• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1996년도 창립기념 전력전자학술발표회 논문집
• /
• pp.39-42
• /
• 1996

This paper proposes a novel Auxiliary Resonant Commutated Pole Inverter (ARCPI) topology. The conventional ARCPIs make the hard switching at turn-off likewise the conventional PWM inverters. Therefore, turn-off switching losses may be so serious and can be so much considerable in high power level. The proposed ARCPI can solve this problem with high frequency transformers, switches, and capacitors. All the switches in the expanded auxiliary circuit achieves the soft switching and operates only during the commutating intervals. The characteristics and the analysis for each operation mode are described in detail and the validity is verified by the simulations and the experimental results.

• 조명전기설비학회논문지
• /
• 제26권3호
• /
• pp.24-30
• /
• 2012

A proposed the electrical fan heater using induction heating is innovative system which applied IH(Induction Heating) magnetic induction heating generated from induction-heated metallic package and high-frequency power circuit technique for thermal converse technique. In this occurs not burning, so that the working environment and deterioration of products can be improved. The existing heater that low efficiency by heated resistance or using fossil fuel of coal, diesel, kerosene has problems about burden for high cost price. In this paper are compared efficiency the existing heaters and designed electrical fan heaters using 3[kW]-Class full-bridge resonant inverter. In addition, action analysis and application of system are discussed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.492-494
• /
• 1996

This paper describes a study on the series resonant inverter using the double full-bridge, and the output voltage of the proposed inverter is controlled by phase shift angle of the outputs of two inverters. These control schemes can be reduce the switching loss and EMI, etc, which the inverter is drived by auto following control of output frequency, because it is impossible for switching devices to be always turned on and off at zero voltage or zero current. Theoretical characteristics of the proposed double inverter circuit are compared with Pspice simulation and experimental results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.516-520
• /
• 1991

This paper presents a comparative analysis of two inverter power supply topologies for induction heating and melting applications. The comparison is based on criteria such as resonant condition, component ratings, minimum and maximum operating frequencies, operation under varying load conditions, inverter starting current, and diode reverse recovery time. The voltage source series/parallel resonant inverters are found to offer the best overall performance with respect to converter utilization.

• 조명전기설비학회논문지
• /
• 제20권2호
• /
• pp.16-23
• /
• 2006

본 논문에서는 고역률을 가지고 영전압 스위칭으로 동작되는 새로운 단일 전력단 고주파 공진 인버터 링크형 DC-DC 컨버터 회로에 관하여 기술하고 있다. 제안된 토폴로지는 역률 교정기로써 하프 브리지형 부스트 컨버터와 하프 브리지 고주파 공진 컨버터를 단일 전력단으로 일체화 시켰다. 역률 보상용 부스트 컨버터의 부스트 인덕터 전류를 가변 스위칭 주파수와 일정 듀티비를 가지고 불연속 전류 모드(DCM)로 동작시킴으로써 부가적인 입력 전류제어기 없이 높은 입력 역률을 얻을 수 있다. 또 제안한 토폴로지의 이론해석을 무차원화 파라미터를 도입하여 범용성 있게 하여 회로 설계 전단계에서 필요한 특성값을 도식적으로 표현하다. 첨가해, 제안한 토폴로지의 상용화 가능성과 이론해석의 정당성을 입증하기 위해 스위칭 소자로 Power-MOSFET IRF 740을 제안회로 토폴로지의 스위칭 소자로 채용해 실험 장치를 구성하여 검토를 행하였다. 제안된 컨버터는 향후 통신용 DC/DC 컨버터의 전원장치, 방전등용 진원장치 등의 전원시스템에 유용히 사용될 것으로 사료된다.

• 전력전자학회논문지
• /
• 제4권4호
• /
• pp.311-317
• /
• 1999

본 논문에서는 SEPP-LCC형 부하 공진 고주파 인버터의 한 회로형식을 제안하고, 그 동작원리에 관해서 명확히 하였다. 제안한 인버터는 스위칭 소자 양단에 병렬로 커패시터를 추가함으로써 스위칭 소자의 턴-온과 턴-오프시에 발생하는 스위칭 손실, 노이즈, 스트레스 등을 줄일 수 있다. 범용성 있는 회로해석을 위하여 무차원화 파라미터를 도입하였고, 동작특성 및 평가를 통하여 얻은 특성치를 이용하여 회로를 설계하였다. 또한, 실험을 통하여 이론해석의 정당성을 입증하였다.

• 전기학회논문지
• /
• 제56권3호
• /
• pp.531-537
• /
• 2007

This paper presents a new method for determining L, Cs, and Cp in a series parallel resonant inverter. This inverter is suitable for driving high-intensity discharge (HID) lamps. The operating frequency is selected to avoid acoustic resonances which are governed by the size and shape of the arc tube. L, Cs and Cp, are chosen to satisfy the ignition and steady state requirements of the lamp. Equations are developed to analyze the starting condition and steady state operating condition of the lamp. For the prototype ballast for a 250W Metal Halide Lamp, experimental results are presented in order to validate the proposed method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.1161-1164
• /
• 1992

In this paper demonstrates the possibiity of utilising clamped mode - series resonant converter technology in the high frequency link inverter configuration. Main circuit of the proposed inverter is analyzed through circuit analys and waveform simulation. In control circuit PLL circuit and 8 bit single chip microcontroller is adopted, therefore flexibility and accuracy of control circuit is increased.

• 대한방사선기술학회지:방사선기술과학
• /
• 제24권2호
• /
• pp.5-11
• /
• 2001

Most of X-ray generator had used rectifier type transformer with high tension generator which is supplied in a clinical diagnosis. Because the ripple rate of tube voltage is high, X-ray generating efficiency is very low. In these days, high tension generator for inverter type X-ray generator is being supplied from a broad which uses semi-conductor switching element for the electric power that have a high speed switching ability to solve these problem. But, semi-conductor element with large capacity is used with X-ray tube's large consumption power and diffusion is difficult in the small size hospital because production cost is going up by doing digital control through DSP. Therefore, this paper designed and manufactured CR type voltage divider for feedback control of tube voltage with high frequency resonance type inverter and for high tension transformer with high frequency. It was to make economical diffusion type X-ray generator which has wide output voltage and load extent. It was preyed that the X-ray generator had the stability of X-ray tube's output characteristics.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.90-94
• /
• 2000

A conventional power supply to drive a microwave oven has ferro-resonant transformer and high voltage capacitor(HVC). Though it is simple transformer is bulky heavy and has low-efficiency. To improve this defect a high frequency switching inverter-type power supply has been investigated an developed. in recent years. But because of it's additional circuit and devices inverter-type power supply is more expensive than conventional one. In this paper The design procedure of a novel HVC embedded high frequency transformer is proposed for down-sizing and cost reduction. Also transformer equivalent circuit model is derived by FEM analysis and parameter measurements. And the operation of proposed HVC embedded transformer is verified by simulation and experimental results.