research efforts are needed to form accurate conclusions on the effects of cooking and processing of foods.

• 자원환경지질
• /
• 제21권1호
• /
• pp.17-27
• /
• 1988

The Cretaceous Jinsan gold-bearing hydrothermal veins occur within the Late Proterozoic to Mid Ordovician metasedimentary rocks, intruded by Early Cretaceous pink-feldspar granite($142{\pm}2.0m.y.$). Electrum-galena-sphalerite mineralization was deposited in three stages of quartz and calcite veins. Quartz sulfide-bearing stage I and II evolved from initial high temperatures (near $360^{\circ}C$)to later lower temperatures(near $220^{\circ}C$)from lower salinity fluids(1.0 to 3.2 wt.% NaCl eq.). Fluid inclusion data from the post ore carbonate stage reflects much cooler($110^{\circ}$ to $180^{\circ}C$). Evidence of boiling indicates pressure of<85 bars, corresponding to depths of 400m to 1050m assuming lithostatic and hydrostatic loads. Au-deposition was likely a result of boiling, coupled with declining temperatures. The ${\delta}^{34}S$ $H_2S$ values calculated for sulfides are consistent with an igneous source of sulfur with a ${\delta}^{34}S_{{\Sigma}S}$ value near 4.0‰.