• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1995년도 추계학술대회 논문집
• /
• pp.30-36
• /
• 1995

This paper proposed on the effective cutting conditions of cage motor rotor by turning. If you want to introduce automatic manufacturing system into the cutting process of cage motor rotor, the selections of effective cutting conditions are necessary. The cutting process of cage motor rotor requires the precision and the out of roundness of cage motor rotor. The surface roughness of cutting face. it is very important factor with effect on the magnetic flux density of cage motor rotor. The purpose of this study is to find out the effects of cutting condition. upon adapting this results, we will improve the production rate in the cutting process of cage motor rotor. As a result, the selection of cutting conditions are important factors to production rate. And these are chosen by the investigations of cutting characters and surface roughness. The experimental result, showed that the increase of cutting speed caused the decrease of cutting force and the high surface integrity. The increase of feed rate and increase of depth of cut caused the increase of cutting force and surface roughness. Thus, the effective cutting conditions of cage motor rotor by turing are cutting speed 291m/min, feed rate 0.10mm/rev, depth of cut 0.05mm.

• 한국유체기계학회 논문집
• /
• 제17권2호
• /
• pp.30-34
• /
• 2014

Membrane distillation (MD) is a thermal driven separation process in which separation a hydrophobic membrane is a barrier for the liquid phase, letting the vapor phase pass through the membrane pores. Therefore, a porous and hydrophobic membrane should be used in membrane distillation. MD cannot work if water penetrates into the pores of the membrane (membrane wetting). Accordingly, it is necessary to prevent wetting of MD membranes and to remove water inside the pores of the wetted membranes if possible. In this context, our study aimed to develop methods to recover wetted membranes in MD processes. Poly-vinylidene fluoride (PVDF) membranes were used in this study. A laboratory-scale direct contact MD (DCMD) system was used to examine the effect of operating parameters on wetting. For dewetting the wetted membranes, specific techniques including the use of high temperature air were applied. The performances of the membranes before and after dewetting were compared in terms of flux, salt rejection and liquid entry pressure(LEP). The surface morphology of dewetted membrane was confirmed by scanning electron microscope (SEM).

• 천문학회보
• /
• 제36권2호
• /
• pp.93.2-93.2
• /
• 2011

Japan Aerospace Exploration Agency (JAXA) has measured space environment and its effects on spacecraft and astronaut since 1987. At present, we have operated space environment monitors onboard one GEO spacecraft, one QZO spacecraft, and two LEO spacecrafts. The obtained space environment data has been gathered into the Space Environment and Effects System database (SEES, http://sees.tksc.jaxa.jp/). In this presentation, measurement result of space environment in low earth orbit obtained by the Daichi satellite from 2006 through 2011 is reported as well as recent activities in space environment engineerings in JAXA. The Technical Data Acquisition Equipment (TEDA) on board the Daichi satellite (Advanced Land Observing Satellite: ALOS) had been operated in low earth orbit at 700 km altitude with 98 degree inclination from February 2006 until April 2011. The TEDA consists of the Light Particle Telescope and the Heavy Ion Telescope. The operation period of the Daichi satellite was through the solar-activity minimum period. The space radiation environment around the Daichi satellite had been almost stable. However, large solar flares followed by CMEs sometimes disturbed the space radiation environment in the orbit of the Daichi satellite. In addition, high speed solar wind often flowed and modulated the electron flux in the horn region. On the other hand, a little variation was seen in the SAA region.

• Transactions on Electrical and Electronic Materials
• /
• 제16권4호
• /
• pp.201-205
• /
• 2015

This paper dealt with the condensing technology of an LED light source that uses a parabolic reflector to replace a searchlight equipped with a xenon lamp. A ray-tracing simulation was conducted to analyze the influence of the diameter of the reflector and the size of the light source on light condensing. The combination of a parabolic reflector with a diameter of 620 mm and a focal distance of 220 mm, and a 9 mm multi-chip package (MCP) with a luminous flux of 7,000 lm showed the narrowest beam angle. The luminous intensity at the center was measured at 7.7×10⁶ cd. The distance between the light source and the point where the illuminance was 1 lx was calculated to be 2.8 km. The power consumption of the system was 95 W, which is only 9.5% of that of the 1 kW xenon searchlight, and the beam angle was 1.03°. In a site experiment, it was confirmed that the light ray reflected from the LED searchlight proceeds forward without any diffusion because of the narrow beam angle.

• 멤브레인
• /
• 제12권3호
• /
• pp.143-150
• /
• 2002

전기투석은 이온성 물질을 분리하고 농축하는데 안정하고 효과적인 공정으로 알려져 있다. 그러나 전기투석 공정은 고가의 이온교환막 때문에 실제 공정에 적용하는데 많은 제한을 받아오고 있다. 따라서 전기 투석공정의 운전 전류밀도를 가능한 높게 공급함으로써 이온교환막의 단면적당 flux를 증가시켜 주어야 한다. 그러나 실제 공정의 운전에 있어서 운전 전류밀도는 이온교환막 표면에서의 농도분극 현상으로 제한을 받게 된다. 본 총설에서는 이온교환막을 통한 이온의 이동현상을 설명하고 전류-전압 곡선을 이용한 막특성 분석을 소개하였다. 또한 한계전류밀도 전후의 전류 영역에서 농도분극 현상과 동반하는 전기대류(Electroconvection), 물 분해 현상 등에 대한 최근 연구결과를 정리하였다.

• 상하수도학회지
• /
• 제24권5호
• /
• pp.595-601
• /
• 2010

It is evident that Korea will continue its battle with water shortage and alternative program are being taken into action. One of the main actions is reusing 1,800 tons of effluent of 357 sewage treatment plant located nationwide. Therefore this study supplemented ozone oxidation methods that would increase the efficiency of organic oxidation and coagulation. Through this method, fouling will be controled sufficiently by preventing membrane process in the system for advanced sewage treatment. In this study, ozone-coagulation-microfiltration membrane were used. The final removal efficiency of the pretreated water from the result of the ozone-coagulation were 50% of CODcr, 38% of TP and 11% of TOC respectively. Water quality treatment has decreased about 80% for TP. Ozone-coagulation-microfiltration membrane maintains the high flux while decreasing the number of organic matter and the membrane fouling, and reducing the TP. As a result, in order to reuse the water from the sewage, the ozone-coagulation-microfiltration membrane type must be considered in order to achieve the best efficiency.

• 상하수도학회지
• /
• 제27권3호
• /
• pp.363-371
• /
• 2013

In this study, effect of activated carbon size on flux and fouling of membrane was investigated on activated carbon and membrane hybrid system. The activated carbon was prepared with crushing and screening. The activated carbon was named by A100, B100, A200, B200, A325 and B325 due to size of activated carbon. The permeability for A100, B100, A200 and B200 showed no significant difference. However, the permeability for A325 and B325 was decreased rapidly and was lowed due to increase the concentration of NOM. Main resistance for A100, B100, A200 and B200 was identified as irreversible fouling. However main resistance for A325 and B325 was identified as reversible fouling. The smaller activated carbon adsorbs NOM faster than bigger particles, which can show high permeability at early stage of the operation and then showed faster decrease of permeability at end of the operation.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1995년도 한국우주과학회보 제4권2호
• /
• pp.30-30
• /
• 1995

We present the results of analysis on the X-ray observations of the binary X-ray pulsar Her X-I. made with ASCA/SIS on August 13-14. 1993. An eclipse transition from ingress to egress was fully covered by the observations. The main findings are as follows; (1) a model of power-law plus black-body is required to interpret the entire eclipse spectrum. and the black-body component appears at < 0.7 keV. (2) the power-law continuum which has photon index ${\alpha}\;=\;{0.84^{\;+0.14}}_{\;-0.19}$ is very similar to that of detected by Ginga/LAC (${\alpha}\;=\;0.80\;{\pm}\;0.04$), (3) the calculated eclipse flux of $2^{-10}\;keV.{\;}~{\;}1.8{\pm}10^{-11}{\;}ergs{\;}cm^{-2}s^{-1}$, is consistent with the Ginga observation carried out in the high intensity state ~2.0{\pm}10^{-11}{\;}ergs{\;}cm^{-2}s^{-1}$, (4) there is no significant absorption feature. and an upper limit of the aborption column $NH{\;}\leq{\;}3{\pm}10^{20}\;cm^{-2}$ is determined at the 90% confidence limit. Based on these results, we suggest that extended matter surrounding the binary system should be existed persistently with stable conditions, and scattering of the source continuum by the matter is responsible for the eclipse emission.ission.

• 한국초전도ㆍ저온공학회논문지
• /
• 제16권1호
• /
• pp.32-35
• /
• 2014

Recently, many researches on the system of superconducting power supply and superconducting magnetic energy storage (SMES) using high temperature superconducting (HTS) tapes has been progressed. Those kinds of superconducting devices use the heater trigger switches that have a control delay problem at moments of heating up and cooling down. One way to reduce the time delay is using a different HTS tape at trigger part. For example, HTS tape having lower critical temperature can reduce time delay of heating up and heating down stage for heater trigger operation. This paper deals with resistances joint with different kinds of HTS tapes which have different properties to verify usefulness of the suggested method. Three kinds of commercial HTS tapes with different specifications are selected as samples and two kinds of solders are used for comparison. Joint is performed with temperature and pressure controllable joint machine and the joint characteristics are analyzed under the repeatable conditions.

• 한국자기학회지
• /
• 제27권1호
• /
• pp.35-40
• /
• 2017

기존의 광학현미경을 분해 하여 Kerr 현미경을 구성한 다음, 180도 자벽을 가지는 극박 3 %Si-Fe에 대해 자구모양을 관찰하였다. CCD 카메라로 취득한 한 단 한 장의 디지털 자구모양으로부터 자구영역의 경계선을 고가의 고속 영상처리장치 없이 결정하였다. 자구모양의 경계선 결정 방법은 디지털 자구모양의 픽셀값을 감산, 적분, 최소자승법의 연산을 이용하는 것이다. 이 방법은 많은 디지털 이미지를 연속적으로 취득하여 다중 합산하는 종래의 방식보다는 비용이 적게 든다. 이 연구 결과로부터 3개의 경계선과 0.085[T]의 자속밀도가 구해져 시편의 중심부와 같이 $180^{\circ}$ 자벽 만이 형성되는 영역이라면 이 방법을 적용할 수 있다.