• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.5
• /
• pp.1030-1037
• /
• 2009

SAW Sensor is greatly developed today and Reader Platform which uses SAW Sensor for temperature or pressure is required to use TDS method for low power and high speed processing. For to use this Platform, high speed timer is required to measure a short interval between reference signal and reflectior's signal. This paper proposes that platform receive SAW Sensor's signals and transform digital signal through comparator. Next the transformed signal is measured by Timer Platform and the measured interval is displayed with time. This paper proposes method of measurment of time with nano sec unit.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1798-1799
• /
• 2011

In this paper, A new cost-effective and accurate input noise rejection method for High Speed Counter module of PLC (Programmable Logic Controller) is proposed. By using combination of simple additional logic circuit and the Timer Pulse function of general purpose MPU, Cost-effectiveness and improvement of accuracy of filtering function can be achieved. This proposed method is verified by simulation. This proposed method is much useful for simple industrial controller based on simple microprocessor because of simplicity, accuracy and low cost.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.879-883
• /
• 2000

A system for measuring and adjusting the oscillating frequency of a balance wheel whick determins the accuracy of mechanical timers. The balance wheel oscillates rotatively suspended by a hair spring which is welded at the other end to the pivot tube. The natural oscillatory frequency of the balance wheel is determined by the length of hairspring from the balance wheel to the point if other parameters the length in the torsional oscillation model are not changed, so the frequency of the balance wheel can be adjusted to meet a requirement by the adjustment of the hairspring length using ultrasonic welding. And the movement of wheel teeth is measured in realtime by a high speed photo fiber sensor and Auto Correlation is used to find a more accurate oscillation period from the measured signal with some variations.

• The KSFM Journal of Fluid Machinery
• /
• v.11 no.3
• /
• pp.50-55
• /
• 2008

The diverter system is a key component in achieving a high accuracy liquid flow rate standard using a static gravimetric system with a flying start and stop method. The diverter is a moving device used to direct flow alternately along its normal course(by pass) or towards the weighing tank. The time needed for collection into the weighing tank is measured using a timer. So it is important to the diversion period is sufficiently fast and triggering point of timer which is determined the filling time. On this studies show that uncertainty of diverter system for changing diversion speed and triggering point was estimated in accordance with Guide to The Expression of Uncertainty in Measurement(ISO).

• Journal of Korea Multimedia Society
• /
• v.8 no.2
• /
• pp.258-268
• /
• 2005

The efficient provision of multicast service to moving hosts in mobile computing environments is not so easy task. Bi-directional tunneling scheme causes overhead about encapsulation and triangular routing. On the other hand, remote subscription scheme need freDuent tree reconstruction, which is inefficient for rapid moving hosts. In this paper we propose Mobility Based Mobile Multicast(MBMOM) scheme which is based on host's mobility information. Ultimately MBMOM try to find the strong points of remote subscription scheme and hi-directional tunneling scheme. If host's mobility speed is considered to be high, multicast packets are forwarded using hi-directional tunneling scheme from home agent continuously. If host's mobility speed is considered to be slow, remote subscription scheme is applied for foreign agent and it try to join multicast tree. We developed analytical models to analyze the performance of proposed scheme and simulated our scheme compared with MOM(Mobile Multicast), RBMOM(Range Based MOM), and TBMOM(Timer Based MOM) schemes. Simulation results show that our scheme has shorter transmission delay than above 3 schemes in the aspect of host's mobility speed and multicast group size.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.1042-1046
• /
• 2008

Both the weighing bridge and the diverter system is a important component in achieving a high accuracy liquid flow rate standard using a static gravimetric method. The weighing bridge is a tank which weighing collected flow with a load cells. The diverter is a moving device used to direct flow alternately along its normal course(by pass) or towards the weighing tank. The time needed for collection into the weighing tank is measured using a timer. So it is important to the diversion period is sufficiently fast and triggering point of timer which is determined the filling time. On this studies show that the measurement deviation of load cell and uncertainty of diverter system for changing diversion speed and triggering point was estimated in accordance with Guide to The Expression of Uncertainty in Measurement(ISO).

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.915-916
• /
• 2007

There are many equipments for the Short Circuit Test, for example Short Circuit Generator, Induction Motor, Sequence Timer, Exciter, CLR, Back Up Breaker, Making Switch and TRV etc. Especially Back up Breaker and Making Switch are very important equipments to test the short circuit test. A role of a Back up Breaker is to break high-voltage and high-current for short circuit test and a Making Switch should be operated always same speed/time and kept electrical-mechanical characteristics to make the voltage and current of short circuit test. This study introduces to the short circuit test also to kinds, principal movements and compare them of Back up Breaker and Making Switch.

• Journal of Biosystems Engineering
• /
• v.12 no.3
• /
• pp.7-16
• /
• 1987

This study was carried out to develop a microcomputer-based data acquisition and control system which was able to collect the data of engine performance test automatically and control the speed and load of the engine. The results of the study are summarized as follows: 1. The signal processing devices, which were able to measure cylinder pressure, coolant temperature, compositions of exhaust gas, fuel consumption, engine rpm and torque etc., were developed. The results of calibration showed that all of devices had high accuracy ranging from 0.3% to 0.69% respectively. 2. The PIA (peripheral interface adapter) for interfacing digital signal and PTM (programmable timer module) for displaying real time every 0.0408 sec were designed and developed. 3. An engine-speed control system using a stepping motor and driver was developed. The control system had the stability, and faster settling time than the manual control system. 4. The automatic control system of electrical dynamometer, which was able to control the speed and load of dynamometer, was developed with a SSD (shackleton system driver) and D/A converter. 5. The computer programs, which were able to collect and process the data of engine tests, were developed using both the machine language and BASIC.

• Journal of KIISE:Information Networking
• /
• v.31 no.2
• /
• pp.188-195
• /
• 2004

We have analyzed the performance of TCP in the CDMA mobile communications systems with the adaptive modulation and coding(AMC). The wireless channel using AMC is characterized with not high error rate but highly varying bandwidth. Due to time-varying bandwidth, timeout events of TCP occurs more frequently, which leads to the throughput degradation. The analysis model is composed of the two parts. In the first part, we divide TCP packet stream into ‘packet groups’and derive the probability distribution of the wireless transmission time of each Packet group that reflects the time varying characteristics of AMC. In the second part, we formulate embedded Markov chain by making use of the results of the first part to model TCP timer mechanism and wireless transmission. Since our system model is characterized by the forward link high speed data transmission using AMC, the results reported in this paper can be used as a guideline for the design and operation of HSDPA, 1xEV-DO, and 1xEV-DV.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.2
• /
• pp.93-102
• /
• 2005

The purpose of this study was to examine the effect of step length on the joint moment. The subjects were 4 undergraduate and graduate students in their 20s with normal legs. The subjects were individually tested by the running timer at the walking speed of 0.67m/s, 134m/s, and 2.46m/s. The step length was regulated to -10% of normal, normal and +10% of normal step length using foot print. The walking performances of each subjects were filmed using a high speed video camera. The raw data were analyzed by LabVIEW Graphical Program and these data were analyzed by ANOVAs and Scheffe. The results of this study were as follows: The maximum dorsiflexion moment of the ankle joint increased as the step length increased only at the fast walking speed. Although there wasn't significant difference shown in the plantar flexion moment, regular pattern in the plantar flexion moment which increased as the step length increased was found. The first maximum extension moment of the knee joint increased only at the normal walking speed, but there appeared no significant difference in the maximum flexion and second extension moment. The maximum extension moment of the hip joint increased at the normal and fast walking speed. Although there wasn't significant difference, regular pattern in flexion moment which increased as the step length increased was found.