• 한국추진공학회지
• /
• 제6권2호
• /
• pp.65-74
• /
• 2002

전압력 회복율을 최대로 하기 위한 IRR형 램젯 공기 흡입구 초음속 확산부의 최적형상 설계를 수행하였다. 질량유량을 제약조건으로 고려하고 외부램프에서의 두 번째 경사충격파와 카울립 형상, 그리고 흡입구 목의 단면적을 설계변수로 선택하였다. 효율적인 최적화를 위해 설계변수 변환을 통한 개선된 반응면 기법을 사용하였으며 설계반복을 통해 높은 신뢰도의 반응면을 구성할 수 있었다. 최적화 기법으로 유전자 알고리즘을 사용하였으며, 이차원 Euler Code를 사용하여 공력해석을 수행하였다. 배압조건의 적용을 위해 흡입구 목 뒤로 가상의 노즐을 장착하였고 총 20회의 계산으로 종말충격파 이후의 전압력 회복율이 기준형상에 비하여 14% 향상된 초음속 확산부 최적형상을 설계할 수 있었다.

• Membrane and Water Treatment
• /
• 제6권1호
• /
• pp.15-26
• /
• 2015

The compact structure and high-quality effluent of membrane bioreactors make them well-suited for decentralized greywater reclamation. However, the occurrence of membrane fouling continues to limit their effectiveness. To address this concern, a unique membrane module configuration was developed for use in a decentralized greywater treatment system. The module featured local aeration directly below a series of inclined membrane bundles, giving the overall module a twisted appearance compared to a module with vertically orientated fibres. The intent of this design was to increase the frequency and intensity of collisions between rising air bubbles and the membrane surface. Material related to the construction of custom-fit modules is rarely communicated. Therefore, detailed design and assembly procedures were provided in this paper. The twisted module was compared to two commercially available modules with diverse specifications in order to assess the relative performance and marketability of the twisted module with respect to existing products. Contaminant removal efficiencies were determined in terms of biochemical oxygen demand, chemical oxygen demand, ammonia, total nitrogen, total phosphorus, and turbidity for each module. Membrane fouling was monitored in terms of permeate flux, transmembrane pressure, and membrane resistance. Following 168 h of operation, the twisted module configuration demonstrated competitive performance, indicating good potential for further development and commercialization.

• 천문학회보
• /
• 제36권1호
• /
• pp.35.2-35.2
• /
• 2011

We have investigated a coronal jet near the limb on 2010 June 27 by Hinode/X-Ray Telescope (XRT), EUV Imaging Spectrograph (EIS), SDO/Atmospheric Imaging Assembly (AIA), and STEREO. From EUV (AIA and EIS) and soft X-ray (XRT) images we identify the erupting jet feature in cool and hot temperatures. Using the high temporal and multi wavelength AIA images, we found that the hot jet preceded its associated cool jet and their structures are well consistent with the numerical simulation of the emerging flux-reconnection model. From the spectroscopic analysis, we found that the jet structure changes from blue shift to red one with time, which may indicate the helical structure of the jet. The STEREO observation, which enables us to observe this jet on the disk, shows that there was a dim loop associated with the jet. On the other hand, we found that the structure of its associated active region seen in STEREO is similar to that in AIA observed 5 days before. Based on this fact, we compared the jet morphology on the limb with the magnectic fields extrapolated from a HMI vector magnetogram of this active region observed on the disk. Interestingly, the comparison shows that the open and closed magnetic field configuration correspond to the jet and the dim loop, respectively, as the Shibata's jet model predicted.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제3B권4호
• /
• pp.179-187
• /
• 2003

In the machine tool industry, direct drive linear motor technology is of increasing interest as a means to achieve high acceleration and to increase reliability. This paper analyzes and compares the characteristics of the tubular linear actuator with the cylindrical Halbach and radial array, respectively. A tubular linear actuator with cylindrical Halbach array, consisting of parallel magnetized arc segments instead of ideal radial and axial magnetized rings, is manufactured. The magnetic field solutions due to the PMs and to the currents are established analytically in terms of vector potential, using the 2-D cylindrical coordinate system. Motor thrust, flux linkage and back emf are then derived. Thrust characteristics according to such design parameters as magnet height and air gap length are also given. The results are validated extensively by comparison with finite element analysis (FEA). Test results such as thrust measurements are also given to confirm the analysis.

• Design & Manufacturing
• /
• 제11권2호
• /
• pp.20-24
• /
• 2017

Recent industrial developments are constantly advancing, and rapid technological development is demanding high technology level in related fields. The need for polishing is increasing even more to improve quality. In order to improve the surface quality, the final finishing process or polishing process is a very important part. Research on super precise polishing method using MR fluid is actively being carried out in domestic and foreign countries. Fine magnetic abrasive grains are aligned in the direction of a magnetic force line formed by a magnetic field and serve as a brush to polish a metal surface. This method has the advantage that the shape of the tool is not fixed and is not affected by the shape of the workpiece or the machining area. We will design the electromagnets for the MR polish polishing system and apply the magnetic field analysis using the magnetic field analysis program (ANSYS). The data obtained through this process suggests an efficient method to increase the magnetic flux density important for polishing. We will investigate the influence of the Al6061-T6 specimen on the surface of the MR polishing machine based on the optimized design.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 1998년도 춘계종합학술대회
• /
• pp.371-376
• /
• 1998

This paper describes an approach to a speed estimation method to remove speed sensor of underwater robot's AC drive systems. AC motors have been widely used in the field of underwater robot's manipulator or propulsion system. Most of these AC motors for underwater use have usually filled oil to compensate the high pressure in deep-sea operation, where a resolver is adopted to feed back the speed of rotor But this kind of speed feedback devices gives rise to some defects arising from their mechanical complexity and numerous signal lines; a resolver needs 6 or 7 signal lines for proper operation. This paper presents a speed estimation method to improve these problems of induction motor, which is adopted as a prototype of AC motor. The proposed speed estimation method is based on the RFO(rotor flux orientation) vector control method of voltage-fed AC drives. Using the controller of voltage-fed AC drives, it is unnecessary to measure the voltage for the estimation of rotor speed, which reduces the effects of measurement error Numerical simulation is carried out to investigate the validity of the method and the effects of rotors resistance variation.

• 전기학회논문지
• /
• 제64권10호
• /
• pp.1486-1492
• /
• 2015

The following study carried out the characteristic analysis based on the magnet segment of Interior Permanent Magnet Synchronous Motor(IPMSM) for the urban railway vehicles. IPMSM affects the electromagnetic characteristics through the change in magnetic flux based on the rotor structure, and significantly influences the structural features through the change of pressure. Therefore, satisfied by the demanded traction force of the IPMSM, magnet segment derived three different model types. The 1-segment PM model consisted an undivided permanent magnet. The 2-Bridge model consisted a divided permanent magnet with the application of Bridge. The 3-Bridge model consisted additional dividing with one more Bridge applied. The electromagnetic characteristics of the three models were compared and analyzed along with the structural features regarding the scattering of permanent magnet based on strong centrifugal force from the rotation of the rotor at high speed. In conclusion, the final model with electromagnetic characteristics and structural features most suitable of IPMSM for the urban railway vehicles was derived, and the effectiveness was verified through the characteristic experiments after the production of the derived model.

• 상하수도학회지
• /
• 제30권6호
• /
• pp.737-744
• /
• 2016

The investigation of effects on fouling propensity with various viscosity of feed solutions would be better understanding for forward osmosis (FO) performance since the fouling propensity was directly influenced with solution viscosity. Therefore, this study was focused on the FO fouling with model foultants (humic acid, alginate) by altering solution viscosity with change of ionic strength (I.S) and $Ca^{2+}$ concentrations. In the comparison between humic acid and alginate, as expected, the alginate generally caused more severe fouling (almost 35.8 % of flux reduction) based on the solution characteristics (high viscosity) and fouling patterns (coil and gel layer). However, interesting point to note is that the fouling propensity of alginate was more severe even though it was applied with low viscosity of feed conditions (I.S = 20 mM, $Ca^{2+}=1mM$). This might be due to that crossed linked gel layer of alginate on the FO membrane surface could be best formed in the condition of $Ca^{2+}$ presence and higher I.S, and that is more dominant to fouling propensity than the low viscosity of feed solutions.

• Journal of Microbiology and Biotechnology
• /
• 제31권9호
• /
• pp.1305-1310
• /
• 2021

Shikimate is a key high-demand metabolite for synthesizing valuable antiviral drugs, such as the anti-influenza drug, oseltamivir (Tamiflu). Microbial-based strategies for shikimate production have been developed to overcome the unstable and expensive supply of shikimate derived from traditional plant extraction processes. In this study, a microbial cell factory using Corynebacterium glutamicum was designed to overproduce shikimate in a fed-batch culture system. First, the shikimate kinase gene (aroK) responsible for converting shikimate to the next step was disrupted to facilitate the accumulation of shikimate. Several genes encoding the shikimate bypass route, such as dehydroshikimate dehydratase (QsuB), pyruvate kinase (Pyk1), and quinate/shikimate dehydrogenase (QsuD), were disrupted sequentially. An artificial operon containing several shikimate pathway genes, including aroE, aroB, aroF, and aroG were overexpressed to maximize the glucose uptake and intermediate flux. The rationally designed shikimate-overproducing C. glutamicum strain grown in an optimized medium produced approximately 37.3 g/l of shikimate in 7-L fed-batch fermentation. Overall, rational cell factory design and culture process optimization for the microbial-based production of shikimate will play a key role in complementing traditional plant-derived shikimate production processes.

• 한국추진공학회지
• /
• 제22권6호
• /
• pp.37-46
• /
• 2018

초음속 연소기에 대해 연료에 의한 연소기 재생 냉각을 가정하여 재생 냉각 유로 형상 설계를 수행하였다. 준일차원 모델을 사용하여 고온 측 및 저온 측 유동 계산을 수행하였으며 이 과정에서 양쪽 사이의 열전달을 계산하였다. 기준 형상에서 총 열교환량은 10.7 kW, 열유속은 $566kW/m^2$, 열교환기 입출구에서의 연료 온도 변화는 153 K으로 계산되었다. 7개의 열교환기 유로 형상에 대하여 열전달 성능을 비교하였다.