• 한국통신학회논문지
• /
• 제34권11C호
• /
• pp.1076-1084
• /
• 2009

OFDM(Orthogonal Frequency Division Multiplexing) 전송 신호의 PAPR (Peak-to-Average Power Ratio)을 효과적으로 감소시키기 위하여 클리핑 잡음 (Clipping Noise)을 이용한 적응적 톤 삽입 (Adaptive Tone Injection; ATI) 기법을 제안한다. 제안된 ATI 기법은 기존 TI 방법에서의 복잡도 문제를 개선하기 위해, IFFT (Inverse Fast Fourier Transform) 출력 가운데 임계 진폭값 보다 큰 신호들을 클리핑 하는 과정, 클리핑된 신호에 대해 클리핑 잡음을 계산 후 주파수 영역 클리핑 잡음의 심벌 중에서 가장 큰 전력이 할당된 톤을 추출하는 과정, 추출된 톤을 확장된 성상도로 맵핑 후에 부분적으로 IFFT 하는 과정의 총 3단계로 구성된다. 모의실험 결과, 제안된 ATI 기법은 맵핑이 가능한 최적의 톤을 클리핑 잡음을 이용하여 추출함으로써 기존 TI 방법에서와는 달리 본래신호와 동일한 정보를 가지는 등가 신호의 가능한 모든 조합을 필요로 하지 않으며, OFDM PAPR 감소 성능 역시 최적의 TI 방법에 근접함을 보여준다.

• Journal of Electrical Engineering and Technology
• /
• 제7권4호
• /
• pp.589-595
• /
• 2012

When surges and electromagnetic pulses from lightning or power conversion devices are considered, it is desirable to evaluate grounding system performance as grounding impedance. In the case of large-sized grounding electrodes or long counterpoises, the grounding impedance is increased with increasing the frequency of injected current. The grounding impedance is increased by the inductance of grounding electrodes. This paper presents the measured results of frequency-dependent grounding impedance and impedance phase as a function of the length of counterpoises. In order to analyze the frequency-dependent grounding impedance of the counterpoises, the frequency-dependent current dissipation rates were measured and simulated by the distributed parameter circuit model reflecting the frequency-dependent relative resistivity and permittivity of soil. As a result, the ground current dissipation rate is proportional to the soil resistivity near the counterpoises in a low frequency. On the other hand, the ground current dissipation near the injection point is increased as the frequency of injected current increases. Since the high frequency ground current cannot reach the far end of long counterpoise, the grounding impedance of long counterpoise approaches that of the short one in the high frequency. The results obtained from this work could be applied in design of grounding systems.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2008년도 춘계학술대회
• /
• pp.23-29
• /
• 2008

- High Density Plasma Source-CCP-Dual/Triple, RF Frequency Control - Radical/Flux Analysis - Low Pressure Process - Chamber Design (Process gap/Wall gap) - Chamber Temp. Control. - ESC Dielectric Materials - Uniform Gas Injection

• 대한기계학회논문집A
• /
• 제37권12호
• /
• pp.1483-1487
• /
• 2013

물 분사 펌프는 심해 유정의 시추작업 후 유정 내 높은 압력으로 인하여 원유를 1 차 생산하고 이후 유정 내 압력이 낮아져 유정 자체의 압력 만으로 생산이 어려울 때 고압의 해수를 유정에 주입해 회수율을 높이는 해양플랜트에서 사용되는 핵심 기자재이며, 여러 기업에서 개발 중이다. 본 논문은 회전체의 동특성 을 분석하여 베어링 강성에 따른 고유진동수 변화분석, 운전속도 변화에 따른 고유진동수의 변화와 위험속도 분석, 안정성 평가, 불평형 응답을 통하여 변위와 틈새 관계 분석 등의 수학적 해석을 통하여 개발 중의 제품의 신뢰성에 기여하였다.

• Journal of the Optical Society of Korea
• /
• 제14권2호
• /
• pp.137-141
• /
• 2010

We report, for the first time to our knowledge, observation of polarization bistability from 1.55-${\mu}m$ wavelength single-mode VCSELs of a conventional cylinder-shape under control of their driving current, and demonstration of all-optical flip-flop (AOFF) operations based on the bistability with optical set and reset pulse injection at a 50 MHz switching frequency. The injection pulse energy was less than 14 fJ. The average on-off contrast ratio of the flip-flopped signals was about 7 dB. These properties of the VCSELs will be potentially useful for future high-speed all-optical signal processing applications.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제44회 KOSCO SYMPOSIUM 초록집
• /
• pp.101-104
• /
• 2012

In this work, in-cylinder pressure measurements and high-speed direct imaging of the flame were performed in an optically accessible single cylinder diesel engine with premixed charge compression ignition combustion and a narrow injection angle. The results show that the frequency ranges of pressure ringing were 8.35 to 9 kHz and 12..2 to 13.1 kHz. The frequencies of the flame movement were shown as 8.7 kHz and 13 kHz. It was found that there is a direct relationship between the pressure ringing and the flame movement.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.168-171
• /
• 2009

High-frequency induction is an efficient way to heat mold surface by electromagnetic induction in a non-contact procedure. Though the induction heating has an advantage in terms of its rapid-heating capacity on the mold surface, it still has a restriction on mold temperature control due to geometric restriction of an induction coil according to the mold shape. It has been recently applied to the injection molding of thin-walled parts or micro/nano structures. For localized induction heating, an injection mold composed of ferromagnetic material and paramagnetic material is used. The electromagnetic induction concentrates on the ferromagnetic material, from which we can selectively heat for the local mold elements. The present study proposed a localized induction heating method by means of selective use of mold material. The feasibility of the proposed heating method is investigated through the comparison of experimental observations according to the mold material.

• Journal of the Optical Society of Korea
• /
• 제10권2호
• /
• pp.86-90
• /
• 2006

The external feedback effect on the relative intensity noise (RIN) characteristics of blue InAlGaN laser diode has been analyzed taking into account the spontaneous emission noise and the injection current for the high frequency modulation. A Langevin diffusion model was exploited to characterize its relative intensity noise. The simulation parameters were quantitatively evaluated from the optical gain properties of the InAlGaN multiple quantum well active regions by using the multiband Hamiltonian for the strained wurtzite crystals. The extracted parameters were then applied to the rate equations taking into account the external feedback and the high frequency modulation current. The RIN characteristics were investigated to optimize the low frequency laser diode noise characteristics.

• 한국표면공학회지
• /
• 제29권5호
• /
• pp.357-362
• /
• 1996

Several applications of radio-frequency (RF) thermal plasma to film formation are reviewed. Three types of injection plasma processing (IPP) technique are first introduced for the deposition of materials. Those are thermal plasma chemical vapor deposition (CVD), plasma flash evaporation, and plasma spraying. Radio-frequency (RF) plasma and hybrid (combination of RF and direct current(DC)) plasma are next introduced as promising thermal plasma sources in the IPP technique. Experimental data for three kinds of processing are demonstrated mainly based on our recent researches of depositions of functional materials, such as high temperature semiconductor SiC and diamond, ionic conductor $ZrO_2-Y_2O_3$ and high critical temperature superconductor $YBa_2Cu_3O_7-x$. Special emphasis is given to thermal plasma flash evaporation, in which nanometer-scaled clusters generated in plasma flame play important roles as nanometer-scaled clusters as deposition species. A novel epitaxial growth mechanism from the "hot" clusters namely "hot cluster epitaxy (HCE)" is proposed.)" is proposed.osed.

• 대한기계학회논문집B
• /
• 제40권10호
• /
• pp.681-687
• /
• 2016

마이크로 인젝션을 바이오분야에 적용하기 위해 고압생성을 통해 침투하는 방법을 채택하였다. 그러나 고압의 액체를 인젝션 할 경우 그 양을 미세하게 하기 어렵다. 이러한 문제를 해결하기 위해는 고속으로 동작하는 개폐밸브에 의한 방법이 있다. 본 연구에서는 수백 Hz로 동작가능한 압전 액추에이터로 구성된 개폐밸브를 적용하여 실험하였다. 압전밸브를 구동하는 파형을 다양하게 조절하고 노즐의 구조에 의한 영향을 알아보기 위해 5가지 서로 다른 치수의 노즐을 제작하였다. 다양한 노즐과 구동파형 변수를 조절하면서 무엇이 인젝션 볼륨과 인젝션 힘에 큰 영향을 미치는지 확인하였다. 이 실험을 통해, 인젝션 볼륨을 줄이고 인젝션 힘을 증가시키는 방법을 알아냈고 목표치가 있다면 그에 맞는 다양한 값을 결정할 수 있게 되었다.