• Journal of the Korean Institute of Telematics and Electronics
• /
• v.12 no.2
• /
• pp.1-10
• /
• 1975

This paper presents an adaptive data compression algorithm for video data. The coling complexity due to the high correlation in the given data sequence is alleviated by coding the difference data, sequence rather than the data sequence itself. The adaptation to the nonstationary statistics of the data is confined within a code set, which consists of two constant length cades and six modified Shannon.Fano codes. lt is assumed that the probability distributions of tile difference data sequence and of the data entropy are Laplacian and Gaussion, respectively. The adaptive coding performance is compared for two code selection criteria: entropy and $P_r$[difference value=0]=$P_0$. It is shown that data compression ratio 2 : 1 is achievable with the adaptive coding. The gain by the adaptive coding over the fixed coding is shown to be about 10% in compression ratio and 15% in code efficiency. In addition, $P_0$ is found to he not only a convenient criterion for code selection, but also such efficient a parameter as to perform almost like entropy.

• Structural Engineering and Mechanics
• /
• v.84 no.3
• /
• pp.345-360
• /
• 2022

In this paper, the impact on seismic performance of an economical effective technique for retrofitting reinforced concrete (RC) columns using high-strength steel strips under high axial compression ratios was presented. The experimental program included a series of cyclic loading tests on one nonretrofitted control specimen and three retrofitted specimens. The effects of the axial compression ratio and spacing of the steel strips on the cyclic behavior of the specimens were studied. Based on the test results, the failure modes, hysteretic characteristics, strength and stiffness degradation, displacement ductility, and energy dissipation capacity of the specimens were analyzed in-depth. The analysis showed that the transverse confinement provided by the high-strength steel strips could effectively delay and restrain diagonal crack development and improve the failure mode, which was flexural-shear failure controlled by flexural failure with better ductility. The specimens retrofitted using high-strength steel strips showed more satisfactory seismic performance than the control specimen. The seismic performance and deformation capacity of the retrofitted RC columns increased with decreasing axial compression ratio and steel strip spacing. Based on the test results, a hysteretic model for RC columns that considers the transverse confinement of high-strength steel strips was then established. The hysteretic model showed good agreement with the experimental results, which verified the effectiveness of the proposed hysteretic model. Therefore, the aforementioned analysis can be used for the design of retrofitted RC columns.

• Journal of the Korea Computer Graphics Society
• /
• v.15 no.3
• /
• pp.11-18
• /
• 2009

In this paper, we introduce a novel method to extend the JPEG standard, which is the most widely used for lossy image compression, in order to improve compression ratio. To employ two of the most successful methodologies for the data compression: differential coding and quantization simultaneously, we propose a line-based approach. For each line in a block, we apply one-dimensional discrete cosine transformation to the increments instead of the pixel values. Those values are quantized and entropy-coded similarly to the JPEG standard. To further increase compression ratio, the proposed method is plugged into the JPEG standard to form a new compression method, in which the proposed method are applied to only selected JPEG blocks. In our experiment, we found that the proposed method outperform the JPEG standard when the qualities of the coded images are set to be high. We believe the proposed method can be simply plugged into the standard to improve its compression ratio for higher quality images.

• The Korean Journal of Emergency Medical Services
• /
• v.17 no.2
• /
• pp.57-64
• /
• 2013

Purpose : The purpose of the study is to investigate the quality and relevance of back strength or chest compression which is applied by isotonic exercise of hip joint. Methods : Subjects were 37 students who participated in the BLS course and accepted the informed consent from December 7 to 8, 2012. During CPR performance, back strength was measured by the researcher. CPR was used the manikin for practical training with using PC, conducted by standard CPR for 2 minutes, Quality of chest compressions included average chest compression depth, rate, and recoil ratio. Results : Back strength (kg) is related to the chest compression depth (mm) (r =.746, p <.001). The high quality CPR is the most important factor so high quality is full chest recoil of chest compression and chest compression depth (mm) (${\beta}$=.831, p <.001). In this study, chest compression rate and recoil ration were not influenced by back muscle strength. Conclusion : It is necessary to implement the CPR program to improve physical strength and effective performance of CPR.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.15 no.5
• /
• pp.432-438
• /
• 2003

This paper describes a modified Roebuck compression device as a potential compression device of a rotating cryogenic refrigeration system in superconducting machine such as generator or motor. The conventional cryogen transfer method from stationary refrigeration system to rotating system can be eliminated by an on-board cryogenic refrigeration system that utilizes well-designed multi-stage modified Roebuck compression device. This paper shows basic thermodynamic analysis of modified Roebuck compression device and its application for compressing neon at 77 K with substantial pressure ratio when the rotor diameter is 0.8 m with rotating speed of 3600 rpm. The device does not require any moving part in rotating frame, but two separate thermal reservoirs to convert thermal energy into mechanical compression work. The high temperature thermal reservoir is atmospheric environment at 300 K and the low temperature thermal reservoir is assumed as a liquid nitrogen bath at 77 K. The concept of the compression device in this paper demonstrates its usefulness of generating high-pressure neon at 77 K for rotating J-T neon refrigeration cycle of superconducting rotor.

• Journal of Korea Multimedia Society
• /
• v.6 no.5
• /
• pp.805-815
• /
• 2003

In this paper, we present the development of document compression codec using segmentation, wavelet lifting and bitplane coding. We use the segmentation to preserve the text appearance. We performed integer-to-integer wavelet lifting and also performed bitplane subblock coding for document compression. We acquired a high compression ratio and an efficient compression by encoding only the significant subblocks in the bitplane subblock coding. We also implemented scalar quantization by subband-oriented bit shifting. The system performs color conversion and downsampling before wavelet lifting and also performs graycode conversion and quantization before subblock coding. In the experiment, we show the performances of the system by presenting the high compression ratios and high PSNR values.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.7C
• /
• pp.671-680
• /
• 2009

The diagnostic medical images(CT, MRI) in PACS require large storage and long transmission time. A simple and cheap way of overcoming these limitations is to increase the compression ratio. However, this requires a clinical validation for accurate diagnostic applications. The aim of this paper is to improve the compression efficiency of lossless JPEG2000 for diagnostic CT images by performing a visual-Iossless threshold filtering in high frequency subband. A proposed method, based on 5/3 reversible DWT, provides different subband-threshold values according to the compression ratio and gives the high subjective quality to reconstructed diagnostic CT images.

• Journal of Information Processing Systems
• /
• v.11 no.3
• /
• pp.483-494
• /
• 2015

High Efficiency Video Coding (HEVC) is the most recent video codec standard of the ITU-T Video Coding Experts Group and the ISO/IEC Moving Picture Experts Group. The main goal of this newly introduced standard is for catering to high-resolution video in low bandwidth environments with a higher compression ratio. This paper provides a performance comparison between HEVC and H.264/AVC video compression standards in terms of objective quality, delay, and complexity in the broadcasting environment. The experimental investigation was carried out using six test sequences in the random access configuration of the HEVC test model (HM), the HEVC reference software. This was also carried out in similar configuration settings of the Joint Scalable Video Module (JSVM), the official scalable H.264/AVC reference implementation, running on a single layer mode. According to the results obtained, the HM achieves more than double the compression ratio compared to that of JSVM and delivers the same video quality at half the bitrate. Yet, the HM encodes two times slower (at most) than JSVM. Hence, it can be concluded that the application scenarios of HM and JSVM should be judiciously selected considering the availability of system resources. For instance, HM is not suitable for low delay applications, but it can be used effectively in low bandwidth environments.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.3
• /
• pp.67-74
• /
• 2015

BTC (Block Truncation Coding) image compression is simple to implement by hardware and has excellent edge retention capability of image, image compression techniques are widely used in LCD overdrive. In this paper, to maintain high visual quality and has high compression rate, Multi-Mode BTC (MM-BTC) algorithm is proposed. The MM-BTC has high compression rate using advanced Y-based BTC method and has high visual quality using improved 2-level and 4-level BTC method in this paper. As shown in simulation results, MM-BTC improves still image PSNR (Peak Signal to Noise Ratio) up to 2.34 dB as compared with other algorithms. When the MM-BTC is applied to LCD overdrive, MM-BTC improves moving picture PSNR up to 2.33 dB as compared with other algorithms in literature.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.5
• /
• pp.139-146
• /
• 2023

In this study, compressive strength and adhesion strength were measured as repair materials to evaluate the mechanical and electrical properties of compression and shear specimens with self-sensing repair materials. As a result of the experiment, the strength improvement rate of the compression test specimen was higher than the section enlargement area ratio, but the shear test specimen did not show an improvement in strength as much as the section enlargement area ratio. Compression experiments under load showed high correlation between FCR-Strain and FCR-Stress, confirming self-sensing performance. However, the shear test did not show as much correlation as the compression test. Accordingly, it is judged that the self-sensing repair material is suitable for the compression member on which the compression load acts in the building.