• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.1327-1329
• /
• 2000

The thyristor among the power-semi-conductor elements, which has large current capacity and high voltage, is used widely nowadays. When the thyristor was being used to the long time, this element may be able to arise the system trip caused by changing the characteristic and dropping the performance. Therefore, it would be necessary to analyze the characteristic of element to maintain the stable operation of the system. In oder to analyze this characteristic, it would be need to test forward direction, reverse direction and leakage current by supplying the half-sine wave voltage. Among these testing, transient current condition is generated from the testing of leakage current. This transient current may be the main factor of the error in the precise measurement of leakage current. Therefore, this paper analyzes the relationship between supply voltage and transient current in measuring leakage current of the SCR, and then suggests the condition and cause of transient current as appearing the leakage current in the testing the leakage current.

• 한국전기전자재료학회논문지
• /
• 제16권5호
• /
• pp.418-423
• /
• 2003

AC loss is an important issue in the design of high-T$\sub$c/ superconducting power cables which consist of a number of Bi-2223 tapes wound on a former. In the cables, the tapes have different critical currents intrinsically. And they are electrically connected to each other and current leads. These make loss measurements considerably complex, especially for short samples of laboratory size. So special cautions are required in the positioning of voltage leads for measuring the true loss voltage. In this work we have prepared a conductor composed of three Bi-2223 tapes with different critical currents. The critical current and AC loss characteristics in the conductor have experimentally investigated. The results show that for uniform current distributions the conductor's critical current is proportional to the critical current of the Bi-2223 tape to which a voltage lead is attached. However it depends on the current non-uniformity parameter in the conductor rather than the tape's critical currents for nonuniform current distributions. The loss tests indicate that the AC loss is dependent on arrangements of voltage leads but not on their contact positions. The measured losses in the conductor also agree well with the sum of the transport losses measured in each Bi-2223 tape.

• 한국수자원학회논문집
• /
• 제53권12호
• /
• pp.1071-1079
• /
• 2020

하천수의 통합적인 물관리를 위해서는 농업용수의 목적으로 취수되는 하천수량과 같은 기초자료의 확보가 필수적이다. 취입보를 통해 취수되는 하천수는 농업용수로를 통해 도수되는데, 계측지점의 특성에 맞는 취수량 계측방법이 필요하다. 본 연구에서는 만경강 유역 어우보의 농업용수로 도플러 효과를 이용해 표면유속을 산정하는 전자파 표면유속계를 적용하였는데, 주로 홍수기와 같이 고유량 상황에서 사용되고 있다. 저유량이나 고풍속에서는 표면유속이 단면 전체의 평균유속을 대변하기 어렵기 때문에 연중 지속적인 활용도가 낮다고 평가받고 있어, 농업용수로에서 전자파 표면유속계를 이용한 계측이 적합한지에 대한 검증이 필요한 상황이다. 전자파 표면유속계로 계측한 자료를 실측 유량자료와의 비교를 통해 농업용수로에서의 취수량 자료를 산정하였다. 농업용수로에서 최저유속 약 0.3 m/s, 최저유량 약 1.0 m3/s 이상시 전자파 표면유속계를 이용해 산정되는 일단위 유량은 기준유량 대비 경향성과 정확도가 높은 편인 것으로 확인되었고, 특히, 고유량일때 정확도가 높은 것으로 나타났다. 저유량에서는 양적인 측면에서는 유효한 결과를 얻을 수 있으나, 자료의 경향성이 불안정한 것으로 미루어 저유량시 표면유속으로 단면의 평균유속으로 산정하는 것에는 후속적인 연구가 필요할 것으로 판단한다. 본 연구를 통해 일정 유속 이상의 인공수로에서는 전자파 표면유속계를 통해 취수량을 산정하는 것이 적정한 것으로 사료되어 하천수 사용량 계측의 방안으로서 널리 보급되길 기대한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.79.6-79
• /
• 2002

We propose here sequential 2 methods for obtain information of current or potential data for power transmission line. One is a digital data transmission unit, this is, an output of a current sensor of power transmission line is digitalized by use of an easy asynchronous protocol. The unit has high speed transform rate, easy making header caused of consisting of only logic circuit. The other is, the output of the unit is transformed via LAN interface and displayed on a personal computer. We have confirmed remote measuring using the method for 100A and 240 A of the current information of power transmission line. Therefore we will be able to see a current waveform by use of internet at a cheep c...

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 추계학술대회 논문집
• /
• pp.274-277
• /
• 2003

Critical current(Ic) degradation of HTS tapes after bending is one of the hottest issues in HTS development and application studies. Many people are measuring Ic degradations for effect of bending radius. However even if the bending radius is larger than the breaking radius a HTS tapes can be damaged by repetitive bending, which is unavoidable in the winding processes. Therefore, We studied the Ic degradation after repetitive bending. at 77K with self-field, of Bi-2223 tapes processed by "Powder-in-Tube" technique, which was made by America Superconductor Corporation(AMSC) and superconductiing tapes that strain is imposed measured critical current by temperature difference of L$N_2$ and normal temperature. Like this, critical current could measure that degradation about 1~3％ by temperature difference. These results will amount the most important basis data in power electric machine of superconductivity cable, magnet, etc that winding work is require.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 추계학술대회 논문집
• /
• pp.385-388
• /
• 1997

We hate examined the electrical properties of L-${\alpha}$-DLPC Langmuir(L) films by using a displacement current measuring technique with pressure stimulation. Displacement current was generated when the sample spread volume was about 280${\mu}\ell$, 360${\mu}\ell$ and compression velocity was about 30, 40, 50mm/min. Displacement current was generated in the range of gas state, gas/fluid state and fluid state in the course of monolayer compression. From the result, it is known that displacement current is generated in the range of high surface pressures as compression velocity become faster.

• 전기학회논문지P
• /
• 제57권3호
• /
• pp.338-342
• /
• 2008

Hybrid Electric Vehicle(HEV) is driven by an internal-combustion engine and an electric motor. It is a combination of an internal-combustion engine and several electrical equipments which use a high voltage battery, an electric motors, an inverter and others. But there is not any separate detailed enforcement regulations for high voltage electric appliances in the existing vehicle-related safety standards. So, test standards suggestion as well as test technique development need to be done for ensuring electrical safety, for an electric motor, a high voltage battery, a(n) inverter/converter and an electric power transmission units and other equipments to ensure the safety of high voltage electric appliances which is the HEV key electrical component. In this paper, We are to provide helpful data to support test technique development and test standard establishment for HEV design and electrical safety security by the following methods; by measuring the voltage, the electric current, and the frequency of HEV, by analyzing electrical characteristics of high voltage electric appliances, and by analyzing temperature characteristics of the electrical current among the analyzed electrical characteristics by thermal imagining cameras.

• Journal of Power Electronics
• /
• 제15권4호
• /
• pp.1139-1147
• /
• 2015

In this paper, an algorithm based on a model analysis of the online calculation of the root-mean-square (RMS) value of welding current for single-phase AC resistance spot welding (RSW) was developed. The current is highly nonlinear and typically non-sinusoidal, which makes the measuring and controlling actions difficult. Though some previous methods focused on this issue, they were so complex that they could not be effectively used in general cases. The electrical model of a single-phase AC RSW was analyzed, and then an algorithm for online calculation of the RMS value of the welding current was presented. The description includes two parts, a model-dependent part and a model-independent part. Using a previous work about online measurement of the power factor angle, the first part can be solved. For the second part, although the solution of the governing equation can be directly obtained, a lot of CPU time must be consumed due to the fact that it involves a lot of complex calculations. Therefore, a neural network was employed to simplify the calculations. Finally, experimental results and a corresponding analysis showed that the proposed algorithm can obtain the RMS values with a high precision while consuming less time when compared to directly solving the equations.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2009년도 정기총회 및 추계학술대회 논문집
• /
• pp.265-267
• /
• 2009

we proposed a grid connected peak load compensation system with high discharge current characteristics based on lithium polymer battery for development of the next generation power-station. The lithium polymer battery has faster discharge current characteristics than conventional battery, so that can compensate high active power demanded by load in a short time using the low capacity battery bank. Therefore, it is possible to control power leveling of grid by measuring storage energy of battery and active power which is needed from load. The validity of proposed system was verified through the simulation and experiment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 정기총회 및 창립40주년기념 학술대회 학회본부
• /
• pp.523-526
• /
• 1987

The present metering transformer being used for measurement has the characteristics of high reliability and high efficiency. In the future, however, it is thought that the scales of mettering transformer will be larger and the cost of production will increase as the transmission voltage ascends to UHV. And, also, it wilt be not easy to ensure the aseismatic capability. For the purpose of settling these problems, by applying optical sensor technology to electric power systems and by developing optical current transformer and potential transformer, we will realize the saving in energy, reduction of cost prise, improvement in measuring precision.