• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.1
• /
• pp.209-216
• /
• 2015

It is difficult to detect, track and intercept ballistic missile because of its high speed and short flight time from launching to target area. In order to increase the success rate of a ballistic missile interceptor, it is important to track the flight trajectory for a long time after the detection in the early launch. Radar Cross Section(RCS) of the target is important when the target to be detected by the radar, and the difference between the RCS value greatly changes depending on the viewing direction during the flight missile trajectory. In this paper, it is assumed that a ballistic missile is launched at east coast of North Korea, observe that missile by a land based radar and sea deployed radar. And it is analyzed and compared that RCS difference of ballistic missile.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2000.11a
• /
• pp.12-12
• /
• 2000

This paper investigated the effect of the film deposition rate for $CrN_x$ microstructure and mechanical properties. For these purpose, pure Cr an stoichiometric CrN films were deposited with various target power density on Si hardened M2 tool steel. The variation of ni trogen concentration in $CrN_x$ f analyzed by AES and deposition rate was calculated by measuring of thickness using ${\alpha}-step$ profilometer. The microstructure was analyzed by X-Ray Diffract and Scanning Electron Microscopy(SEM), and mechanical properties were evalua residual stress, microhardness and adhesion tests. Deposition rate of Cr and CrN increased as an almost linear function of target power density from $0.25\mu\textrm{m}/min$ and $0.15\mu\textrm{m}/min$ to $0.43\mu\textrm{m}/min$. Residual stresses of Cr and CrN films were from tensi Ie to compressive stress with an increase of deposi tion rate a compressive stresses were increased as more augmentation of deposition r maximum hardness value of $2300kg/\textrm{mm}^2$ and the best adhesion strength correspond HF 1 were obtained for CrN film synthesized at the highest target densitY($13.2W/\textrm{mm}^2$) owing to high residual compressive stress and increasing mobility.

• Transactions on Electrical and Electronic Materials
• /
• v.2 no.1
• /
• pp.22-26
• /
• 2001

ITO (Indium-tin-oxide) thin films were deposited on glass substrates by a dc magnetron sputtering system using ITO powder target. The methods of heat treatment are important factor to obtain high quality ITO films with low electrical resistivity and good optical transmittance. Therefore, both methods of the substrate temperature and post-deposition annealing temperature have been compared on the film structural, electrical and optical properties. A preferred orientations shifts from (411) to (222) peak at annealing temperature of 200$\^{C}$. Minimum resistivity of ITO film is approximately 8.7$\times$10$\^$-4/ Ωcm at substrate temperature of 450$\^{C}$. Optical transmittances at post annealing temperature above 200$\^{C}$ are 90%. As a result, the minimum value of annealing temperature that is required for the recrystallization of as-deposited ITo thin films is 200$\^{C}$.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.3
• /
• pp.212-218
• /
• 2013

This paper presents an SVD(Singular Value Decomposition)-Pseudo Spectrum method for SAR (Synthetic Aperture Radar) imaging. The purpose of this work is to improve resolution and target separability of SAR images. This paper proposes SVD-Pseudo Spectrum method whose advantages are noise robustness, reduction of sidelobes and high resolution of spectral estimation. SVD-Pseudo Spectrum method uses Hankel Matrix of signal components and SVD (Singular Value Decomposition) method. In this paper, it is demonstrated that the SVD-Pseudo Spectrum method shows better performance than the matched filtering method and the conventional super-resolution based multiple signal classification (MUSIC) method in SAR image processing. The targets to be separated are modeled, and this modeled data is used to demonstrate the performance of algorithms.

• Asia Marketing Journal
• /
• v.16 no.1
• /
• pp.149-168
• /
• 2014

This study investigates the effect of perceived risk on attitude toward mobile Social Network Services (SNSs). First, we understand that perceived risk of SNSs is a multidimensional concept, and we study the relationship between attitude and perceived risk such as social risk, performance risk, and privacy risk in SNS environments. Subsequently, the relationships between these multidimensional concepts of perceived risk and attitude are investigated. The result indicates that social, performance, and privacy risk have negative effects on attitude. In addition, the moderated effect of individual characteristic variables such as hedonic value and self-construal are confirmed as mitigating factors that alleviate the negative impact of perceived risk. The Findings show that customers who perceive SNSs to be risky are more likely to have a negative attitude toward SNSs. However, the negative impact of perceived risk on their attitude toward SNSs is alleviated in customers with high hedonic value. Similarly, the negative impact of perceived risk on their attitude toward SNS is weaker with customers in interdependent self-construal. This paper presents effective segmentation variables, such as consumer's motivation (hedonic value) and psychological variable (self-construal), which mitigate the risk perception of customers. Therefore, it provides practical guidelines for the marketing managers in terms of who to target and what kind of strategies to implement in terms of these segmentation variables to approach consumers more efficiently.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.6
• /
• pp.3725-3728
• /
• 2013

Background: The mammalian target of rapamycin (mTOR) /RPS6KB1 activation has recently been implicated in tumour development, but its role in lung cancer remains unclear. The aim of this study was to explore the role of mTOR/RPS6KB1 signaling pathway in non-small-cell lung cancer (NSCLC). Methods: Immunohistochemistry was performed to assess the expression of phosphorylated mammalian target of rapamycin (p-mTOR) and its downstream ribosomal phosphorylated RPS6KB1 (p-RPS6KB1) in NSCLC patients. We also analyzed p-mTOR/p-RPS6KB1 protein expression in 45 fresh NSCLC tissues using Western blotting. Results: The expression level of p-mTOR and p-RPS6KB1 was significantly higher in NSCLC tumor specimens than that in adjacent noncancerous normal lung tissues (P<0.01). p-mTOR expression correlated with p-RPS6KB1. Furthermore, high expression level of p-mTOR or p-RPS6KB1 in NSCLC was associated with a shorter overall survival (both P<0.01). Multivariate analysis indicated high level of p-mTOR expression was an independent prognostic factor (HR=2.642, 95%CI 1.157-4.904, p=0.002). Conclusions: p-mTOR and p-RPS6KB1 could be useful prognostic markers for NSCLC.

• Korean Journal of Materials Research
• /
• v.29 no.9
• /
• pp.532-541
• /
• 2019

Information and communication technologies are developing rapidly as IC chip size becomes smaller and information processing becomes faster. With this development, digital circuit technology is being widely applied to mobile phones, wireless LANs, mobile terminals, and digital communications, in which high frequency range of GHz is used. In high-density electronic circuits, issues of noise and EMC(Electro-Magnetic Compatibility) arising from cross talk between interconnects or devices should be solved. In this study, sheet-type electromagnetic wave absorbers that cause electromagnetic wave attenuation are fabricated using composites based on soft magnetic metal powder and silicon rubber to solve the problem of electromagnetic waves generated in wireless communication products operating at the frequency range of 2.4 GHz. Sendust(Fe-Si-Al) and carbonyl iron(Fe-C) were used as soft magnetic metals, and their concentrations and sheet thicknesses were varied. Using soft magnetic metal powder, a sheet is fabricated to exhibit maximum electromagnetic attenuation in the target frequency band, and a value of 34.2dB(99.9 % absorption) is achieved at the target frequency.

• The Journal of Fisheries Business Administration
• /
• v.45 no.3
• /
• pp.85-98
• /
• 2014

This study aimed to segment Chinese fisheries consumer market by means of cluster analysis based on Shanghai region consumers. The survey is conducted to 350 shanghai people on March 17-21 in 2014 and investigate demographic characteristics and consumer's behaviors unique to each segmented market by preference, labelling, quality, price, safety. The result of cluster analysis identified four market segments such as Catering type market, Worth pursuing type market, Substance pursuing type market, Trend pursuing type market. Catering type market is a passive fisheries consumption market and is not high attractive for Korea fisheries export market. Value pursuing type market consider importance to labelling, origin, brand and require high-quality and differentiation strategies. This market's main target species are high price fisheries such as tuna, salmon, crocker. Substance pursuing type market consider fisheries's safety and quality and purchases more popular fisheries such as crocker, hairtail, promfret, mackerel, squid. Trend pursuing type market's consumers prefer to purchase brands and trendy seafood rather than taste.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.1
• /
• pp.46-52
• /
• 2003

In this paper, we fabricated PRT(platinum resistance thermometers) with the trimming technology using high fine laser system. U. V.(wavelength： 355nm) laser was mainly used for adjusting Pt thin films resistors to 100Ω at 0$^{\circ}C$. Internationally, the accepted A-class tolerance of temperature sensor is ${\pm}$0.06Ω at 0$^{\circ}C$. according to DIN EN 60751. The width of trimmed lines was about 10$\mu\textrm{m}$ and the best trimming conditions of Pt thin films were power : 37mW, frequency : 200Hz and bite size：1.5$\mu\textrm{m}$. And 96 resistors, fabricated by photolithography and etching process, have 79∼90Ω and 91∼102Ω as the proportion of 45.7% and 57.3%, respectively. As result of sitting Pt thin films resistors to the target value(109.73Ω at 25$^{\circ}C$), 82.3% of all resistors had the tolerance within ${\pm}$0.03Ω and the others(17.7％) were within ${\pm}$0.06Ω of A-class tolerance. The PRTs which wore fabricated in this research had excellent characteristics as follows； high accuracy, international standard TCR(temperature coefficient of resistance) value, long-term stability, wide temperature range, good linearity and repeatability, rapid response time, etc.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.2
• /
• pp.128-137
• /
• 2018

In this paper, we propose a novel class separability measure for radar signals. To reduce the sensitivity of the relative aspect angle between a target and radar, to evaluate the discriminatory power of radar signals, the proposed method first calculates the correlation coefficients between two radar cross sections (RCSs) or linearly shifts one-dimensional (1D) radar signals (i.e., high-resolution range profiles (HRRPs)), or rotates two 2D radar signals (i.e., inverse synthetic aperture radar (ISAR) images). Then, it uses the maximum correlation coefficient when two radar signals are best aligned. Next, the proposed method obtains new correlation-based discriminant matrices (CDM) using maximum correlation coefficients. Finally, the cumulative distribution function (CDF) in the CDM and the value corresponding to the specific probability in the CDF are obtained, and this value represents the discriminatory power of the radar signal. Experimental results show that the proposed method can accurately measure the target separability.