• 전자공학회논문지
• /
• 제50권8호
• /
• pp.15-20
• /
• 2013

본 논문에서는 UHF (ultra high frequency) 대역에서 협대역 통신 시스템을 설계할 경우 필연적으로 겪게 되는 주파수 옵셋 (offset)의 영향을 감쇄시킬 수 있는 dual-band FSK (frequency shift keying) 변조 방식을 제안한다. 협대역 통신 시스템의 경우 광대역 통신 시스템에 비하여 주파수 옵셋에 의한 성능 열화가 상대적으로 큰 단점이 있으며 이로 인하여 버스트 모드 (burst mode)로 동작하는 협대역 통신 시스템의 경우 신호 검출 및 초기 동기 획득이 용이치 않은 문제가 있다. 본 논문에서 제안하는 dual-band FSK 변복조 방식은 버스트 모드 협대역 통신 시스템에서 초기 주파수 옵셋이 큰 경우에도 안정적으로 동작할 뿐만 아니라 주파수 다이버시티 (frequency diversity)를 얻을 수 있어 통신 시스템의 높은 신뢰도가 요구되는 긴급 통신망 설계 등에 활용될 수 있다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2002년도 춘계종합학술대회
• /
• pp.523-526
• /
• 2002

This paper presents the simulation of Au / $Ba_{x}$S $r_{1-x}$ Ti $O_3$(BSTO) / Magnesium oxide (MgO) multi-layered and electrically tunable band-pass filters (BPFs) by using high frequency structure simulator (HFSS). This model is a two-pole microstrip edge coupled filter. The filter was designed fur a center frequency about 5.8 GHz. The tunabillity of the filter is achieved using the nonlinear dc electric-field dependence on the relative dielectric constant of BSTO frroelectric thin film. This work seems very promising for future wireless communication systems....

• Journal of Advanced Marine Engineering and Technology
• /
• 제36권1호
• /
• pp.166-171
• /
• 2012

본 논문에서는 가시광 LED를 이용한 근거리 수중 광무선 통신 기술을 제안하였다. 수중 통신을 위한 기존 음향 시스템의 대안으로 부상하는 가시광 LED 통신은 고품질의 높은 통신 속도를 보장한다. 수중에서 근거리 통신을 위하여 주파수 변조 방식을 적용한 광 무선 오디오 시스템을 개발하였으며 CD4046B 위상잠김루프를 이용하여 주파수 변조와 복조 회로 부분을 구현하였다. 수조내에서 송신단과 수신단을 30 cm 떨어뜨린 후 100 kHz의 변조 중심 주파수에서 오디오 신호를 전송하여 성공적으로 수신됨을 확인하였다.

• ETRI Journal
• /
• 제37권6호
• /
• pp.1055-1064
• /
• 2015

We demonstrate a next-generation high-capacity mobile fronthaul based on radio over fiber (RoF) technology, which links between a digital unit and a radio unit supporting two frequency assignments and $2{\times}2$ multiple input, multiple output antennas. To confirm the technical feasibility of a mobile fronthaul, we experimentally investigate its down- and uplink end-to-end performances including the optical and radio frequency (RF) signal path. Frequency-dependent performance deviations, error vector magnitude variations, overall system performance variations caused by optical to electrical conversion, and intermediate frequency to RF conversions are examined. Experimental verifications on multiple LTE uplink signals are performed for the first time. We also demonstrate several commercial mobile Internet services, YouTube video streaming, and file transfers using off-the-shelf mobile devices, through a mobile fronthaul based on RoF.

• IEIE Transactions on Smart Processing and Computing
• /
• 제4권1호
• /
• pp.44-50
• /
• 2015

This paper presents a high speed synchronous single inductor dual output boost converter using Type-III compensation for power management in smart devices. Maintaining multiple outputs from a single inductor is becoming very important because of inductor the sizes. The uses of high switching frequency, inductor and capacitor sizes are reduced. Owing to synchronous rectification this kind of converter is suitable for SoC. The phase is controlled in time sharing manner for each output. The controller used here is Type-III, which ensures quick settling time and high stability. The outputs are stable within $58{\mu}s$. The simulation results show that the proposed scheme achieves a better overall performance. The input voltage is 1.8V, switching frequency is 5MHz, and the inductor used is 600nH. The output voltages and powers are 2.6V& 3.3V and 147mW &, 230mW respectively.

• Journal of electromagnetic engineering and science
• /
• 제16권3호
• /
• pp.164-168
• /
• 2016

A dual-band through-the-wall imaging radar receiver for a frequency-modulated continuous-wave radar system was designed and fabricated. The operating frequency bands of the receiver are S-band (2-4 GHz) and X-band (8-12 GHz). If the target is behind a wall, wall-reflected waves are rejected by a reconfigurable $G_m-C$ high-pass filter. The filter is designed using a high-order admittance synthesis method, and consists of transconductor circuits and capacitors. The cutoff frequency of the filter can be tuned by changing the reference current. The receiver system is fabricated on a printed circuit board using commercial devices. Measurements show 44.3 dB gain and 3.7 dB noise figure for the S-band input, and 58 dB gain and 3.02 dB noise figure for the X-band input. The cutoff frequency of the filter can be tuned from 0.7 MHz to 2.4 MHz.

• 반도체디스플레이기술학회지
• /
• 제9권2호
• /
• pp.7-10
• /
• 2010

In this paper, we design a modem SoC (System on Chip) for low power consumption and high speed wireless communications. Among various schemes of high speed communications, an MB-OFDM (Multi Band-Orthogonal Frequency Division Multiplexing) UWB (Ultra-Wide-Band) chip is designed. The MB-OFDM uses wide-band frequency to provide high speed data rate. Additionally, the system imposes no interference to other services. The 90nm CMOS (Complementary Metal-Oxide Semiconductor) technology is used for the SoC design. Especially, power management mode is implemented to reduce the power consumption.

• 방송공학회논문지
• /
• 제17권3호
• /
• pp.459-470
• /
• 2012

본 논문은 영상 보간법을 이용하여 저해상도 깊이맵을 고해상도 깊이맵으로 변환하는 방법을 제안한다. 현재의 카메라 센서는 고해상도 색상 영상을 제공하는데 반해, 깊이 측정 장치는 저해상도의 깊이맵을 주로 제공한다. 본 논문은 기존의 양선형 보간법, 고등차수 보간법, 양측 보간법을 바탕으로 깊이맵에서 추출한 고주파 성분을 적용하여 깊이맵의 선명도를 증가한다. 이를 위해, 제안 방법은 고주파 성분 추출 단계, 고주파 성분 적용 단계, 및 영상 보간 단계를 거친다. 실험에서는 다양한 깊이맵 데이터에 제안 방법을 적용하였는데, 성능검증 방법으로 선명도(sharpness degree)와 블러 메트릭 (blur metric)의 두 객관적 측정을 통해서 제안 방법이 기존 방법에 비해 선명도가 약 2배 정도 증가했음을 보여준다. 또한 블러 메트릭은 평균 14%가 감소되었다.

• Current Optics and Photonics
• /
• 제2권1호
• /
• pp.53-58
• /
• 2018

A novel X-band high speed frequency sweep signal generator based on a tunable optoelectronic oscillator (OEO) incorporating a frequency-swept laser is presented and the theoretical fundamentals of the design are explained. A prototype of the generator with tuning range from 8.8552 GHz to 10.3992 GHz and a fine step about 8 MHz is achieved. The generated radiofrequency signal with a single sideband (SSB) phase noise lower than -100 dBc/Hz@10KHz is experimentally demonstrated within the whole tunable range, without any narrow RF band-pass filters in the loop. And the tuning speed of the frequency sweep signal generator can reach to over 1 GHz/s benefiting from applying a novel dispersion compensation modular instead of several tens of kilometers of optical fiber delay line in the system.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2007년도 학술대회
• /
• pp.366-370
• /
• 2007

This paper discusses a most suitable wireless communications system for subway trains on condition that a geo-spatial video system is implemented in subway trains. Geo-spatial video system for subway trains refers to the device that can transfers the images captured by cameras within a subway station building or in and around a subway track to on coming trains wirelessly, which allows the operator in operating room to monitor the state of a platform and a subway track, the flow of passengers, and the condition of passengers getting on and off. To minimize the problem, secure civil safety and prevent accidents and calamity from occurring, a geo-spatial video system for subway trains has been increasingly introduced. The wireless communications systems for GVS for subway trains involve HF(High Frequency), IR(Infra Red), M/W(Micro Wave), wireless LAN approaches. Each has its own strengths/weaknesses, and different vendors have different technology.