• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.9
• /
• pp.1338-1350
• /
• 2012

This review focuses on the nutritional effects from birth until age at first calving on growth, mammary developmental changes, and first-lactation milk yield in heifer calves. The advancement in the genetic potential and the nutritional requirements of the animals has hastened the growth rate. Genetic selection for high milk yield has suggested higher growth capacity and hence increasing nutritional inputs are required. Rapid rearing by feeding high energy or high concentrate diets not only reduces the age of sexual maturity but also lowers the time period of attaining the age of first calving. However, high energy diets may cause undesirable fat deposition thereby affecting future milk yield potential. Discrepancies exist whether overfed or overweight heifers at puberty can influence the mammary development and future milk yield potential and performance. The data on post-pubertal nutritional management suggested that body weight at calving and post-pubertal growth rate is important in first lactation milk yield. There is a continuous research need for strategic feeding that accelerates growth of dairy heifers without reduction in subsequent production. Nutritional management from birth, across puberty and during pregnancy is critical for mammary growth and for producing a successful cow. This review will mostly highlight studies carried out on dairy breeds and possible available opportunities to manipulate nutritional status from birth until age at first calving.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.19 no.2
• /
• pp.54-61
• /
• 2017

Rice yield of South Korea in 2015 was the highest in last 30 years. The future direction of food policy in South Korea can be determined depending on whether the historically highest yield in 2015 can be continued or just one-off event. Therefore, it is necessary to understand whether such a high yield as 2015 can be reoccurred and how often it can occur. This study used the yield monitoring data from National Institute of Crop Science, Rural Development Administration and the meteorological data provided by Korea Meteorological Administration to identify the weather conditions, which could cause high yield, and how often these conditions occurred in the past. Our results showed that significantly high yield in 2015 could occur only when the mean sunshine hours of July and the mean sunshine hours from the end of August to early September are 5.1 hours and 6 hours, respectively. The probability of satisfying these weather conditions was 8/35 (23%) over the past 35 years. And the probability of successive high yield for two years was 1/35 (2.9%). The probability of recurrence of high yield within the next 5 years or 10 years after high yield was 4/35 (11.4%).

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.4
• /
• pp.262-264
• /
• 2005

A study on genetic variability and association of yield attributing characters with grain yield was carried out using 35 deepwater rice genotypes. High genotypic co-efficient of variation (GCV) was observed for plot yield, $EBT/m^2$, plant height and days to $50\%$ flowering (DFF). For all the traits, estimates of the phenotypic co-efficient of variation (PCV) were higher than GCV, indicating presence of environmental influence. High heritability and genetic advance was observed for plot yield, $EBT/m^2$ and plant height. Plot yield had significant positive association with test weight, $EBT/m^2$ and DFF. However, test weight had the maximum direct effect on grain yield

• Plant Resources
• /
• v.5 no.2
• /
• pp.104-108
• /
• 2002

In order to obtain basic information for selecting early maturing rice varieties which is suitable for early cropping before Alisma plantago in the southern part of Korea. Six rice varieties were grown from May to August in 2002 at Youngjeon Experiment Field, Sunchon and yield components and yield of plants were investingated. Early maturing rice cv. Grubyeo showed higher rough rice yield than any other varieties used in the experiment. It showed high yield components, such as culm length, panicle length, number of panicles per plant, number of spikelets per panicle and ratio of ripened grains. Therefore, it was concluded that Grubyeo was the most suitable variety with high yield for the cultivation before growing of Alisma plantago at the southern part of Korea. The heritability of culm length number of spikelets per panicle and rough rice yield were high and that of panicle length number of panicle per plant, ratio of ripened grain and 1,000 grain wt. of milled rice were low. According to the result of path coefficient analysis, characters highly correlated with rough rice yield showed large direct effects on rough rice yield.

• IE interfaces
• /
• v.22 no.3
• /
• pp.252-262
• /
• 2009

It is crucial to prevent low yields in the semiconductor industry. Since many factors affect variation in yield and they are deeply related, preventing low yield is difficult. There have been substantial researches in the field of yield prediction. Many researchers had used the statistical methods. Many studies have shown that artificial neural network (ANN) achieved better performance than traditional statistical methods. However, despite ANN's superior performance some problems such as over-fitting and poor explanatory power arise. In order to overcome these limitations, a relatively new machine learning technique, support vector machine (SVM), is introduced to classify the yield. SVM is simple enough to be analyzed mathematically, and it leads to high performances in practical applications. This study presents a new efficient classification methodology, Stepwise-SVM (SSVM), for detecting high and low yields. SSVM is step-by-step adjustment of parameters to be precisely the classification for actual high and low yield lot. The objective of this paper is to examine the feasibility of SVM and SSVM in the yield classification. The experimental results show that SVM and SSVM provides a promising alternative to yield classification for the field data.

• Computers and Concrete
• /
• v.6 no.4
• /
• pp.343-356
• /
• 2009

Experiments were designed to investigate the flow behavior of portland cement paste and concrete incorporating superplasticizers. The paste and concrete mixtures were subjected to prolonged mixing for up to 110 min at high temperature. The yield stress values of concrete and that of the corresponding cement paste were measured using a rotating rheometer and viscometer, respectively. The results reveal a weak linear correlation between the yield stress of concrete mixtures and that of the corresponding cement pastes. Results also indicate that the yield stress of concrete varies in a linear fashion with the elapsed time, while its variations with the temperature and superplasticizer dosage follow power and inverse power functions, respectively. In this study, the genetic algorithms (GA) technique was used to predict the yield stress of concrete considering various parameters, such as the mixing time, ambient temperature, and superplasticizer dosage. A sensitivity study was conducted to evaluate the ability of the GA equations thus developed to capture the effects of test parameters on the yield stress of concrete. It was found that the GA equations were sensitive to the effects of test parameters and provided yield stress predictions that compared well with corresponding experimental data.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.4
• /
• pp.614-621
• /
• 2012

Although there is a broad dispute over genetically modified foods on safety, the worldwide adoption of transgenic crops is rapidly increasing. The objectives of this study were to identify trends in the effects of transgenic on crop yields and examine the effect of agricultural variables including crop type, biotech trait, tillage system, and yield environment on corn and soybean yield. A meta-analysis from the 34 peer-reviewed scientific literatures was conducted to compare the crop yield between transgenic crops and conventional varieties. Results showed that the yield of transgenic corn and soybean was strongly dependent on growing conditions. Transgenic hybrids had higher yield potential in the low crop yield environments such as high weeds and/or insect infestation, low soil water, and cool temperature conditions, while transgenic crops did not have yield advantages in high yield environments. The results from this study suggest that producers should consider the potential yield environmental conditions and possible yield reductions when producers choose crop hybrids in their fields.

• Journal of Ginseng Research
• /
• v.4 no.2
• /
• pp.175-185
• /
• 1980

A study was made to clarify the topographical. and Physical characteristics of ginseng field in terms of soil science and to find the relationship between soil characteristics and ginseng growth, as well as yield of ginseng roots Forty nine farmer's red ginseng field of ginseng growing area were chosen for this study and investigated for two years. The results obtained were as follow. 1. Ginseng fie1ds with high yield which represent the more than 1.8kg of ginseng root per 3.2m2 were found in soil series of Bancheon, Yeongog, Weongog, etc. whose texture were the clay loam to clay soil. On the other hand, ginseng field with low yield were observed in soil series of seogto whose texture was loamy soil with high content of gravels. 2 Soil of ginseng field with high yield had higher content of clay. silt soil moisture and soil pore as compared with soils of low yields. These soil characteristics were positively correlated with stem length stem diameter and root weight of ginseng plsnt and negatively correlated with rate of missing plant 3. The adequate ranges of soil 3 phase from high yield ginseng field were 40 to 50% of solid Phase, 22 to 35% of liquid phase, 25 to 35% of gaseous phase in top soil and 45 to 55% of solid phase. 28 to 30% of liquid phase. 15 to 20% of gaseous phase in subsoil respectively.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.65 no.4
• /
• pp.339-345
• /
• 2020

Recently, abnormal weather conditions, such as extreme high temperatures and droughts, have increased in frequency due to climate change, there has accordingly been growing concern regarding the detrimental effects on field crop, including soybean. Therefore, this study was conducted to examine the effects of increased temperatures on soybean growth and yield using a temperature gradient chamber (TGC). Two major types of soybean cultivar, a medium- seed cultivar such as Daepung-2 and a large-seed cultivar such as Daechan, were used and four temperature treatments, aT+1℃ (ambient temperature+1℃), aT+2℃ (ambient temperature+2℃), aT+3℃ (ambient temperature+3℃) and aT+4℃ (ambient temperature+4℃) were established to examine the growth response and seed yield of each cultivar. Seed yield showed a higher correlation with seed weight (r=0.713***) and an increase in temperature affected seed yield by reducing the single seed weight. In particular, the seed growth rate of the large-seed cultivar (Daechan) increased at high temperature, resulting in a reduction in the number of days for full maturity. Our results accordingly indicate that large-seed cultivar, such as Daechan, is potentially vulnerable to high temperature stress. The results of this study can be used as basic data in the development of cultivation technology to reduce the damage caused by elevated temperatures. Also, further research is required to evaluate the response of each process contributing to seed yield production under high temperatures.

• Animal Bioscience
• /
• v.35 no.10
• /
• pp.1499-1511
• /
• 2022

Objective: This study was aimed to estimate the genetic parameters, including genetic and phenotypic correlations, of milk yield, lactation curve traits and milk composition of Thai dairy cattle from three government research farms. Methods: The data of 25,789 test-day milk yield and milk composition records of 1,468 cattle from lactation 1 to 3 of Holstein Friesian (HF) and crossbred HF dairy cattle calved between 1990 and 2015 from three government research farms in Thailand were analysed. 305-day milk yield was estimated by the Wood model and a test interval method. The Wood model was used for estimating cumulative 305-day milk yield, peak milk yield, days to peak milk yield and persistency. Genetic parameters were estimated using linear mixed models with herd, breed group, year and season of calving as fixed effects, and animals linked to a pedigree as random effects, together with a residual error. Univariate models were used to estimate variance components, heritability, estimated breeding values (EBVs) and repeatability of each trait, while pairwise bivariate models were used to estimate covariance components and correlations between traits in the same lactation and in the same trait across lactations. Results: The heritability of 305-day milk yield, peak milk yield and protein percentage have moderate to high estimates ranging from 0.19 to 0.45 while days to peak milk yield, persistency and fat percentage have low heritability ranging from 0.08 to 0.14 in lactation 1 cows. Further, heritability of most traits considered was higher in lactation 1 compared with lactations 2 and 3. For cows in lactation 1, high genetic correlations were found between 305-day milk yield and peak milk yield (0.86±0.07) and days to peak milk yield and persistency (0.99±0.02) while estimates of genetic correlations between the remaining traits were imprecise due to the high standard errors. The genetic correlations within the traits across lactation were high. There was no consistent trend of EBVs for most traits in the first lactation over the study period. Conclusion: Both the Wood model and test interval method can be used for milk yield estimates in these herds. However, the Wood model has advantages over the test interval method as it can be fitted using fewer test-day records and the estimated model parameters can be used to derive estimates of other lactation curve parameters. Milk yield, peak milk yield and protein percentage can be improved by a selection and mating program while days to peak milk yield, persistency and fat percentage can be improved by including into a selection index.