• 제목/요약/키워드: High frequency components

검색결과 990건 처리시간 0.033초

경보접근 장애요소의 심각도와 심각도 구성요인 간의 관계 (A Study on the Barriers of Researcher's Access to Information)

  • 이은철
    • 한국문헌정보학회지
    • /
    • 제23권
    • /
    • pp.165-205
    • /
    • 1992
  • The purpose of this research is to verify the hypothesis that the serious ness of barriers may have significant relevance to barrier components expressing the extent of barrier, e. g. their frequency of occurrence, effect of the barrier on the acquisition of information and on the research project and trend of the barrier. Major conclusions made in this research are summarized as follows: 1. Barriers that their frequency of occurrence are high, show high seriousness of barriers. This indicates that frequency of barriers affects the seriousness of barriers. 2. Barriers that their effects on the acquisition of information and on the research project are large, show high seriousness of barriers. This indicates that the effect of the barrier on the acquisition of information and on the research project affects the seriousness of barriers. 3. Barriers that their trends are increasing, show high seriousness of barriers. This indicates that the trend of the barrier affects the seriousness of barriers.

  • PDF

가진 주파수성분에 따른 항만구조물의 지진응답특성에 관한 연구 (Earthquake Response Characteristics of a Port Structure According to Exciting Frequency Components of Earthquakes)

  • 김두기;류희룡;서형렬;장성규
    • 한국해안해양공학회지
    • /
    • 제17권1호
    • /
    • pp.41-46
    • /
    • 2005
  • 항만구조물의 유체-구조물-지반 상호작용(FSSI)을 고려한 지진응답해석을 수행하였다. 우리나라 동남해안에 위치한 방파제 구조물을 대상으로 장주기 및 단주기파로 구분된 지진을 비롯하여 최근 우리나라에서 발생한 울진지진에 대한 지진응답특성에 대하여 고찰하였다. FSSI 효과를 고려하기 위하여 유체요소는 평면변형해석에 사용하는 4절점 사변형요소를 수정한 요소를 이용하여 모델링 하였다. 그리고 FSSI해석, 진도법, 부가질량법에 의한 지진응답특성을 비교하였다. 고유치해석을 통하여 방파제의 고유주기를 찾고, 기존의 지진 및 최근 우리나라에서 발생한 지진에 대한 지진응답특성 결과로부터 방파제 구조물이 장주기성분에 대한 영향을 더 많이 받는 것을 확인하였다.

신경회로망을 이용한 ECG 특성점 검출에 관한 연구 (A Study on Detection of Significant point in ECG using Neural Network)

  • 손상윤;정기삼;정성진;이명호
    • 대한의용생체공학회:학술대회논문집
    • /
    • 대한의용생체공학회 1995년도 추계학술대회
    • /
    • pp.109-112
    • /
    • 1995
  • This paper is a study on the detection of the significant point in ECG signal. ECG signal consists of two components; one is high frequency component to be detected and the other is low frequency component to be removed. AR model is appropriate for modelling and removing the low frequency component. AR model coefficients are updated by artificial neural network algorithm. We can remove the background noise(low frequency) by passing through the AR filter. The remaining signals which include high frequency noise are sent to the matched filter to pass only the signal which we want to extract. The template used in matched filter is updated adaptively.

  • PDF

고주파 성분을 고려한 AWGN 제거 알고리즘 (AWGN Removal Algorithm Considering High Frequency Components)

  • 천봉원;김남호
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2018년도 춘계학술대회
    • /
    • pp.481-483
    • /
    • 2018
  • 최근 전자통신장비의 수요가 증가함에 따라 영상 및 신호처리의 중요성이 높아지고 있다. 하지만 디지털 신호에 발생하는 잡음은 송수신 과정에서 다양한 원인으로 발생하며 장비의 신뢰성 저하 및 오작동을 유발하고 있다. 특히 AWGN은 전자장비 대부분에서 발견할 수 있기 때문에 영상 인식, 추출, 분할 등 여러 분야에서 전처리 과정으로서 AWGN 제거가 필수적으로 이루어진다. 본 논문은 고주파 성분을 고려한 AWGN 제거 알고리즘을 제안하였다. 기존 방법들은 고주파 성분이 많은 영상에서 비교적 미흡한 성능을 보였으며, 이를 보완하기 위해 국부 마스크에 차영상을 가감한 필터 알고리즘을 제시하였다. 그리고 제안한 알고리즘의 성능을 입증하기 위해 PSNR 및 확대 영상을 이용하여 기존 방법과 비교하였다.

  • PDF

A Test Study on Interface Dynamics of Current Collection System in High Speed Trains

  • Kim, Jung-Soo;Han, Jae-Hyun
    • International Journal of Railway
    • /
    • 제4권2호
    • /
    • pp.34-41
    • /
    • 2011
  • Using a test run data, the dynamics of the interface between the catenary and pantograph constituting the current collection system in high-speed trains are investigated. The test run signals are analyzed to determine the dynamic parameters critical to the current collection performance. There are found to be frequency components of the pantograph motion that are dependent on train speed as well as components that are stationary such as the resonant mode of the panhead suspension in the pantograph. From contact force measurement using load cell, the mean contact force was found to be stable while the fluctuating component was found to be dependent on the range of the frequency of the pantograph motion taken into account. The finding implies that numerical investigations reported in the literature that are based on lumped element models of the catenary and/or pantograph provide accurate predictions on the mean value but are of limited use in estimating fluctuation of the contact force. It is concluded that simulation studies based on lumped-element models which do not incorporate panhead structural vibration modes is inaccurate at high train speeds.

광 주파수 빗으로부터 단일 광 주파수 성분의 선택적 추출 (Selective Extraction of a Single Optical Frequency Component from an Optical Frequency Comb)

  • 문한섭
    • 한국광학회지
    • /
    • 제34권6호
    • /
    • pp.225-234
    • /
    • 2023
  • 모드 잠금 레이저는 주기성을 가지고 짧은 시간 동안 레이저 출력이 펄스로 동작한다. 그러나 시간-주파수 영역에서 모드 잠금된 펄스 레이저의 펄스 반복률의 주기성은 푸리에 변환으로 일정한 주파수 간격을 가진 광 주파수 빗과 같이 이해된다. 이때 광 주파수 빗의 각 주파수 성분은 연속적으로 발진하는 수십만 개의 단일 주파수 성분을 가진 continuous-wave 레이저들과 같다. 광 주파수 빗은 약 20년 전에 개발되어 세계에서 가장 정밀한 원자 시계의 개발을 가능케 하고 안정된 광 주파수를 정밀하게 전송하는 데에 사용되었으며, 다양한 응용연구로도 발전했다. 본 논문에서는 광 주파수 빗의 단일 주파수 구성 요소를 선택적으로 추출하고, 광 빗의 주파수 구성 요소를 제어하는 연구를 소개한다. 또한 광 주파수 빗의 개념과 원리를 해설함으로써 시간-주파수 도메인에서 빛의 특성을 이해하고, 광 주파수 빗을 활용한 다양한 응용 연구를 개발하는 데 도움을 주고자 한다.

Pulse Width and Pulse Frequency Modulated Soft Commutation Inverter Type AC-DC Power Converter with Lowered Utility 200V AC Grid Side Harmonic Current Components

  • Matsushige T.;Ishitobi M.;Nakaoka M.;Bessyo D.;Yamashita H.;Omori H.;Terai H.
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
    • /
    • pp.484-488
    • /
    • 2001
  • The grid voltage of commercial utility power source hi Japan and USA is 100rms, but in China and European countries, it is 200rms. In recent years, In Japan 200Vrms out putted single phase three wire system begins to be used for high power applications. In 100Vrms utility AC power applications and systems, an active voltage clamped quasi-resonant Inverter circuit topology using IGBTs has been effectively used so far for the consumer microwave oven. In this paper, presented is a half bridge type voltage-clamped high-frequency Inverter type AC-DC converter using which is designed for consumer magnetron drive used as the consumer microwave oven in 200V utility AC power system. This zero voltage soft switching Inverter can use the same power rated switching semiconductor devices and three-winding high frequency transformer as those of the active voltage clamped quasi-resonant Inverter using the IGBTs that has already been used for 100V utility AC power source. The operating performances of the voltage source single ended push pull type Inverter are evaluated and discussed for consumer microwave oven. The harmonic line current components In the utility AC power side of the AC-DC power converter operating at ZVS­PWM strategy reduced and improved on the basis of sine wave like pulse frequency modulation and sine wave like pulse width modulation for the utility AC voltage source.

  • PDF

Late Potential의 검출을 위한 고해상도 심전계의 개발 (Development of a High-Resolution Electrocardiography for the Detection of Late Potentials)

  • 우응제;박승훈
    • 대한의용생체공학회:의공학회지
    • /
    • 제17권4호
    • /
    • pp.449-458
    • /
    • 1996
  • Most of the conventional electrocardiowaphs foil to detect signals other than P-QRS-T due to the limited SNR and bandwidth. High-resolution electrocardiography(HRECG) provides better SNR and wider bandwidth for the detection of micro-potentials with higher frequency components such as vontricular late potentials(LP). We have developed a HRECG using uncorrected XYZ lead for the detection of LPs. The overall gain of the amplifier is 4000 and the bandwidth is 0.5-300Hz without using 60Hz notch filter. Three 16-bit A/D converters sample X, Y, and Z signals simultaneously with a sampling frequency of 2000Hz. Sampled data are transmitted to a PC via a DMA-controlled, optically-coupled serial communication channel. In order to further reduce the noise, we implemented a signal averaging algorithm that averaged many instances of aligned beats. The beat alignment was carried out through the use of a template matching technique that finds a location maximizing cross-correlation with a given beat tem- plate. Beat alignment error was reduced to $\pm$0.25ms. FIR high-pass filter with cut-off frequency of 40Hz was applied to remove the low frequency components of the averaged X, Y, and Z signals. QRS onset and end point were determined from the vector magnitude of the sigrlaIL and some parameters needed to detect the existence of LP were estimated. The entire system was designed for the easy application of the future research topics including the optimal lead system, filter design, new parameter extraction, etc. In the developed HRECG, without signal averaging, the noise level was less than 5$\mu$V$_rms RTI$. With signal averaging of at least 100 beats, the noise level was reduced to 0.5$\mu$V$_rms RTI$, which is low enough to detect LPs. The developed HRECG will provide a new advanced functionality to interpretive ECG analyzers.

  • PDF

DCT 부호화된 영상에서 계단함수모형에 의한 구획잡음의 제거방법 (Blocky artifacts reduction by step-function modeling in DCT coded images)

  • 양정훈;최혁;김태정
    • 한국통신학회논문지
    • /
    • 제23권7호
    • /
    • pp.1860-1868
    • /
    • 1998
  • 이 논문에서는 DCT를 사용하여 부호화된 영상으로부터 구획잡읍을 제거하는 간단한 알고리즘을 제안한다. 구획 잡음은 구획경계를 중심으로 반대칭의 형태로 나타나므로, 이 논문에서는 DCT 기저들을 이용한 1차원 반대칭 함수로서 구획잡음을 모형화한다. 제안된 잡음모형의 주파수 특성으로부터, 잡음모형의 고주파성분들을 계단함수에 의한 고주파 성분으로 근사한다. 제안된 알고리즘은 $N\;{\times}\;N$ 구획별로 부호화된 영상에 대해 2N차 DCT영역에서 계단 함수에 의한 고주파 성분들을 제거하는 것이다. 또한 이 알고리즘이 공간영역에서 적은 계산량으로 간단히 수행될 수 있음을 보였다. JPEG 알고리즘을 사용하여 부호화된 영상에 대한 실험을 통하여 제안된 방법이 주관적, 객관적으로 우수한 화질을 보임을 알 수 있다.

  • PDF

Thermal Analysis of a High Speed Induction Motor Considering Harmonic Loss Distribution

  • Duong, Minh-Trung;Chun, Yon-Do;Park, Byoung-Gun;Kim, Dong-Jun;Choi, Jae-Hak;Han, Pil-Wan
    • Journal of Electrical Engineering and Technology
    • /
    • 제12권4호
    • /
    • pp.1503-1510
    • /
    • 2017
  • In this paper, a thermal analysis of a high speed induction motor with a PWM voltage source was performed by considering harmonic loss components. The electromagnetic analysis of the high speed induction motor was conducted using the time-varying finite element method, and its thermal characteristics were carried out using the lump-circuit method. Harmonic losses from tests in the high frequency region were divided into core loss and conductor loss components using various ratios, in order to determine the loss distributions for the thermal analysis. The results from both the calculations and experiment were validated using a high speed induction motor prototype operating at 20,000rpm.