• 한국식생활문화학회지
• /
• 제12권2호
• /
• pp.195-200
• /
• 1997

The purposes of this study were to investigate the Maillard reactions of some oligosaccharides with lysine and the antioxidative effects of the ethanol extracts from their reaction mixtures on the soybean oil. The Maillard reactions were carried out of 2% oligosaccharides such as palatinose (PN), fructooligosaccharide (FO), isomaltooligosaccharide (IMO) with 2% lysine (L) for 24 hours heating at 60, 80, $100^{\circ}C$. The color intensity of Maillard reaction mixtures were determined by UV-VIS spectrophotometer upon reaction time and temperature. And the antioxidative effects on the soybean oil of each ethanol extract from Maillard reaction mixture of each oligosaccharide were measured by peroxide value (POV). POV's of soybean oil including reaction extracts were determined regularly every 2 days during 20 days storaged at $60{\pm}1^{\circ}C$. The results were obtained as follows: 1. The color intensity of the Maillard reaction mixtures were raised highly as the browning temperature and time increased. The color intensity of PN L browning mixture was the highest. The order of high color intensity at $100^{\circ}C$ was PN L>FO L>Glu L>IMO L. 2. Comparing the antioxidative effect of Maillard reaction product (at $100^{\circ}C$, for 12 hours) of each oligosaccharide to that of BHT and TBHQ, the order of high antioxidative effect was TBHQ>IMO L>BHT>Glu L>PN L>FO L. 3. From these results, it was known that PN L shown as high brown color intensity was appeared low antioxidative effect, while IMO L shown as low brown color intensity was appeared high antioxidative effect. So, it was recognized that there was no relation between brown color intensity and antioxidative effect.

• Korean Chemical Engineering Research
• /
• 제58권4호
• /
• pp.581-587
• /
• 2020

본 연구에서는 기존의 2,3-Butanediol (2,3-BDO) 탈수 반응시스템의 문제점을 해결하기 위해 새로운 반응 시스템이 제안되었다. 대기압 근처에서 2,3-BDO 반응물을 반응온도 360 ℃ 까지 올리기 위해서, 상용공정에서 일반적으로 사용되는 용광로를 사용하게 되면 반응 시스템이 적절히 작동할 수 없다는 것이 확인되었다. 그것은 2,3-BDO 올리고머로 고려되는 물질 때문이다. 그것은 용광로 튜브 안의 막힘, 폭발과 같은 안전 문제 뿐 아니라 반응 시스템의 유지보수의 어려운 문제점을 일으킬 수 있다. 그러한 문제점을 해결하기 위한 방법은 용광로를 대신해 감압운전 하에서 고압스팀을 사용하는 열교환기를 사용해서 반응물의 온도를 낮추고 반응 온도를 낮추는 것이다. 반응 속도론을 사용하여, 반응기의 성능이 감압운전과 더 낮은 온도, 330 ℃에서 크게 다르지 않다는 것을 보였다. 이 결과는 왜 새로운 반응 시스템이 제안되었는지를 설명한다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제6권3호
• /
• pp.27-32
• /
• 2004

High temperature superconducting coated conductor has a structure of /< superconducting layer>//. The buffer layer consists of multi layer, and the architecture most widely used in RABiTS approach is CeO$_2$(cap layer)/YSZ(diffusion barrier layer)/CeO$_2$(seed layer). Evaporation technique is used for the CeO$_2$ layer and DC reactive sputtering technique is used for the YSZ layer, A chamber was set up specially for DC reactive sputtering, Detailed features are as following. A separator divided the chamber into two halves a sputtering chamber and a reaction chamber. The argon gas for sputtering target elements flows out of the cap of sputtering gun, and water vapor for reaction with depositing species spouts near the substrate. Turbo pump is connected with reaction chamber. High speed deposition of YSZ film could be achieved in the chamber. Detailed deposition conditions (temperature and partial pressure of reaction gas) were investigated for the rapid growth of high quality YSZ film.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.331-336
• /
• 2001

Aragonite type of precipitated calcium carbonate was synthesized by the successive reaction with hybridization of waste scallop shells with limestone. In the first step, carbonation was performed by using calcined limestone with low brightness, followed by the additional carbonation using calcined-hydrous scallop shells with high brightness. The temperature and the amount ratio of calcined limestone to calcined-hydrous scallop shells were examined as parameters in the experimental conditions. The products were characterized by XRD, SEM. in addition to measurements of brightness index. the specific surface area, and bulk density. The amount ratio of limestone to scallop shell affected not only the brightness but also morphologies of products. The increase in relative amounts of limestone leads to decrease in brightness and bumpy surface of particles. High temperature reaction produces aragonite particles with longer sizes and higher bulk densities. This study has made an attempt to establish the synthesis of aragonite with high brightness and high strength by utilization of waste scallop shells.

• 공업화학
• /
• 제4권1호
• /
• pp.82-93
• /
• 1993

염소화 공정을 통해 batch-boat-system에서 회중석으로부터 텅스텐 성분을 추출하기 위해, 환원제인 탄소의 무게비, 반응온도, 반응시간, $Cl_2$ gas의 유량 그리고 시료입도와 같은 주요 반응 변수들에 대한 영향을 조사하였다. 이 염소화 공정들에 대한 적정조건들은 반응온도 $700^{\circ}C$ 이상, 광물시료에 대한 탄소의 무게비 0.08, 반응시간 20분, $Cl_2$ gas의 유량 $0.6{\ell}/min$, 광물시료의 입도 -200mesh였으며 위 조건하에서 광물중 99%의 tungsten성분이 추출되었다. 반응속도는 고온에서는 $Cl_2$ gas의 확산단계가, 저온에서는 화학반응단계가 속도결정단계로 보이며 각각의 단계에서 활성화 에너지는 고온 부분에서는 7.98kcal/mol이며 저온 부분에서는 31.2kcal/mol이었다.

• Korean Chemical Engineering Research
• /
• 제52권6호
• /
• pp.821-825
• /
• 2014

바이오매스의 수증기 가스화 특성을 고온 영역에서 살펴보고자 열중량 분석기(thermobalance)에서 톱밥 촤의 수증기 가스화 연구를 수행하였다. 반응 온도를 $850^{\circ}C$에서 $1400^{\circ}C$까지 수증기 분압을 0.3, 0.5, 0.7 atm으로 변화시키며 가스화 실험이 수행되었다. 반응 kinetics 해석은 기체-고체 화학반응의 세 가지 모델이 이용되었고 이 중 modified volumetric model이 중량 변화를 가장 잘 나타내었다. 가스화 온도 $900^{\circ}C$를 기준으로 diffusion control regime과 reaction control regime의 두 단계로 가스화가 구분되었으며 이때 각각의 regime에 대하여 활성화에너지와 빈도인자를 도출하고 수증기 분압의 영향을 살펴보았다. 가스화와 동시에 수성가스화 변환반응이 진행되어 생성기체의 $H_2$ 농도가 CO에 비하여 2배 정도 높은 값을 나타내었다.

• 한국균학회지
• /
• 제13권2호
• /
• pp.83-87
• /
• 1985

A. phoenicis는 고온에서도 높은 lactose hydrolysis에 대한 효소 반응 활성을 가지고 있으나, 이 균주에 의한 progesterone의 전환 반응은 반응 온도에 매우 민감한 것으로 나타났다. 균체 내외부의 반응액 조성을 sonication 방법을 이용하여 조사함 결과 반응 초기에 균체의 내부에는 외부에 비하여 $11{\alpha}-hydroxyprogesterone$이 더 높은 농도로 존재하였으나 반응이 진행됨에 따라 균체 내부의 $11{\alpha}-hydroxyprogesterone$이 다른 생성물로 전환되어 오히려 더 낮은 농도의 $11{\alpha}-hydroxyprogesterone$이 존재하였다. A. phoenicis mycelium은 유기용매가 존재하는 반응액내에서도 새로운 액체 배지가 연속적으로 공급될 경우 물질대사를 계속 진행시킬 수 있으며, mycelium의 성장을 저해하지 않는 방법으로 고정된 cell을 이용하여 고정층 반응기에서 연속적으로 A. phoenicis-hydroxyprogesterone을 생산할 수 있다고 판단된다.

• 한국군사과학기술학회지
• /
• 제20권5호
• /
• pp.654-664
• /
• 2017

The temperature profiles upon high speed impact of reactive structural materials were analyzed. A two color pyrometer, which included high-speed camera, spectral splitter, and band pass filters, was utilized to measure transient temperature profiles during and after reactive metal samples impacted into steel plate with velocities of 1600~1700 m/s. The spatial temperature distribution was analyzed from the ratio of spectral radiances at two different wavelength in infrared zone, i.e. 700 and 900 nm. The measured temperatures were calibrated with black body source. Two different types of metal samples, namely aluminum and nickel, were employed to understand reaction behavior upon the impact of samples in ambient condition. According to our experiments, the Ni sample appeared to barely react with ambient air producing an instant small fireball, while Al sample reacts violently with air generating a relatively prolong fireball.

• 한국분무공학회지
• /
• 제16권4호
• /
• pp.167-175
• /
• 2011

The HCCI engines have been known with high efficiency and low pollution and can be actualized as the new internal combustion engines. However, As for(??) the ignition and combustion depend strongly on the oxidation reaction of the fuel, so it is difficult to control auto-ignition timing and combustion duration. Purpose of this paper is creating the database for development of multi-dimensional simulation and investigating the influence of different molecular structure. In this research, the effect of n-heptane mole ratio in fuel (XnH) on the ignition delay from homogeneous charge compression ignition(HCCI) has been investigated experimentally. By varying the XnH, it was possible to ascertain whether or not XnH is the main resource of ignition delay. Additionally, the information on equivalence ratio for varying XnH was obtained. The tests were performed on a RCM (Rapid Compression Machine) fueled with n-heptane and iso-octane. The results showed that decreasing XnH (100, 30, 20, 10,0), the ignition delays of low temperature reaction (tL) and high temperature reaction (tH) is longer. And the temperature of reaction increases by about 30K. n-heptane partial equivalence ratio (fnH) affect on tL.and TL. When ${\phi}$nH was increased as a certain value, tL was decreased and TL was increased.

• 한국세라믹학회지
• /
• 제13권1호
• /
• pp.20-24
• /
• 1976

These are many kinds of self-hardening methods for sand mold using sodium silicate. When sodium silicate solution is mixed with calcium-orthosilicate powder hardening reaction occurs, which is based for self-hardening method at high temperature. The high temperature strength and resicual strength of mold are related to the mole ratio of sodium silicate and the contents of calcium-orthosilicate powder. The results obtained in this study were as follows: 1) The high temperature strength of mold was maximum at about $600^{\circ}C$, and at higher temperature showed lower value on the contrary. 2) The high temperature strength of mold was increased by increasing the amount of sodium silicate having lower mole ratio and high concentration. 3) The residual strength of mold was reduced by increasing the mole ratio of sodium silicate and increasing the concentration of calcium-orthosilicate.