• 경영과정보연구
• /
• 제31권1호
• /
• pp.89-116
• /
• 2012

본 논문은 2001년부터 2010년의 표본기간 동안 상장된 제조업을 대상으로 Shyam-Sunder and Myers(1999) 그리고 Frank and Goyal(2003)의 목표조정모델과 자본조달순위모델에 기초하여 Chirinko and Singha(2000)의 비판적인 관점이 반영된 실증분석 논문이다. Shyam-Sunder and Myers(1999)의 모형을 통해 분석한 결과, 목표 조정계수는 0과 1 사이에 값을 가지며 설명력이 높고 유의한 변수인 반면에 자금 부족분 계수는 0에 가까워 자본조달이론을 지지 하기에는 작은 값을 가졌다. 또한 Frank and Goyal(2003)의 방법론을 사용하여 실증분석한 결과 자본조달순위이론은 지지되지 않았다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.402-405
• /
• 2006

Radiometric calibration of optical image data is necessary to convert raw digital number (DN) value of each pixel into a physically meaningful measurement (radiance). To extract rather quantitative information regarding biophysical characteristics of the earth surface materials, radiometric calibration is often essential procedure. A sensor detects the radiation of sunlight interacted atmospheric constituents. Therefore, the amount of the energy reaching at the sensor is quite different from the initial amount reflected from the surface. To achieve the target reflectance after atmospheric correct, an initial step is to convert DN value to at-sensor radiance. A linear model, the simplest radiometric model, is applied to averaged spectral radiance for this conversion. This study purposes to analyze the sensitivity of several factors affecting on radiance for carrying out absolute radiometric calibration of panchromatic images from KOMPSAT2 launched at July, 2006. MODTRAN is used to calculate radiance at sensor and reflectance of target is measured by a portable spectro-radiometer at the same time the satellite is passing the target for the radiometric calibration. As using different contents of materials composing of atmosphere, the differences of radiance are investigated. Because the spectral sensitivity of panchromatic images of KOMPSAT2 ranges from 500 to 900 nm, the materials causing scattering in visible range are mainly considered to analyze the sensitivity. According to the verified sensitivity, direct measurement can be recommenced for absolute radiometric calibration.

• 한국전기전자재료학회논문지
• /
• 제35권5호
• /
• pp.488-493
• /
• 2022

Generally, diamond-like carbon films (a-C:H, DLC) have been shown to have a low coefficient of friction, a high hardness and a low wear rate. Pd-doped C thin film was fabricated using a dual magnetron sputtering with two targets of graphite and palladium. Graphite target RF power was fixed and palladium target RF power was varied. The structural, physical, and surface properties of the deposited thin film were investigated, and the correlation among these properties was examined. The doping ratio of Pd increased as the RF power increased, and the surface roughness of the thin film decreased somewhat as the RF power increased. In addition, the hardness value of the thin film increased, and the adhesive strength was improved. It was confirmed that the value of the contact angle indicating the surface energy increases as the RF power increases. It was concluded that the increase in RF power contributed to the improvement of the physical properties of Pd-doped C thin film.

• Journal of Information Processing Systems
• /
• 제18권3호
• /
• pp.443-456
• /
• 2022

An efficient and reasonable resource allocation strategy can greatly improve the service quality of Internet of Vehicles (IoV). However, most of the current allocation methods have overestimation problem, and it is difficult to provide high-performance IoV network services. To solve this problem, this paper proposes a network resource allocation strategy based on deep learning network model DDQN. Firstly, the method implements the refined modeling of IoV model, including communication model, user layer computing model, edge layer offloading model, mobile model, etc., similar to the actual complex IoV application scenario. Then, the DDQN network model is used to calculate and solve the mathematical model of resource allocation. By decoupling the selection of target Q value action and the calculation of target Q value, the phenomenon of overestimation is avoided. It can provide higher-quality network services and ensure superior computing and processing performance in actual complex scenarios. Finally, simulation results show that the proposed method can maintain the network delay within 65 ms and show excellent network performance in high concurrency and complex scenes with task data volume of 500 kbits.

• 한국통신학회논문지
• /
• 제30권3C호
• /
• pp.147-152
• /
• 2005

본 논문에서는 DTV 수신기의 비디오 화질 테스트용으로 사용될 수 있는 정지화 비디오 테스트 패턴의 압축을 위해 새로운 비트율 제어방법을 제안하였다. 특히 기존 MPEG-2의 비트율 제어에서 목표비트 할당 방법은 동영상에 적합하도록 정의되어 있는 반면에, 본 논문에서 제안한 목표비트 할당방법은 정지화 테스트 패턴의 압축에 적합하도록 하였다. 즉 정지화 테스트 패턴과 같은 움직임이 거의 없는 영상을 인코딩했을 경우에 발생되는 비트량과 평균 양자화 변수값은 매 GOP마다 I, P, 및 B 픽쳐의 종류에 따라 분포가 비슷하다는 특성을 이용하여 본 논문에서는 GOP단위로 목표 비트를 할당하도록 하였다. 이를 위해 정지화 영상의 압축에 적합한 정규화된 복잡도를 정의하고 이를 지속적인 GOP단위의 화질 평가를 통해 갱신 및 유지함으로써 최적의 화질을 일정하게 유지하도록 하였다. 제안한 알고리즘의 실험을 위해 인코딩된 테스트 스트림을 디코딩하여 화질을 평가한 결과 안정된 비트율과 우수한 화질을 얻을 수 있었다.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권5호
• /
• pp.2013-2020
• /
• 2014

Background: The aldehyde dehydrogenase 1 family member A1 (ALDH1A1) is one of the promising markers for identifying cancer stem cells in many cancer types, along with other markers including CD44. The aim of the present study was to evaluate the expression and clinical significance of putative cancer stem cell markers, CD44 and ALDH1A1, in a series of urothelial carcinomas of urinary bladder (UCUB) by tissue microarray (TMA). Materials and Methods: A total of 159 Urothelial Carcinomas (UC) including 96 (60%) low grade and 63 (40%) high grade carcinomas were immunohistochemically examined for the expression of CD44 and ALDH1A1. Correlations of the relative expression of these markers with clinicopathological parameters were also assessed. Results: High level expression of ALDH1A1 was found in 16% (25/159) of bladder UC which was significantly correlated with increased tumor size (p value=0.002), high grade (p value<0.001), pathologic stage (T1, p value=0.007 and T2, p value<0.001) and increased rate of recurrence (p value=0.013). A high level of CD44 expression was found in 43% (68/159) of cases, being positively correlated with histologic grade (p value=0.032) and recurrence (p value=0.039). Conclusions: Taken together, our results showed that ALDH1 was concurrently expressed in a fraction of CD44+ tumors and its expression correlated with poor prognosis in UCs. ALDH1A1 could be an ideal marker for targeted therapy of UCs in combination with conventional therapies, particularly in patients with high grade carcinomas. These findings indicate that cells expressing ALDH1A1 along with CD44 can be a potential therapeutic target in bladder carcinomas.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.646-653
• /
• 2001

LQG/LTR Control Methology is recently used for the analysis of multi-variable control in frequency domain. Target filter loop is designed by the demanding requirements such as cross-over frequency, disturbance rejection in low frequency domain, zero steady-state error, identification of maximum and minimum singular values and sensor noise rejection in high frequency domain. Loop transfer recovery is accomplished by solving the cheap control and then simulation close to the target filter loop. In this study, LQG/LTR Control Methodology is applied to the seat suspension system. It is found that this technique is very effective to control the system and improve the ride quality of human body.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.564-569
• /
• 2000

Model Based Compensator(MBC) is recently used for the analysis of multi-variable control in frequency domain. Target loop is designed by the demanding requirements such as cross-over frequency, disturbance rejection in low frequency domain, zero steady-state error, identification of maximum and minimum singular values and sensor noise rejection in high frequency domain. Loop transfer recovery will be continued in frequency domain until the plant with MBC comes close to the target loop. In this study, the technique using MBC is applied to the elevator vibration control system. It is found that this technique is very effective to control the vibration system.

• 유통과학연구
• /
• 제15권4호
• /
• pp.69-78
• /
• 2017

Purpose - The study was AI as exploratory study on artificial intelligence (AI) shopping information services, to explore the possibility of a new business of the distribution industry. For research, we compare to IBM of consumer awareness surveys an AI shopping information service for retailing channel and target goods group. Finally, we present to service scenario for distribution service using AI. Research design, data, and methodology - First, to identify possible the success of the information service shopping using AI, AI technology for the consumer is very important for the acceptance of judgement. Therefore, we explored the possibility of AI information service for business as a shopping. The experimental data were used to interpret the meaning of the relevant literature and the IBM Institute of Business Value (IBV) Report 2015. This research is based on the use of a technical acceptance model (TAM) to determine whether the consumer would adopt the 'AI shopping information service' technology. Step 1 of the process assumes that the consumer adopts AI technology. In step 2, consumers find their preference channels and goods targeted at them as per their preferences. Finally Step 3, we present scenario for 'AI shopping information service' based on the results of Step 1 and 2. Results - Consumers have expressed their high interests in the new shopping information services, especially the on/off line distribution channels can use shopping information to increase the efficiency in provision of goods. Digital channel (such as SNS, online shopping etc.) is especially high value goods such as cars, furniture, and home appliances by displaying it to an appropriate product group. Conclusions - The study reveals the potential for the use of new business models such as 'AI shopping information service' by the distribution industry. We present seven scenario related AI application refer from IBM suggestion, and the findings would enable the distribution industry to approach target consumers with their products, especially high value goods. 'Shopping advisor' is considered to the most effective. In order to apply to the other field of the distribution industry business, which utilizes AI technology, it should be accompanied by additional empirical data analysis should be undertaken.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1320-1326
• /
• 2011

The maximum speed of high-speed rail is restricted to various factors such as track condition including slope and radius, tunnel and dynamic stability of vehicle. Among the various factors, traction effort and resistance to motion is principal and basic factor. In addition, at high speed over 300km/h, aerodynamic drag amounts up to 80% of resistance to motion, that it can be said that aerodynamic drag is the most important factor to decide the maximum speed of high-speed rail system. This paper deals with a measure to increase the maximum speed of high-speed train by reducing aerodynamic drag. The traction effort curve and resistance to motion curve of existing high-speed train under development has been employed to set up the target of aerodynamic drag reduction to reach up to 500km/h without modification traction system. In addition, the contribution of various sources of aerodynamic drag to total value has been analyzed and the strategy for implementation of aerodynamic drag reduction has been discussed based on the aerodynamic simulation results around the train using computational fluid dynamics.