• 한국항공우주학회지
• /
• 제49권2호
• /
• pp.139-146
• /
• 2021

하이브리드 로켓 연소에서 산화제 스월 분사는 회전방향 속도성분이 경계층 유동에 영향을 미쳐 연소안정화에 기여한다. 그러나 스월 강도가 증가할수록 연소성능을 과도하게 변화시키는 문제점이 나타난다. 따라서 참고문헌[7]의 삽입연료와 함께 사용하여 연소성능 변화를 최소화 하면서 연소불안정 억제를 시도하였다. 이를 위해, 일련의 실험을 계획하여 스월 강도와 삽입연료 위치를 변화하며 연소불안정의 발생과 연소성능 변화를 관찰하였다. 실험결과, 스월 각 6°, 삽입연료 위치 310 mm 조합에서 연소불안정이 억제되었으며 연소압력, O/F 비 그리고 연료 후퇴율 등의 변화가 최소인 것으로 확인하였다. 또한 고주파수 대역의 압력진동(p')와 열방출진동(q')의 위상차가 π/2로 음의 결합을 형성하도록 연소조건을 유지하는 것이 저주파수 연소불안정 발생을 억제하는 필요충분조건임을 재확인하였다.

• 에너지공학
• /
• 제11권2호
• /
• pp.90-98
• /
• 2002

본 연구는 선회유동과 연소인자가 9.4L인 터보과급 디젤엔진의 성능과 배기가스특성에 미치는 영향을 실험적으로 고찰하였다. 일반적으로 디젤엔진의 연소과정에서 선회유동은 분사되고 있는 연료와 흡칩공기의 혼합을 촉진시켜 줌으로써 엔진성능을 향상시키는데 매우 중요한 인자가 된다. 특히 터보과급 디젤엔진에서는 실린더내의 고온.고압가스로 인하여 연비와 NO$_{x}$ 농도는 서로 상반관계를 가지므로 적절한 용량의 과급기선정으로 흡.배기시스템, 분사시스템 및 연소실의 설계 등을 고려할 필요가 있다. 본 연구의 결과로서, 정상유동실험을 통하여 선회비가 증가함으로써 평균유량계수가 감소하고, 반면에 걸프 펙터가 증가함을 알 수 있었다. 또한 엔진실험을 통하여 흡기포트의 선회비 2.43, 분사시기 BTDC 13$^{\circ}$ CA, 압축비 16, 리앤트란트 5$^{\circ}$형 연소실, 노즐분공경 $\Phi$0.28*6 및 과급기 GT40(압축기 A/R 0.58, 터빈 A/R 1.19)의 적용인자가 최적의 성능 및 배기가스를 만족시킬 수 있었다.

• 한국전산유체공학회지
• /
• 제7권3호
• /
• pp.9-16
• /
• 2002

Most of modem aerospace gas turbines must be operated at a gas temperature which is several hundreds of degrees higher than the melting temperatures of the materials used in their construction. Complicated cooling schemes need to be employed in the combustor walls and in the high pressure turbine stages. Internal passages are cast or machined into the hot sections of aero-gas turbine engines and air from the compressor is used for cooling. In many cases, the cooling system is engineered to utilize jets of high velocity air, which impinge on the internal surfaces of the components. They are categorized as 'Impinging Cooling Method' and 'Vortex Cooling Method'. Specially, research of new cooling system(Vortex Cooling Method) that overcomes inefficiency of film cooling and limitation of space. The focus of new cooling system that improves greatly cooling efficiency using less amount of cooling air on surface heat transfer elevation. Therefore, in this study, a numerical analysis has been peformed for characteristics of flow and heat transfer in the swirl chamber and compared with the flow measurements by LDV. Especially, for understanding high heat transfer efficiency in the vicinity of wall, we considered flow structure, vortex mechanism and heat transfer characteristics with variation of the Reynolds number.

• Journal of Mechanical Science and Technology
• /
• 제14권10호
• /
• pp.1143-1150
• /
• 2000

The effects of ambient conditions on vaporizing sprays from a high-pressure swirl injector were investigated by an exciplex fluorescence method. Dopants used were 2% fluorobenzene and 9% DEMA (diethyl-methyl-amine) in 89% solution of hexane by volume. In order to examine the behavior of liquid and vapor phases inside of vaporizing sprays, ambient temperatures and pressures similar to engine atmospheres were set. It was found that the ambient pressure had a significant effect on the axial growth of spray, while ambient temperature had a great influence on the radial growth. The spatial distribution of vapor phase at temperatures above 473K became wider than that of liquid phase after half of injection duration. From the analysis of the area ratio for each phase, the middle part (region II) in the divided region was the region which liquid and vapor phases intersect. For liquid phase, fluorescence-intensity ratio was greatly changed at lms after the start of injection. However, the ratio of vapor phase was nearly uniform in each divided region throughout the injection.

• 한국자동차공학회논문집
• /
• 제8권5호
• /
• pp.20-27
• /
• 2000

Characteristics of two favorite injection tools for gasoline direct injection application were compared. An air-assisted fuel injector (AAFI) and a high-pressure swirl injector (HPSI) were designed and fabricated for prototype development, and the characterization strategies and processes for both injection tool have been arranged in parallel. Characterization works were carried out mainly through measurements, and in some cases, computational fluid dynamic analysis was utilized. In this paper, overall characteristics defined as flow rate, spray pattern, penetration, internal spray structure and drop size distribution, was discussed. The AAFI was found to be advantageous in flexibility of fuel flow rate, and the HPSI in stability and precision. Spray shape factor was introduced to describe the development of intermittent sprays from both injectors. Axial penetration appeared to be almost linear in the case of the AAFI while its speed continuously decreased with time in the HPSI.

• 한국자동차공학회논문집
• /
• 제8권5호
• /
• pp.28-35
• /
• 2000

As a second part of the comparison study, microscopic features of an air-assisted fuel injector(AAFI) and a high-pressure swirl injector (HPSI) were characterized. They consist of the internal spray structure in terms of fuel mass and drop diameter, the overall atomization performance with respect to operating parameters and the drop size distribution. Large droplets are concentrated in around the head part of a spray field of the HPSI, while in the case of the AAFI, they were distributed in the tail part. Although the AAFI showed the better atomization performance, the feasible ranges of operating parameters such as injection and ambient pressure were found to be wider in the HPSI. Drop size distribution of the AAFI sprays was more dispersed than that of the HPSI. Drop size distribution of the AAFI sprays was more dispersed than that of the HPSI. However, at the well-atomized condition, it appeared to be very uniform.

• 한국산업융합학회 논문집
• /
• 제7권2호
• /
• pp.153-159
• /
• 2004

The purpose of this research is to investigate the performance of swirl combustion chamber diesel engine by changing the jet passage area, the depth and shape of the piston top cavity (main chamber). The performance of diesel engine with newly changed swirl combustion chamber was tested through the experimental conditions as engine speed, load and injection timing etc. The test results were compared and analyzed. And another purpose of this research is to make a new diesel engine that is satisfied fuel consumption and regulation value of exhaust gas. 1. The rate of fuel consumption was affected significantly by the jet passage area at the high speed and load than low speed and low load. The influence of jet passage large area was proven to decrease the rate of fuel consumption. 2. Smoke was affected significantly by the depth of the piston top cavity, but exhaust temperature and the rate of fuel consumption wasn't affected. The rate of fuel consumption was affected by changing injection timing. 3. The rate of fuel consumption, exhaust temperature and Smoke were affected significantly by the shape of the piston top cavity from rectangular to trapezoid. That is we have all high value. The exhaust smoke density and exhaust gas temperature depended sensitively on variation of the injection timing rather than the shape of the combustion chamber within the experimental conditions. 4. We made a new diesel engine that is satisfied design target values(sfc=190 g/hr, NOx + THC=6.0 g/KWh, PM=0.3 KWh), the rate of fuel consumption and emission standard etc., through changing injection timing at the maximum torque point and rated power point. Although we have a little high NOx value.

• 한국추진공학회지
• /
• 제17권6호
• /
• pp.11-19
• /
• 2013

본 연구에서는 고온으로 가열된 연료가 다양한 종류의 스월 인젝터를 통해 분사되는 경우 분사 특성의 변화를 실험적으로 확인하였다. 3종의 스월 인젝터로 3 ~ 10 bar의 분사압력을 가하면서 연료온도가 $50{\sim}270^{\circ}C$ 범위에서 변화하는 경우 인젝터의 유량계수(${\alpha}$)를 계측하였다. cavitation number ($K_c$)에 대한 ${\alpha}$ 변화 특성을 확인한 결과 ${\alpha}$ 변동 특성이 오리피스 직경과 스월러 형상에 모두 영향을 받았고, 비등에 의한 연료분사 특성을 스월러 유로와 오리피스 유로 면적비인 AR과 관련지어 살펴 본 결과에서는 AR이 커질수록 비등 영향은 더 지연되고 비등의 영향이 미치기 시작하면 ${\alpha}$ 감소 기울기는 더 큰 것으로 확인되었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.112-117
• /
• 2001

An experiment using high preheated and swirled air in the coaxial diffusion flame burner was carried out in order to decrease NOx emission and improve the thermal efficiency. $N_2$ gas was used for diluent and propane was utilized for fuel. Combustion using high preheated air has two remarkable characteristics ; (1) low NOx emission with increasing dilution level, (2) high thermal efficiency in the furnace. Also, swirled air can mix fuel and oxidizer well in condition of diffusion flme and maintain the stable combustion. The color of flame changes from yellow to blue green according to increasing the dilution level of mixture gas. NO emission decreased with increasing dilution level and the swirl number.

• 대한기계학회논문집B
• /
• 제37권12호
• /
• pp.1079-1089
• /
• 2013

폐기물을 효과적으로 소각 처리하기 위해, 고형화된 입자를 고속으로 연소시키는 소각로의 유동 특성을 수치해석적으로 조사하였다. 본 연구에서는, 기존 발전소에서 통용되는 선회 유동 유발을 통한 안정적 화염형성 개념과 고에너지 밀도를 갖는 로켓 엔진 연소실의 설계 개념을 복합적으로 적용하였다. 첫단계로, 소각로로 분사되는 연료와 공기의 유동 특성 파악을 위해 1차 연소실에 주 분사기와 보조 분사기를 장착하여 비반응 유동장 수치해석을 수행하였다. 설계 변경 인자로 주 분사기의 편향각, 보조 분사기의 하향각, 두 분사기간 간격을 선정하였다. 이러한 설계 인자의 변경에 따른 선회 유동 형성의 정도를 파악하기 위해 선회수(swirl number)를 평가 인자로 사용하였다. 각각의 설계 인자가 변함에 따라 선회수는 편향각이 증가할수록 선회수가 증가하였으며, 하향각에 따라서는 선회수가 크게 변하지 않았다. 설계 인자에 따라 형성되는 재순환 영역의 크기가 달라지며 이는 선회수의 크기에도 영향을 끼쳤다. 재순환 영역의 크기가 작으면 선회수가 큰 경향성을 보였다. 이러한 수치해석을 통해 활발한 선회 유동을 형성시킬 수 있는 설계 조건을 찾을 수 있었다.