• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 봄 학술논문 발표대회
• /
• pp.55-56
• /
• 2022

Recently, water leak is increasing due to poor compaction or segregation of concrete on external wall. In addition, the flatness quality of the slab is lowered due to the deterioration of the workability of concrete. In this study, the performance of high fluidity concrete of 21MPa using a polycarboxylate-based superplasticizer was evaluated to improve the compaction and quality of the concrete wall.

• 한국구조물진단유지관리공학회 논문집
• /
• 제20권3호
• /
• pp.122-129
• /
• 2016

본 연구에서는 고압송용 고유동콘크리트 개발을 위한 기초적인 연구의 일환으로 펌프압송시 압송관내 콘크리트가 받는 압력을 재현할 수 있는 가압장치를 개발하였다. 이를 통하여 펌프압송할 경우 발생되는 품질변화의 원인 중 압력에 의한 단위수량 감소에 중점을 두어 가압에 따른 콘크리트용 굵은골재의 흡수 특성 및 고유동콘크리트 내부 굵은골재의 흡수 특성을 평가하였으며, 고유동콘크리트의 가압 전 후 압축강도를 평가하였다. 실험결과, 250 bar의 높은 압력이 작용할 경우 부순굵은골재 및 강자갈의 흡수율은 표건 흡수율 이상으로 증가되지 않는 것으로 나타났으며, 경량굵은골재의 흡수율은 표건 흡수율 이상으로 증가되는 것으로 나타났다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2007년도 춘계학술논문 발표대회
• /
• pp.25-28
• /
• 2007

In this study we measured the changes according to time respectively on the basis of 0, 30, 60 and 90 minutes, taking into consideration the decline in fluidity of concrete according to elapsed time to analyze manufacturing capability of batcher plant according to elapsed time of ready-mixed concrete manufactured in batcher plant, and offer basic data for mixture design of ultra-high strength concrete. The proportion of water-binder was 23.55, water content was 160kg/m3, proportion of replacement of crushed sand was 0, 20 and 40% at 3 level, and we applied to the same condition of triaxial component using blast furnace slag powder and silica fume as admixture. And to meet the demand of certain fluidity, we measured respectively on property before and after hardening of ultra-high strength concrete using superplasticizer. As a result of experiment, before hardening of ultra-high strength concrete showed the best fluidity in conditions of crushed sand replacement rates of 20% and superplasticizer composition of 1.95%, but it appeared that fluidity drops as time goes by in the same composition condition. And it appeared that when it comes to hardened, the changes of compression strength according to elapsed time by crushed sand replacement rates were within 1MPa. Therefore, it turned out that the difference of strength according to elapsed time was low and compression strength of 280dys in composition mentioned above appeared highly as 88MPa.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.140-141
• /
• 2018

There are three types of high fluidity concrete: powder based, VMA based, and combined. In the case of the powder based high fluidity concrete mixture, according to the textbook, increased viscosity due to the replaced fly ash can prevent segregation of coarse aggregate. On the other hand, decreased density of the powder due to the fly ash replacement can causes segregation but there is no report on this issue. Therefore, in this research, the segregation resistance and segregation evaluation method for powder based high fluid concrete mixture are evaluated. As a result, with increased replacing ration of supplementary materials, EIS value was decreased and apparently segregation resistance was increased. However, from the compressive strength evaluation depending on height of the cylindrical specimen, it was confirmed that the different of strength difference between top and bottom part of the specimen. Thus, following research regarding vertical segregation should be studied.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.835-840
• /
• 2000

The purpose of this study is developing concrete Mixing & placing method that could be adjusted to vertical joint at top-down method. Basic test was consists of general, high fluidity, and high quality mixing concretes and Mock-up test had several placing ways, placing positions. They were examined several placing ways, placing positions with Mock-up model comparison with three mixing concrete to know fluidity characterics. Used with Mock-up model to know packing ability from placing ways and positions. The result of the study like this; High fluidity and High quality concretes show favorable packing ability, especially, in sheath placing way. It was expected to good result in next planned real structure test.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 추계 학술논문 발표대회
• /
• pp.157-158
• /
• 2018

In this study, the current tendency to replace a large amount of material admixture, which is fly ash (FA) and blast furnace slag (BS), into concrete is that high-grade cheese high admixture of high fluidity concrete In consideration of the substitution rate, we considered J-Ring to investigate the influence on the segregation resistance and the method of evaluating the classical segregation. In addition to the admixture replacement rate in the study results, the EIS using J-Ring became lower and the percentage of vehicles with segregation increased. Such a tendency is considered to be positive when J-Ring is used when segregation is judged if segregation degree is similar to EIS using J-Ring.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2007년도 추계 학술논문 발표대회
• /
• pp.75-78
• /
• 2007

The steel slag, a by-product which is produced by refining pig iron during the manufacture of steel, is mainly used as road materials after aging. It is necessary to age steel slag for long time in air because the reaction with water and free-CaO in steel slag could make the expansion of volume. This problem prevents steel slag from being used as aggregate for concrete. However, steel slag used in this study was controled by a air-jet method which rapidly cools substance melted at a high temperature. The rapidly-chilled method would prevent from generation of free-CaO in steel slag. Also, Molten steel slag rapidly-chilled by air in high speed becomes a fine aggregate of nearly spherical shape. This study dealt with the influence of the using rate of rapidly-chilled steel slag and polymer resin on fluidity of polymer concrete, as a results Since RCSS has spherical shape and high density, up to replacement ratio of 100%, increases concrete fluidity under same polymer content and decrease polymer content in order to secure the same fluidity

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.605-608
• /
• 1999

In this paper, the application of limestone grain, which produced by being gathered electrically in the process of manufacturing of cement, to high fluidity concrete are investigated. High fluidity mortar is used for this experiment. According to the experimental results, especially, high viscosity and the loss of air content are accomplished by applying limestone grain as the partial substitution of fine aggregates. In case of hardened mortar, high strength development at early age can be achieved by using limestone grain. But excessive dosage of limestone grain can cause high drying shrinkage.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 봄 학술발표회 논문집(I)
• /
• pp.23-28
• /
• 1998

In this paper, the compensation of the shrinkage in high performance concrete by applying CSA expansive additives are discussed. According to toe experimental results, fluidity and strength decrease with the increase of the dosage of expansive additives. When 5% of expansive additive are mixed, not only high fluidity and strength, but also the compensation of drying-shrinkage can be achieved.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
• /
• pp.199-200
• /
• 2010

본 논문은 석회석 미분말을 활용한 고유동 콘크리트의 염소이온 확산계수를 통하여 확산계수를 추정 하였다. 또한 석회석 미분말의 혼합률에 따른 미세공극을 수은압입법에 의해 알아보았다.