• 한국식품저장유통학회지
• /
• 제18권1호
• /
• pp.1-6
• /
• 2011

고추장굴비의 지방산패를 최소화하기 위하여 신선굴비를 동결건조한 굴비포를 사용하여 고추장굴비를 제조하고 비열처리 살균방법으로 초고압과 감마선 처리하여 저장 중에 품질과 미생물변화를 분석함으로서 고추장굴비의 저장과 유통기간 연장 가능성을 검토하였다. 초고압처리(200, 400, 600 MPa) 및 감마선 조사(7, 10, 20, 30 kGy) 후 pH 변화는 유의적으로 차이가 없었으며 20일 동안 상온에서 저장 중에도 시료간의 유의적인 변화를 보이지 않았다. 색도는 Hunter L값과 b값은 증가하는 경향을 보였으며 a값은 감소하는 경향을 보였으나 외관상 품질에 영향을 미칠 정도는 아니었다. 휘발성 염기질소 대조구와 처리구에서 저장 중 경시적으로 증가하는 현상을 보였으나 초고압처리 압력이 높을수록, 감마선 조사강도가 높을수록 유의적으로 현저히 낮은 증가율을 보였다. TBA값은 모든 시료에서 시간이 경과함에 따라 증가량의 차이는 있으나 증가하는 경향을 보였으며, 초고압 처리하지 않은 경우 초기 0.6 mg/g 수준에서 20일 저장 후 4.2 mg/g 수준으로 높은 증가율을 보였으며, 600 MPa 처리구와 30 KGy 처리구의 경우 각각 1.2mg/g과 1.5 mg/g 수준으로 현저하게 낮은 값을 보였다. 초고압처리에 의한 호기성 생균수 감소효과는 다소 낮은 편이었으며 10 kGy 이상의 방사선 조사에 의해 효과적으로 미생물 수를 감소시켰다. 특히 30 kGy 처리구의 경우 20일 동안 저장 후에도 검출되지 않아 멸균효과를 얻을 수 있었다. 고추장 굴비 대중화를 위해서 진공포장이 기본적으로 요구되며, 초고압처리 방법은 단기적인 유통기한 연장효과를 기대할 수 있으며 장기적인 효과를 위해서는 감마선 조사가 적합할 것으로 판단된다.

• 유공압시스템학회논문집
• /
• 제7권3호
• /
• pp.7-12
• /
• 2010

In the case of hydraulic piston motor, hydrostatic bearing is designed to be adapted the hydrostatic bearing for the relative lubrication in the structural design. It's available to make it highly efficient and that's why it's widely used. The thing which largely influence the high pressure, the high efficiency, and the life is the hydrostatic bearing between a shoe and a swash plate. In this study, with the most general "hydrostatic bearing shoe" that has one recess as the subject of this research, I designed and made the 4 kind of piston shoe that have different orifice diameter each other, and studied the features of the hydrostatic bearing by observing the change of the leakage flow rate, the torque and the volumetric efficiency through experiments on the changes of the pressure & the speed of the revolution. As a result, the bigger diameter of the orifice, the less torque. And with an increase of the orifice diameter under the high pressure, the leakage flow rate decreased remarkably. Also it was observed the leakage flow rate increased linearly according to the increase of the supply pressure.

• 한국식품과학회지
• /
• 제27권6호
• /
• pp.991-996
• /
• 1995

비열처리공법 중 하나로 새롭게 주목받고 있는 초고압처리를 신선초 녹즙에 적용하여 미생물의 살균정도 및 갈변효소의 불활성화정도를 살펴보았다. 실험에는 $3800\;kg_f/cm^2{\sim}6700\;kg_f/cm^2$ 범위의 압력에서 $3{\sim}17\;min$동안 처리하였으며 반응표면분석법(RSM)을 이용하여 미생물 및 효소 불활성화의 최적조건을 구하고자 하였다. 반응표면분석결과 $5700\;kg_f/cm^2$ (558.6 MPa)에서 7.16 min 처리할 때 3.44 log cycles의 총균수 감소효과를 얻을 수 있을 것으로 예상되었다. 대장균의 경우, 모든 처리 조건에서 완전살균이 가능하였다. Peroxidase나 PPO와 같은 갈색화효소는 초고압처리에 의해서 쉽게 불활성화 되지 않았으며, 미생물이나 효소의 불활성화는 처리시간보다는 압력에 더욱 의존함을 알 수 있었다.

• KSBB Journal
• /
• 제23권5호
• /
• pp.362-368
• /
• 2008

본고에서는 초고압 시스템 (High hydrostatic pressure (HHP))의 특성, 종류, 응용을 예로 들어 설명하였다. 초고압 기술은 식품의 살균, 식품 보존기간연장, 유효성분의 추출 등에 선택적으로 적합하게 적용하여 생물산업공정에 효율적으로 응용 할 수 있다. 초고압 시스템을 효율적으로 적용하기 위한 최적조건을 선정하는 것은 많은 조업 변수에 대한 고려를 해야 하는 힘든 작업이다. 따라서 하드웨어에 대한 기초 실험과 예비 생산을 통하여 공정에 대한 모사를 검증하고 생산 효율을 증가시킬 수 있다. 또한 초고압 시스템의 중요성이 증가함에 따라 고성능 및 사용이 더욱 편리한 시스템이 나타날 것이며, 많은 영역의 바이오산업에서 필수적으로 이용될 것이다.

• 생약학회지
• /
• 제44권1호
• /
• pp.41-46
• /
• 2013

Alzheimer's disease (AD), most common form of dementia is characterized that memory deficit and loss of cognitive function. The Codonopsis lanceolata (C.lanceolata) was treated by high hydrostatic pressure process and fermentation. This study was evaluated cognitive enhancing effect C.lanceolata extract by high hydrostatic pressure process and fermentation and compared with common C.lanceolata extract using Morris water maze and passive avoidance test. And their neuroprotective effect on glutamate induced oxidative stress in HT22 cell was investigated by MTT assay. High hydrostatic pressure process and fermented C.lanceolata extract (HFCE) and common C.lanceolata extract (CCE) (100 and 300 mg/kg) were administered to mice. Results showed HFCE enhanced cognitive function than CCE as shown by decrease in escape latency time. HFCE increased the latency time of the passive avoidance test compared to CCE. Furthermore, HFCE showed significant neuroprotective effect against glutamate cytotoxicity in HT22 cells. These results indicate that high hydrostatic pressure process and fermented more improve spatial cognitive ability of C. laanceolata.

• Asian-Australasian Journal of Animal Sciences
• /
• 제13권9호
• /
• pp.1323-1328
• /
• 2000

Bovine colostrum, which contains a large quantity of immunoglobulins, is indispensable for newborn animals. The establishment of a new procedure for preserving colostrum without losing the immunological activity is significant. We examined the effect of high hydrostatic pressure treatment (100~500 MPa) on the preservability and the immunochemical activity of bovine colostrum. When high hydrostatic pressure treatment was 300 MPa or more, the increase of the total viable count, coliforms and psychrotrophic gram-negative bacteria was suppressed effectively. In particular, the number of coliforms in colostrum treated at 300 MPa or more hardly increased for 35 days at $4{^{\circ}C}$. At 400 MPa or more, both gelling of the colostrum and denaturation of immunoglobulins were observed. However, if the pressure was 300 MPa, immunoglobulins were scarcely influenced and the neutralizing titers against the bovine coronavirus did not decrease. Therefore, it was suggested that 300 MPa was the best pressure for good preservability of colostrum without reducing the immunochemical response.

• 한국생산제조학회지
• /
• 제20권1호
• /
• pp.96-100
• /
• 2011

The hydrostatic bearings have a relatively small run-out comparing to its shape error by fluid film effect in hydrostatic state as like pneumatic bearing and have a high stiffness, load capacity and damping characteristics. As there is no maintenance and semipermanent in these bearing type, it has been usually adopted as main spindle bearing for grinding machine. In this thesis, to develop hydrostatic bearing for high speed spindle, the cooler setting temperature, bearing clearance and nozzle pressure of belt-driven hydrostatic bearing are investigated. The bearing temperature is decreased, as the cooler setting temperature is lower, nozzle pressure is higher and bearing clearance is wider. The front temperature of bearing is nearly $8^{\circ}C$ higher than the rear one up to 13,000 rpm of spindle revolution. The thermal deflection of X-axis is ${\pm}16\;{\mu}m$ in range of 12,000 rpm-13,000 rpm. Therefore, it is conformed that the built-in motor hydrostatic bearing can be used to high speed spindle.

• The International Journal of Costume Culture
• /
• 제4권3호
• /
• pp.241-248
• /
• 2001

Re water resistance of shell fabrics intended for we in outdoor apparel was measured using three different standard test methods, ASTM D 751, hydrostatic resistance, procedure A(Mullen test -- with and without a fabric support) and Procedure B (Hydrostatic head test). A database of information on their water resistance performance was created. The data collected with different methods were correlated and the advantages and disadvantages of each method were compared. The Mullen test with a support appears to give higher and more favorable water resistance values on shell fabrics preventing fabric rupture during the test. The hydrostatic head test gave lower hydrostatic pressure values than those measured on the two Mullen tests. The Mullen test is recommended for testing the water resistance of fabrics that high a relatively high water resistance because the Mullen tester applies a wide range of pressure. The hydrostatic head test is recommended for testing the fabrics that have relatively low water resistance. The area of the fabric sample that is in contact with the water is smaller in the Mullen test, so higher pressure levels can be reached and more samples should probably be tested to get a representative value for each fabric types. Furthermore, the hydrostatic head test was deemed more repeatable than the Mullen tests in his study.

• 한국공작기계학회논문집
• /
• 제11권3호
• /
• pp.33-38
• /
• 2002

This paper deals with pressure ripple attenuation far separated-type Hydrostatic Transmission (HST) consisting ova variable axial piston pump connected in an open loop to a fried displacement axial piston motor. Pressure ripples in HST is major source of vibration which can lead to fatigue failure of components and cause noise. In order to reduce the pressure ripple, an annular tube tripe hydraulic filter is proposed to attenuate pressure ripples with the high frequencies components to achieve better noise reduction in HST. The basic principle of a hydraulic filter is allied to propagation of pressure wave, reflection, absorption in cross section of discontinuity and resonance in the hydraulic pipeline. It is experimentally shown that the hydraulic filter attenuates about 30∼40dB of pressure ripple with high frequencies. These results will assist in modeling and design of noise reduction in hydraulic control systems, and provide a means of designing a quieter HST.

• 대한조선학회논문집
• /
• 제53권2호
• /
• pp.144-153
• /
• 2016

This paper aims to demonstrate the design, structure analysis, and hydrostatic pressure test of the cylinder used in 2000m water depth. The cylinder was designed in accordance with ASME pressure vessel design rule. The 1.5 times safety factor required by the general rule was applied to the design of the cylinder, because ASME rule is so excessive that it is not proper to apply to the hydrostatic pressure test. The finite element analysis was conducted for the cylinder. The cylinder was produced according to the design. The hydrostatic pressure test was conducted at the hyperbaric chamber in KRISO. The results of finite element analysis(FEM) and those of the hydrostatic pressure test were almost the same, which showed that the design was exact and reliable.