• Journal of Korean Academy of Nursing
• /
• v.4 no.2
• /
• pp.144-158
• /
• 1974

This study was undertaken in an attempt to; 1) measure value orientation of nursing activities, 2) identify the relationship between nurse's role perception and patient's expectation, and 3) evaluate the pattern of nursing education and nursing service administration. 203 hospitalized adults and 203 professional nurses from 11 general hospitals in Seoul during the period of July to December 1973 were tested according to questionnaire based on 4 categories of clinical nursing activities, 1) physical care, 2) observation and control, 3) psycho-social care and 4) therapeutic measures. Results of the study are as follows: 1. Nurses were more concerned than patients in the physical care category. Significant difference was revealed by p<.01 level (t=2.800). Mean value score of nurses was average (2.84), and mean value score of patients was relative' y low (2.49). None of the physical care category questionnaire items were over 3.5. 2. Respondents from hospitals of total care system revealed significant difference in the physical care category by P〈.025 level. (t=2.242). Mean value score of both group were average level (nurse 2.90, patient 2.53), nurses showed higher concern. 3. Difference between nurse's role perception and patient's expectation in observation and control category was revealed non- significance by p〉0.05. level (t=1.238). Mean value score of both group revealed relatively high (nurse=3.44, patient 3.19). 4. Difference between nurse's role perception and patient〉expectation in psycho-social cart category revealed non- significance by p〉.05 level (t=0.758), Mean value score of both group revealed average level (nurse =2.71, patient =2.53), 5. Non- significant difference was noted between B. S. N. and diploma nurse's role perception in the psycho- social care category by p> 0.1 level (t=0.316). 4. Difference between nurse's role perception and patient's expectation in the rapeutic me assures category revealed non- significance by p〉0.05 level) t=0.503). Horses showed high concern by mean value score 3.56 level and patients relatively high by 3.41. All items of this category revealed very high or relatively high value score.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.5
• /
• pp.413-417
• /
• 1998

In this paper, we investigate frequency dependance of inductance of FeCoB amorphous magnetic films. $(Fe_{1-x}Co_x)_{79}Si_2B_{19}$ was used as the basic composition of amorphous magnetic film having near zero magnetostriction. The amorphous magnetic films were fabricated with x=0.94 and x=0.95 by using sputtering method at high frequency. The films were anneald under non-magnetic field and near crystallization temperatures(30min at $280^{\circ}C$, 30min and 1hr at $400^{\circ}C$, respectively). As the results of the experiments with the fabricated films, the lowest coercive force was 0.084[Oe] at 400[W] of the input power and the crystallization temperature was $360^{\circ}C$ . In the case 30min at 40$0^{\circ}C$ the inductance value in the low frequency with x=0.95 was higher by 488% than that with x=0.94. The quality factor Q was below 0.7 for all samples. We obtained the highest quality value at 400[KHz] with 30min at $280^{\circ}C$ and x=0.94. The value was about 0.62. Also, the quality factor value was about 0.35 at 1[MHz] with 30min at $280^{\circ}C$ and x=0.95.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.4
• /
• pp.396-405
• /
• 2019

The speech privacy of closed office rooms located in a university campus was measured and assessed in terms of SPC (Speech Privacy Class) values. The measurements of two quantities, the LD (Level Difference) between a source and a receiving room, and the background noise level ($L_b$) at the receiving room were carried out in 5 rooms located in 3 different buildings in the university campus. Each of the 5 rooms was adjacent to both offices and corridors through walls. The TL (Transmission Loss) between the source and the receiver room was also measured to compare the difference of two standard methods, ASTM E2836-10 and KS F 2809. The present results show that the speech privacy of the 5 office rooms is not met the requirement for a minimum SPC values of 70. A minimum LD value of 41 dB between the source and the receiver room should be achieved for having a SPC value of 70 when the mean measured value of $L_b$ at the receiving room is 29.2 dB. That is, the TL(avg) value averaged over the octave bands from 160 Hz to 5000 Hz between the source and the receiver room should be or greater than 40 dB. The most important architectural factor influencing the LD value is the presence of openings, such as doors, and windows, on the adjacent walls between the source and receiving room. Therefore, if the opening of the adjacent wall is replaced by an opening with high sound insulation, the appropriate SPC value of the research and office rooms can be achieved.

• Journal of the Korean Ceramic Society
• /
• v.31 no.5
• /
• pp.552-560
• /
• 1994

A composite of TiB2-Al2O3 system was successfully prepared from a mixture of TiO2, B2O3, and Al by self-propagating high temperature synthesis (SHS) with a novel characteristic, utilizing the internal oxidation heat of aluminium metal of the mixture, instead of by a conventional technique, externally heating a mixture of Ti, B and Al2O3. From a mixture with B/Ti molar ratio of =2.0, pure two phases of TiB2 and $\alpha$-Al2O3 with good crystallinity and small, uniform sizes were formed. However, when the B/Ti molar ratio of the mixture goes to a value less than 2.0, in addition to the above main minerals, a small smounts of metastable phases such as TiB and Ti3B4 were formed. It was found that about 60%, the optimum green density of compacts gave their highest reaction rate and temperature during SHS process. TiB2-Al2O3 system composite with B/Ti molar ratio of =2.0 could be pressurelessly sintered even at 190$0^{\circ}C$ under Ar gas flows without any addition of sintering aids, showing their good properties such as 91.2% in relative density, 2750 kgf/$\textrm{mm}^2$ in Vickers hardness and 2620 kgf/$\textrm{cm}^2$ in flexural strength.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.3
• /
• pp.356-364
• /
• 2009

The current ruminant feeding models require parameterization of the digestion kinetics of carbohydrate fractions in feed ingredients to estimate the supply of nutrients from a ration. Using an automated gas production technique, statistically welldefined digestion rate of carbohydrate, including soluble carbohydrate, can be estimated in a relatively easy way. In this study, the gas production during in vitro fermentation was measured and recorded by an automated gas production system to investigate degradation kinetics of carbohydrate fractions of a wide range of ruminant feeds: corn silage, rice straw, corn, soybean hull, soybean meal, and cell mass from lysine production (CMLP). The gas production from un-fractionated, ethanol insoluble residue and neutral detergent insoluble residue of the feed samples were obtained. The gas profiles of carbohydrate fractions on the basis of the carbohydrate scheme of the Cornell Net Carbohydrate and Protein System (A, B1, B2, B3 and C) were generated using a subtraction approach. After the gas profiles were plotted with time, a curve was fitted with a single-pool exponential equation with a discrete lag to obtain kinetic parameters that can be used as inputs for modern nutritional models. The fractional degradation rate constants (Kd) of corn silage were 11.6, 25.7, 14.8 and 0.8%/h for un-fractioned, A, B1 and B2 fractions, respectively. The values were statistically well estimated, assessed by high t-value (>12.9). The Kd of carbohydrate fractions in rice straw were 4.8, 21.1, 5.7 and 0.5%/h for un-fractioned, A, B1 and B2 fractions, respectively. Although the Kd of B2 fraction was poorly defined with a t-value of 4.4, the Kd of the other fractions showed tvalues higher than 21.9. The un-fractioned corn showed the highest Kd (18.2%/h) among the feeds tested, and the Kd of A plus B1 fraction was 18.7%/h. Soybean hull had a Kd of 6.0, 29.0, 3.8 and 13.8%/h for un-fractioned, A, B1 and B2, respectively. The large Kd of fraction B2 indicated that NDF in soybean hull was easily degradable. The t-values were higher than 20 except for the B1 fraction (5.7). The estimated Kd of soybean meal was 9.6, 24.3, 5.0%/h for un-fractioned, A and B1 fractions, respectively. A small amount of gas (5.6 ml at 48 ho of incubation) was produced from fermentation of CMLP which contained little carbohydrate. In summary, the automated gas production system was satisfactory for the estimation of well defined (t-value >12) kinetic parameters and Kd of soluble carbohydrate fractions of various feedstuffs that supply mainly carbohydrate. The subtraction approach, however, should be applied with caution for some concentrates, especially those which contain a high level of crude protein since nitrogen-containing compounds can interfere with gas production.

• Journal of Korean Society of Rural Planning
• /
• v.16 no.3
• /
• pp.87-101
• /
• 2010

This research has a significance on providing basic material of landscape ecological planning and open space planning of the future site by selecting Sinseo innovative city area, large residential land development district in rural area, by classifying biotope types and implementing recreational value assessment in the level of area. First of all, as a result of classification of biotope types in research site, total 11 biotope type groups including stream biotope and its subordinate 51 biotope types. Also, as a result of the first value assessment of classified biotopes, there are total 5 types such as vegetation-full natural river, fallow ground in I grade. In addition, it is analyzed that grade II have 18 types, III are 10, IV are 12, the least valuable V are 6. Especially, grassland biotope(GD) was classified into grade II, which is one grade raised, because it is analyzed that it has high value in terms of normal access and availability although it was assessed as grade ill in terms of natural experience quality. Lastly, as a result of the second assessment, special areas for natural experience and recreation(1a, 1b) are 15, areas for natural experience and recreation(2a, 2b, 2c) are 47. Especially, the 52th drawing mark space was grade II in the first assessment but its value grade was upgraded because of its high value in terms of use evidence, size of the area, accessibility with housing area, history and cultural character and so on.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.3
• /
• pp.445-453
• /
• 2000

In this paper, the method of designing an active inductor for MMIC is proposed. The proposed tunable active inductor is composed of a cascade FET with feedback capacitors and resistors. Because of a very low series resistance in the proposed inductor, a very high Q factor can be obtained. Also it has an excellent characteristics suitable for high frequency band. The inductance value can be changed by controlling feedback capacitors, resistors and a bias voltage respectively. When the feedback resistor and parallel resistor within circuits are varied, the inductance value is changed from 0.2 nH to 1.7 nH in the range 1 to 15 GHz. Also we designed bandpass filter using the proposed active inductor and it shows the insertion loss of 0.4 dB and return loss, 20 dB.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.7
• /
• pp.946-951
• /
• 2003

The Genetic diversity and relationship of native Siri (Bos indicus) cattle populations of Bhutan were evaluated using 20 microsatellite markers. A total of 120 Siri cattle were sampled and were grouped into four populations according to their geographical locations which were named Siri West, Siri South, Siri Central and Siri East cattle. For each, 30 individuals were sampled. In addition, 30 samples each of Indian Jaba (B. indicus), Tibetan Goleng (B. taurus), Nepal Hill cattle (B. indicus), Holstein Friesian (B.taurus) and Mithun (B. frontalis) were typed. The mean number of alleles per loci (MNA) and observed heterozygosity (Ho) were high in the Siri populations ($MNA=7.2{\pm}0.3$ to $8.9{\pm}0.5$ and $Ho=0.67{\pm}0.04$ to $0.73{\pm}0.03$). The smallest coefficient of genetic differentiation and genetic distance ($F_{ST}=0.015$ and $D_A=0.073$) were obtained between Siri West and Siri Central populations. Siri East population is genetically distinct from the other Siri populations being close to the Indian Jaba ($F_{ST}=0.024$ and $D_A=0.084$). A high bootstrap value of 96% supported the close relationship of Siri South, Siri Central and Siri West, while the relationship between Siri East and Jaba was also supported by a high bootstrap value (82%). Data from principal component analysis and individual assignment test were in concordance with the inference from genetic distance and differentiation. In conclusion we identified two separate Siri cattle populations in Bhutan at the genetic level. One population included Siri cattle sampled from the West, Central and South of the country and the other Siri cattle was sampled from the East of the country. We suggest that Siri cattle conservation program in Bhutan should focus on the former population as it has received less genetic influence from other cattle breeds.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2006.10a
• /
• pp.293-316
• /
• 2006

[ $\blacksquare$ ] I/O Signal $\square$ We see adequate margin for the RC B design $\square$ Minimum ODW value is 328ps using Ac to DC measurement for the read case. $\square$ Minimum ODW value is 350ps using AC to DC mesurement method for the write case. $\blacksquare$ CLK Signal $\square$ The slew-rate decreases when the Cterm value increases $\square$ Lower slew-rate could effect delay and jitter. $\square$ There are some ldge issues during transitions with lower Cterm and without Cterm. $\square$ Our recommendation for the Cterm value range is between 1.5pF to 2.4pF. $\blacksquare$ ADD/CMD/Ctrl Signal $\square$ High output slew-rate at low VDD causes ring back that reduces voltage margin because of x-talk. $\square$ 30ohm Rterm for the CTRL signal shows a better signal integrity result compared to 36ohm.

• Computers and Concrete
• /
• v.5 no.1
• /
• pp.1-20
• /
• 2008

In this study, the effects and the interactions of water content, SP-binder ratio, and water-binder ratio on the workability performance of concrete were investigated. The experiments were designed based on flatted simplex-centroid experiment design modified from standard simplex-centroid one. The data gotten from the design was used to build the concrete slump model using neural networks. Research reported in this paper shows that a small number of slump experiments can be performed and meaningful data obtained with the experiment design. Such data would be suitable for building slump model using neural networks. The trained network can be satisfactorily used for exploring the effects of the components and their interactions on the workability of concrete. It has found that a high water content and a high SP/b ratio is essential for high workability, but achieving this by increasing these parameters will not in itself guarantee high workability. The w/b played a very important role in producing workability and had rather profound effects; however, the medium value about 0.4 is the best w/b to reach high slump without too much effort on trying to find the appropriate water content and SP/b.