• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2017년도 춘계학술대회
• /
• pp.735-737
• /
• 2017

An Off grid or remote solar electric systems are an energy supply to our home or to our companies without the utility of Grid at all. Off grid solar systems are very important for those who live in remote locations especially for developing countries where getting the electric grid is extremely expensive, inconvenient or for those who doesn't need to pay a monthly bill with the electric bill in general. The main critical components of any solar power system or renewable energy harvesting systems are the energy storage systems and its charge controller system. Energy storage systems are the essential integral part of a solar energy harvesting system and in general for all renewable energy harvesting systems. To provide an optimal solution of both high power density and high energy density at the same time we have to use hybrid energy storage systems (HESS), that combine two or more energy storage technologies with complementary characteristics. In this present work, design and simulation we use two storage systems supercapacitor for high power density and lithium based battery for high energy density. Here the system incorporates fast-response supercapacitors to provide power to manage solar smoothing and uses a battery for load shifting. On this paper discuss that the total energy throughout of the battery is much reduced and the typical thermal stresses caused by high discharge rate responses are mitigated by integrating supercapacitors with the battery storage system. In addition of the above discussion the off grid solar electric energy harvesting presented in this research paper includes battery and supercapacitor management system, MPPT (maximum power point tracking) system and back/boost convertors. On this present work the entire model of off grid electric energy harvesting system and all other functional blocks of that system is implemented in MATLAB Simulink.

• Bulletin of the Korean Chemical Society
• /
• 제32권12호
• /
• pp.4341-4346
• /
• 2011

Impact sensitivity, one of the most important screening factors for novel high energy density materials (HEDMs), was predicted by use of quantitative structure-property relationship (QSPR) based on the electrostatic potential (ESP) values calculated on the van der Waals molecular surface (MSEP). Among various 3D descriptors derived from MSEP, we utilized total and positive variance of MSEP, and devised a new QSPR equation by combining three other parameters. We employed 37 HEDMs bearing a benzene scaffold and nitro substituents, which were also utilized by Rice and Hare. All the molecular structures were optimized at the B3LYP/6-31G(d) level of theory and confirmed as minima by the frequency calculations. Our new QSPR equation provided a good result to predict the impact sensitivities of the molecules in the training set including zwitterionic molecules.

• 한국전기전자재료학회논문지
• /
• 제37권2호
• /
• pp.119-132
• /
• 2024

Dielectric ceramic capacitors present high output power density due to the fast energy charge and discharge nature of dielectric polarization. By forming dense ceramic films with nano-grains through the Aerosol Deposition (AD) process, dielectric ceramic capacitors can have high dielectric breakdown strength, high energy storage density, and leading to high power density. Dielectric capacitors fabricated by AD process are expected to meet the increasing demand in applications that require not only high energy density but also high power output in a short time. This article reviews the recent progress on the dielectric ceramic capacitors with improved energy storage properties through AD process, including energy storage capacitors based on both leadbased and lead-free dielectric ceramics.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2017년도 춘계학술논문요약집
• /
• pp.199-200
• /
• 2017

• Composites Research
• /
• 제26권3호
• /
• pp.175-181
• /
• 2013

고속충격을 받는 복합재 적층판의 충격거동 특성 중에서 관통 후 잔류속도, 시편에 의한 충격흡수에너지 그리고 충격손상영역에 대한 평가와 예측이 중요하다. 본 논문에서는 고속충격을 받는 Carbon/Epoxy 복합재 적층판의 잔류속도와 흡수에너지를 준실험적 방법을 통하여 예측할 수 있는 방법을 제안하였다. 고속충격에 의한 시편의 흡수에너지를 정적에너지와 동적에너지로 구분하였으며 정적에너지는 보강섬유의 파손과 정적 탄성에너지와 관련 있는 준정적압입실험을 통한 관통에너지를 사용하였다. 동적에너지는 고속충격 시 시편 일부의 움직임과 관련한 운동에너지에 대하여 몇 가지 모델을 제안하여 비교하였다. 공압을 이용한 고속충격실험을 수행하고 예측 값과 비교 분석하였다. 시편의 손상영역은 C-scan을 통하여 측정하였다. 관통한계속도보다 큰 초기 속도인 경우, 정적에너지인 관통에너지 뿐 만 아니라 시편의 동적 에너지가 시편 전체 흡수에너지에 크게 기여함을 알 수 있었다.

• 농업과학연구
• /
• 제42권4호
• /
• pp.361-368
• /
• 2015

본 연구는 육종가를 이용하여 배치한 거세한우에 고에너지 사료를 급여하여 성장, 도체성적 및 혈액성분의 변화에 대하여 분석을 해보았다. 육종가의 적용은 소고기 고급육이 가능한 개체를 선발하는 방법으로 사용되어져 왔다. 본 연구는 육종가에 의해 고, 저로 나누어진 한우그룹에 고에너지 사료를 급여효과를 알아보기 위해 수행되었다. 고육종가 그룹에서 고에너지 사료를 급여할 경우 도체성적이 높아진다는 가정을 하였다. 연구를 수행하기 위해 26마리의 거세한우를 이용하여 $2{\times}2$ 완전임의배치를 하였다(고에너지, 일반사양 과 고육종가, 저육종가로 배치). 체중, 일당증체량, 건물섭취량, 사료요구율의 결과로 고 육종가 그룹에서 수치적으로 높게 나타났다. 혈청성분분석 결과로 비육후기(20 - 27개월령)의 혈청성분중 포도당과 중성지방 농도가 고육종가 그룹에서 유의적으로 높게 나타났고 이는 도체성적에도 긍정적인 효과를 가져오는 것으로 나타났다. 하지만 선행연구에서 나타났던 혈중 알부민과 인의 성분은 도체등급에 영향을 미치지 않는 것으로 보인다. 도체중 분석에서는 근내지방도가 고육종가 그룹이 수치적으로 높게 나타났으나 유의적인 차이는 없었다. 본 연구의 결과로 특정 혈중대사 성분들 중 포도당과 중성지방과 같은 지방대사에 관여하는 성분들은 비육후기 육종가가 높을수록 높은 농도로 나타났고 이는 혈중 대사성분이 유전적인 영향에 의해서 변화가 된다는 것을 알 수 있었다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.1069-1074
• /
• 2006

Heat loss by window in building occupies about 1/4 of energy amount used building. Therefore, high thermal insulation of windows system can speak as very important part in save energy of building. in this research, After select most suitable frame design and Glazing system for high thermal insulation of windows, execute simulation of mixing frame and Glazing System. Also, manufacture windows with the result and execute verification experiment, with verified simulation, this research evaluated thermal insulation performance of window by Glazing System's change.

• Journal of Radiation Protection and Research
• /
• 제41권2호
• /
• pp.93-99
• /
• 2016

Background: Industrial X-ray CT system is normally applied to non-destructive testing (NDT) for industrial product made from metal. Furthermore there are some special CT systems, which have an ability to inspect nuclear fuel assemblies or rocket motors, using high power and high energy (more than 6 MeV) pulsed X-ray source. In these case, pulsed X-ray are produced by the electron linear accelerator, and a huge number of photons with a wide energy spectrum are produced within a very short period. Consequently, it is difficult to measure the X-ray energy spectrum for such accelerator-based X-ray sources using simple spectrometry. Due to this difficulty, unexpected images and artifacts which lead to incorrect density information and dimensions of specimens cannot be avoided in CT images. For getting highly precise CT images, it is important to know the precise energy spectrum of emitted X-rays. Materials and Methods: In order to realize it we investigated a new approach utilizing the Bayesian estimation method combined with an attenuation curve measurement using step shaped attenuation material. This method was validated by precise measurement of energy spectrum from a 1 MeV electron accelerator. In this study, to extend the applicable X-ray energy range we tried to measure energy spectra of X-ray sources from 6 and 9 MeV linear accelerators by using the recently developed method. Results and Discussion: In this study, an attenuation curves are measured by using a step-shaped attenuation materials of aluminum and steel individually, and the each X-ray spectrum is reconstructed from the measured attenuation curve by the spectrum type Bayesian estimation method. Conclusion: The obtained result shows good agreement with simulated spectra, and the presently developed technique is adaptable for high energy X-ray source more than 6 MeV.

• 대한건축학회논문집:구조계
• /
• 제34권11호
• /
• pp.63-72
• /
• 2018

In this study, we analyzed high-performance building technologies through a case study of 65 high-performance buildings in the U.S., Europe, Asia and Oceania. In detail, we reviewed the international trend of building energy-saving technology and energy consumption per unit area by analyzing buildings constructed within a 10 year period(2008-018). The primary energy consumption was $48-440kWh/m^2$, and the average value was calculated as $169.3kWh/m^2$. Although some buildings received high certification ratings, they did not meet either Korean or international energy evaluation standards. The system analysis revealed that many energy-saving technologies show various application rates in different countries because the technologies possess different properties. Furthermore, small-area building groups tended to have less primary energy consumption than the medium and large-area buildings, but the area-energy relationship $R^2$ value was analyzed as 0.3161, indicating no clear proportional relationship. Therefore, we propose that it is necessary to maximize the energy savings of buildings by taking into consideration a region's code, climate, building usage, area and space-using patterns to reduce energy and greenhouse gas emissions.

• 농업과학연구
• /
• 제43권5호
• /
• pp.810-817
• /
• 2016

The aim of this experiment was to determine the effect of a high-energy diet on the level of serum metabolites and on carcass characteristics of Hanwoo steers. High energy diets have been used for enhancing intramuscular adipose tissue in high quality beef cattle. However, there is not much information about the physiological reactions to this diet. We hypothesized that a high energy diet would increase blood metabolites and the meat quality of Hanwoo steers during the early and final fattening periods. A $2{\times}2$ factorial arrangement (High, Control, and Early, Final) in a completely randomized design was used to feed 24 Hanwoo steers. Two steers were kept in the same pen and 12 pens were used for the experiment. Blood was drawn from each steer on the first week of every other month from 11 to 28 months. Overall Average Daily Gain (ADG) and feed efficiency were not different between high energy and control diets (p > 0.05). However, Dry Matter Intake (DMI greater with the control diet than DMI with the high energy diet during the final fattening period (p < 0.05). Serum non-esterified fatty acid (NEFA) concentrations were greater in the control diet group than in the high energy diet group during the final fattening period (p < 0.05). However, serum albumin, glucose, total protein, triglyceride, and phosphorus were greater in the high energy group than those of the control group (p < 0.05). Carcass traits or physico-chemical characteristics were not different between high energy diet treatment and the control. These data indicated that a high energy diet (+ 3% TDN) increased serum triglyceride during early fattening periods and decreased non-esterified fatty acids during final fattening periods in Hanwoo steers.