• Journal of the Korea Society of Computer and Information
• /
• v.23 no.1
• /
• pp.1-7
• /
• 2018

The Korean Air Force FA-50 aircraft currently operating in the Air Force is using Ultra High Frequency (UHF) frequency communications for navigation communications with ground control stations or other aircraft. The pilot communicates by changing frequency at any time during flight, and performs communication by directly inputting from the Integrated Up-Front Controller installed in the cockpit. The frequency is designated as secret, and the pilot receives the task with the frequency channel number (001~xxx) and finds the frequency of the channel in the list of 4,000 frequency channels and inputs it manually. This reduces the safety and convenience of pilots' operations and exposes them to hazards that may occur especially during night flight missions. In this paper, we propose a function to embed the frequency corresponding to the frequency channel list in IMDC, the aircraft mission computer, and to automatically change the frequency when the pilot only inputs the channel number.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.2
• /
• pp.254-262
• /
• 2016

With the increased demand for automotive radar systems, mutual interference between vehicles has become a crucial issue that must be resolved to ensure better automotive safety. Mutual interference between frequency modulated continuous waveform (FMCW) radar system appears in the form of increased noise levels in the frequency domain and results in a failure to separate the target object from interferers. The traditional fast fourier transform (FFT) algorithm, which is used to estimate the beat frequency, is vulnerable in interference-limited automotive radar environments. In order to overcome this drawback, we propose a high-resolution frequency estimation technique for use in interference environments. To verify the performance of the proposed algorithms, a 77GHz FMCW radar system is considered. The proposed method employs a high-resolution algorithm, specially the multiple signal classification and estimation of signal parameters via rotational invariance techniques, which are able to estimate beat frequency accurately.

• ETRI Journal
• /
• v.29 no.5
• /
• pp.569-595
• /
• 2007

Particularly in wireless communications, link errors severely affect the quality of the services due to the high error probability and the specific error characteristics (burst errors) in the radio access part of the network. In this work, we show that thorough analysis and appropriate modeling of radio-link error behavior are essential to evaluate and optimize higher layer protocols and services. They are also the basis for finding network-aware cross-layer processing algorithms which are capable of exploiting the specific properties of the link error statistics, such as predictability. This document presents the analysis of the radio link errors based on measurements in live Universal Mobile Telecommunication System (UMTS) radio access networks as well as new link error models originating from that analysis. It is shown that the knowledge of the specific link error characteristics leads to significant improvements in the quality of streamed video by applying the proposed novel network- and content-aware cross-layer scheduling algorithms. Although based on live UMTS network experience, many of the conclusions in this work are of general validity and are not limited to UMTS only.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.405-409
• /
• 2004

We chose the Kushiro wetland in Hokkaido, Japan, as a test site to monitor wetland areas. Synthetic aperture radar (SAR) can carry out continuous observation in any weather conditions, and can therefore be used to observe high humidity areas such as wetlands. We applied multi-parameter SAR data (dual-frequency, multi-polarization, and multi-incidence angle) to monitoring the wetland forest. To find the optimum incidence angle and polarization for monitoring the wetland biomass, a simple backscattering model of wetland vegetation was developed and applied to estimate backscattering coefficients for different biomass and surface conditions.

• ETRI Journal
• /
• v.43 no.2
• /
• pp.209-220
• /
• 2021

The filtered orthogonal frequency division multiplexing (F-OFDM) system has been recommended as a waveform candidate for fifth-generation (5G) communications. The suppression of out-of-band emission (OOBE) and asynchronous transmission are the distinctive features of the filtering-based waveform frameworks. Meanwhile, the high peak-to-average power ratio (PAPR) is still a challenge for the new waveform candidates. Partial transmit sequence (PTS) is an effective technique for mitigating the trend of high PAPR in multicarrier systems. In this study, the PTS technique is employed to reduce the high PAPR value of an F-OFDM system. Then, this system is compared with the OFDM system. In addition, the other related parameters such as frequency localization, bit error rate (BER), and computational complexity are evaluated and analyzed for both systems with and without PTS. The simulation results indicate that the F-OFDM based on PTS achieves higher levels of PAPR, BER, and OOBE performances compared with OFDM. Moreover, the BER performance of F-OFDM is uninfluenced by the use of the PTS technique.

• Journal of Communications and Networks
• /
• v.9 no.1
• /
• pp.34-42
• /
• 2007

Orthogonal frequency division multiplexing (OFDM) combined with time division multiplexing (TDM), in this paper called OFDM/TDM, can overcome the high peak-to-average-power ratio (PAPR) problem of the conventional OFDM and improve the robustness against long time delays. In this paper, the bit error rate (BER) performance of OFDM/FDM in a frequency-selective Rayleigh fading. channel is evaluated by computer simulation. It is shown that the use of frequency-domain equalization based on minimum mean square error criterion (MMSE-FDE) can significantly improve the BER performance, compared to the conventional OFDM, by exploiting the channel frequency-selectivity while reducing the PAPR or improving the robustness against long time delays. It is also shown that the performance of OFDM/FDM designed to reduce the PAPR can bridge the conventional OFDM and single-carrier (SC) transmission by changing the design parameter.

• Journal of electromagnetic engineering and science
• /
• v.8 no.3
• /
• pp.119-128
• /
• 2008

In this paper, we propose a developing approach of 600 W super high frequency(SHF) traveling wave tube amplifier (TWTA) for communications. Also, we make a TWTA called the experimental-TWTA(ETWTA), which uses a cathode ripple reduction technique to improve RF performance. After implementation, we discuss, and compare it with some other TWTAs. Its RF performance is better than that of other TWTAs. Therefore, this methodology can be used to develop the high power SHF TWTA for communications.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.115-118
• /
• 2007

Luminous efficacy of 6.0 lm/W has been realized by introducing a spatial positive column discharge together with delayed D pulses, shared sustain pulse voltage, and low sustain frequency drive. Also a high speed addressing of $0.25{\mu}s$ was achieved. The luminance was $157cd/m^2$, which is high enough for a 260-in. FHD display.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.1
• /
• pp.10-19
• /
• 2018

In this paper, a new high-frequency equivalent circuit model of printed spiral coils (PSCs) for radio-frequency interference (RFI) measurement has been proposed. To achieve high-frequency modeling, the proposed model consists of distributed components designed based on the design parameters of the PSCs. In addition, an analytic model for PSCs based on T-pi conversion has been proposed. To investigate the feasibility of the proposed model for RFI measurement, the transfer function between a microstrip line and a PSC has been extracted by combining the proposed model and mutual inductance. The self-impedances of the proposed model and the transfer function have been successfully validated using three-dimensional field simulation and measurements, revealing noticeable correlations up to a frequency of 6 GHz. The proposed model can be employed for high-frequency probe design and RFI noise estimation in the gigahertz range wireless communication bands.

• ETRI Journal
• /
• v.35 no.3
• /
• pp.397-405
• /
• 2013

In this paper, two sets of spectrally efficient ultra-wideband (UWB) pulses using zinc and frequency-domain Walsh basis functions are proposed. These signals comply with the Federal Communications Commission (FCC) regulations for UWB indoor communications within the stipulated bandwidth of 3.1 GHz to 10.6 GHz. They also demonstrate high energy spectral efficiency by conforming more closely to the FCC mask than other UWB signals described in the literature. The performance of these pulses under various modulation techniques is discussed in this paper, and the proposed pulses are compared with Gaussian monocycles in terms of spectral efficiency, autocorrelation, crosscorrelation, and bit error rate performance.