• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.9B
• /
• pp.914-922
• /
• 2009

In this paper, we propose a matrix based real-time pattern matching method, called MDPI, for real-time intrusion detection on several Gbps network traffic. Particularly, in order to minimize a kind of overhead caused by buffering, reordering, and reassembling under the circumstance where the incoming packet sequence is disrupted, MDPI adopts independent partial matching in the case dealing with pattern matching matrix. Consequently, we achieved the performance improvement of the amount of 61% and 50% with respect to TCAM method efficiency through several experiments where the average length of the Snort rule set was maintained as 9 bytes, and w=4 bytes and w=8bytes were assigned, respectively, Moreover, we observed the pattern scan speed of MDPI was 10.941Gbps and the consumption of hardware resource was 5.79LC/Char in the pattern classification of MDPI. This means that MDPI provides the optimal performance compared to hardware complexity. Therefore, by decreasing the hardware cost came from the increased TCAM memory efficiency, MDPI is proven the cost effective high performance intrusion detection technique.

• Atmosphere
• /
• v.26 no.1
• /
• pp.141-158
• /
• 2016

The objective of this study is to examine the impact of urban canopy and the horizontal resolution on simulated meteorological variables such as 10-m wind speed, 2-m temperature and precipitation using WRF model for a local, convective rainfall case. We performed four sensitivity tests by varying the use of urban canopy model (UCM) and the horizontal resolution, then compared the model results with observations of AWS network. The focus of our study is over the Seoul metropolitan area for a convective rainfall that occurred on 16 August 16 2015. The analysis shows that mean diurnal variation of temperature is better simulated by the model runs with UCM before the convective rainfall. However, after rainfall, model shows significant difference in air temperature among sensitivity tests depending on the simulated rainfall amount. The rainfall amount is significantly underestimated in 0.5 km resolution model run compared to 1.5 km resolution, particularly over the urban areas. This is due to earlier occurrence of light rainfall in 0.5 km resolution model. Earlier light rainfall in the afternoon eliminates convective instability significantly, which prevents occurrence of rainfall later in the evening. The use of UCM results in a higher maximum rainfall in the domain, which is due to higher temperature in model runs with urban canopy. Earlier occurrence of rainfall in 0.5 km resolution model is related to rapid growth of PBL. Enhanced mixing and higher temperature result in rapid growth of PBL, which provides more favorable conditions for convection in the 0.5 km resolution run with urban canopy. All sensitivity tests show dry bias, which also contributes to the occurrence of light precipitation throughout the simulation period.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.12
• /
• pp.51-59
• /
• 1993

A 4${\times}10^{19}cm^{3}$ carbon-doped base AlGaAs/GaAs HBY was grown using carbontetracholoride(CCl$_4$) by atmospheric pressure MOCVD. Abruptness of emitter-base junction was characterized by SIMS(secondary ion mass spectorscopy) and the doping concentration of base layer was confirmed by DXRD(double crystal X-ray diffractometry). Mesa-type HBTs were fabricated using wet etching and lift-off technique. The base sheet resistance of R$_{sheet}$=550${\Omega}$/square was measured using TLM(transmission line model) method. The fabricated transistor achieved a collector-base junction breakdown voltage of BV$_{CBO}$=25V and a critical collector current density of J$_{O}$=40kA/cm$^2$ at V$_{CE}$=2V. The 50$\times$100$\mu$$^2$ emitter transistor showed a common emitter DC current gain of h$_{FE}$=30 at a collector current density of JS1CT=5kA/cm$^2$ and a base current ideality factor of ηS1EBT=1.4. The high frequency characterization of 5$\times$50$\mu$m$^2$ emitter transistor was carried out by on-wafer S-parameter measurement at 0.1~18.1GHz. Current gain cutoff frequency of f$_{T}$=27GHz and maximum oscillation frequency of f$_{max}$=16GHz were obtained from the measured Sparameter and device parameters of small-signal lumped-element equivalent network were extracted using Libra software. The fabricated HBT was proved to be useful to high speed and power spplications.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.7
• /
• pp.1524-1531
• /
• 2004

This study analyzes a load balancing technique using Round Robin Algorithm. The study uses two software packages (Packet Capture and Round Robin Test Package) to check packet volume from Virtual Network structure (data generator, virtual server, Server1,2,3), and finds out traffic distribution toward Server1,2 and 3. The functions of implemented Round Robin Load Balancing Monitoring System include round robin testing, system monitoring, and graphical indication of data transmission and packet volume. As the result of the study shows, Round Robin Algorithm allows servers to ensure definite traffic distribution, unless incoming data loads differ much. Although error levels are high in some cases, they were eventually alleviated by repeated tests for a long period of time.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.3
• /
• pp.811-820
• /
• 1997

Disk arrays are using to enhance data trandfer rate and I/O performance in multimedia applications which need a high-performance storage device with large storage capacity and high-speed network.As performance varies with configuration and data layout scheme,disk array characteristic variables must be approrpriately deter-mined in desibning disk array archetecture for a speciffic applicatoin. In this paper,in order to design a disk array architecturte as a storage server of a small-scale VOD system,we evaluate performance of a disk array to chose the number of disks in the array,disk array cinfiguration,a degree of declustering for a given data block size of continous media file system and I/D request size through simulation.Simulation result shows that RAID level 5 with 5 disks ios a suitable candidate for the disk array architecture which privides MPEG-2 files with a rate of 6 Mbps,Moreover,we whow that stripe unit is 64 KB and a layout scheme is contigous placement.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.46 no.6
• /
• pp.73-79
• /
• 2009

For the shake of control for movement object, control theory like neural network, nonlinear model predictive control(NMPC) is realized on digital high speed computer. Predictor of flight control system(FCS) based nonlinear model predictive control has to be satisfied with response for hard real-time to perform applications on each module in the FCS. Simultaneously, It gives a serious consideration accuracy to give full play to FCS's performance. Error of mathematical aspect affects realization of whole algorithm. But factors of bring mathematical error is not considered to calculate final accuracy on parameter of predictor. In this paper, Predictor was made using load control model on the digital computer for design FCS at hard real-time and is shown response time on realization algorithm. And is shown realization algorithm of high effective predictor over the accuracy. The predictor was realized on the load control model using Euler method, Heun method, Runge-Kutta and Taylor method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.1
• /
• pp.118-130
• /
• 2013

With the advent of a new services environment based on high-speed mobile networks and high-performance mobile devices, users in real life require content-centric services that provide personalized information conveniently and efficiently. These services are defined as ambient services. To implement and support sustainable ambient services, there is a critical need to conduct research regarding practicable models and methodologies. This paper proposes an effective model for ambient services based on the personalization of real-life space. The model consists of Public Info-space, Universal Info-space and Private Info-space. We also show a methodology for implementing the model with currently available techniques in order to prove that the model and methodology constitute an applicable solution to developing true ambient services. Finally, a kind of role-playing game which is built on a real university campus is presented to show the model to be available, where the test bed infrastructure consists of wireless mesh networks and real-time location systems (RTLSes).

• Journal of Biomedical Engineering Research
• /
• v.25 no.6
• /
• pp.617-621
• /
• 2004

In recent, researchers in the field of Bioinformatics need to analyze thousands of genome sequences efficiently according to introduce of new analysis methods and technologies such as genome expression microchip. This rapid growth in the field of bio-engineering needs computing resources to analyze rapidly for genome sequences, but it does not introduce the computing resources due to an enormous investment expense. The core factor of this study is integrated environment based PC-Cluster system & high speed access rate up to 155Mbps, continuous collection system for bio-information at home and abroad. The results of the study are establishment & stabilization of information and communication infrastructure, establishment & stabilization of high performance computer network up to 155Mbps, development of PC-Cluster system with 32 nodes, a parallel BLAST on Cluster system, which can provides scalable speedup in terms of response time, and development of collection & search system for bio-information.

• Journal of radiological science and technology
• /
• v.28 no.2
• /
• pp.129-135
• /
• 2005

IT communication industries of current society are developed in enormous growth, our country leading the world in the number of super high speed internet equipments in use. In the pride oneself on communication network of those, mobile terminal technology and wireless phone production hold a high rank. Data communication and networking may be the fastest growing technologies in our culture today. In this way, IT fields conjugated in the daily quick, the fact that department of radiological science didn't discharged one's duties on current IT education. The curriculum of radiological technologists that play an important part between skill and occupation's education as major and personality didn't performed one's part most effectively on current IT environments and digital radiological equipments interface. Therefore, in this paper current curriculum of radiological science are catched hold of trend and problems on digital radiology environments, on fact the present state of problems, for radiological engineering and HIS manager, new curriculum course are suggested a reform measure of culture and major education curriculum introduction.

• Journal of the Korean Society for Railway
• /
• v.18 no.6
• /
• pp.578-585
• /
• 2015

Track elastic components can be technically and economically efficient when integrated well into track superstructure of a railway network. In such cases, the elastic rail pad is larger than a 800m radius curve provides smooth rail branching and allows for high-speed operation ($V{\geq}160km/h$). High track resistance causes the tamping intervals to stand out because the constantly increasing share of the sleeper pad further extends the increase of the tamping interval and the long grinding period; the engineering and construction of the small curve radius track provides some measures for reducing the solid sounds. Installation of elastic mats under the ballast can have a good effect, particularly in the context of protection against dust during construction or extensive renovation measures when laying new lines. However, such a process requires special attention and proper installation.