• Resources Recycling
• /
• v.19 no.6
• /
• pp.43-50
• /
• 2010

The crisis of energy gives rise to the growing concerns over continuing uncertainty in the energy market. Under these circumstances, there are also increasing interests on coals. In particular, Low Rank Coal (LRC) is receiving gradual attentions from green industry. But due to is high moisture content range from 30 - 60%, drying process has to be preceded before being utilized as power plant. In this study drying kinetics of LRC is induced by using a fixed-bed reactor. The drying kinetics was evaluated in from of the particle size, the inlet gas temperature, the drying time, the gas velocity, and the LID ratio. The consideration of the reynold's number was taken for correction of gas velocity, particle size and LID was taken for correction of reactor diameter, packing height of coal. As being seen as characteristic of drying coal, it can be found that fixed-bed reactor can contributed to active drying of free water. In this sense, it could be considered that phase boundary reaction is appropriate mechanism.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.3
• /
• pp.21-30
• /
• 2005

The purpose of this study is helps to make full use for perfect performance by grasping the defects of Tichonkich motion performed by athlete CSM For this, the study analyzed kinematical variables through Tichonkich motions performed at the first selection competition(1st trial) and final selection competition(2nd trial) for the dispatch to the 28th Athens Olympic Games using the three-dimensional cinematographical method with a high-speed video camera, and obtained the following results. 1. During Tichonkich motion, the execution time of up swing and the right hand moving to the left bar was shorter in the 2nd trial than the 1st one, while the execution time of down swing, the support of the left bar and the right hand moving to the right bar was longer in the 2nd trial than the 1st trial. 2. The horizontal position of COG in the 2nd trial was -35cm in the 1st stage, 42cm in the 3rd stage and 29cm in the 4th stage, that is, it showed a great swing focused on the circular movement compared to the 1st trial, while the vertical position of COG was -59cm in the 2nd stage, that is, it showed a small swing focused on a up and down movement. Also the 5th stage vertical position was 98cm, and the 6th stage vertical position was 95cm in the 2nd trial which were higher than those of the 1st trial, so it has provided magnificence required in the modern gymnastics. 3. And it was indicated that the horizontal velocity at the down swing phase proceeded forward more rapidly in the 2nd trial than that in the 1st trial, and the reverse ascent made a rapid vertical rise lessening left and right velocity change. And in the 5th stage, the 2nd trial was kept very slower in horizontal, vertical and left and right velocity that in the 1st trial, so it reached a handstand with leisurely movement. 4. In the 2nd trial, shoulder joint of the 1st, 2nd, 3rd stages kept a larger angle than that in the 1st trial, that is, it made a great swing while in the 1st trial, it showed a swing movement dependent on kick movement by the flexion and extension of hip joint. Also in the 2nd trial, the body formed a vertical posture with both hands supporting the left bar and hip joint was kept larger as $198^{\circ}$ and $190^{\circ}$ in the 5th and 6th stage than that in the 1st trial, so it made a handstand with the body uprightly stretched out, and magnificent and stable movement.

• Journal of Korean Society of Steel Construction
• /
• v.15 no.6 s.67
• /
• pp.683-691
• /
• 2003

Recently, the steel has been increaseingly used as an integrated part of high-rise buildings, which often composed of steel structures, steel reinforced concrete structures and composite structures. The steel base is designed to transfer the stresses induced from steel column to the reinforced concrete footing through the base plate. However, in the design of steel structures and steel reinforced concrete structure, it is generally difficult to evaluate the bearing strength of the steel base subjected to large axial force. Furthermore, the material used in steel base is quite different from those used in other connections and a load transferring mechanism of steel base is very complicated in nature. Therefore, a special attention must be placed in design and construction of steel base. In generally, the bearing strength test and research of the steel base subjected to concentrated load are carried out. But, in the design of the structures, uniaxial eccentric load is loaded to the steel base of the steel structures. In this research, the bearing strength and the me of failure considering eccentric loads and eccentric length, were experimented when eccentric load is loaded to the steel base of steel structures. Based on the test results, a basic design reference is suggested for a reasonable design of steel structures, steel reinforced concrete structures and composite structures.

• Journal of the Korean Vacuum Society
• /
• v.12 no.4
• /
• pp.239-250
• /
• 2003

The reliability degradation phenomena in the SiGe hetero-junction bipolar transistor (HBT) are investigated in this review. In the case of the SiGe HBT the decrease of the current gain, the degradation of the AC characteristics, and the offset voltage are frequently observed, which are attributed to the emitter-base reverse bias voltage stress, the transient enhanced diffusion, and the deterioration of the base-collector junction due to the fluctuation in fabrication process, respectively. The reverse-bias stress on the emitter-base junction causes the recombination current to rise, increasing the base current and degrading the current gain, because hot carriers formed by the high electric field at the junction periphery generate charged traps at the silicon-oxide interface and within the oxide region. Because of the enhanced diffusion of the dopants in the intrinsic base induced by the extrinsic base implantation, the shorter distance between the emitter-base junction and the extrinsic base than a critical measure leads to the reduction of the cut-off frequency ($f_t$) of the device. If the energy of the extrinsic base implantation is insufficient, the turn-on voltage of the collector-base junction becomes low, in the result, the offset voltage appears on the current-voltage curve.

• Journal of Korea Water Resources Association
• /
• v.50 no.11
• /
• pp.769-779
• /
• 2017

As the occurrence of drought is recently on the rise, the reliable drought forecasting is required for developing the drought mitigation and proactive management of water resources. This study developed a probabilistic hydrological drought forecasting method using the Bayesian Networks and drought propagation relationship to estimate future drought with the forecast uncertainty, named as the Propagated Bayesian Networks Drought Forecasting (PBNDF) model. The proposed PBNDF model was composed with 4 nodes of past, current, multi-model ensemble (MME) forecasted information and the drought propagation relationship. Using Palmer Hydrological Drought Index (PHDI), the PBNDF model was applied to forecast the hydrological drought condition at 10 gauging stations in Nakdong River basin. The receiver operating characteristics (ROC) curve analysis was applied to measure the forecast skill of the forecast mean values. The root mean squared error (RMSE) and skill score (SS) were employed to compare the forecast performance with previously developed forecast models (persistence forecast, Bayesian network drought forecast). We found that the forecast skill of PBNDF model showed better performance with low RMSE and high SS of 0.1~0.15. The overall results mean the PBNDF model had good potential in probabilistic drought forecasting.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.20 no.2
• /
• pp.61-67
• /
• 2010

The bivoltine tropical tasar ecoraces of Antheraea mylitta Drury produces cocoons for seed production under seed crop rearing (July-August with $22{\sim}30^{\circ}C$ temperature and 50~70% relative humidity) and for silk production under commercial crop rearing (September-December with $17{\sim}27^{\circ}C$ temperature and 60~80% relative humidity). To consider the impact of hybrid vigour on egg, larva, cocoon and silk related commercial traits, the $F_1$ hybrids made among Daba, Jata and Raily ecoraces were assessed successively for three years. The hybrid vigour in the $F_1$ hybrid of Daba$\times$Jata ($T_7$) was positive for egg fertility (+23.1%), shell weight (+25.6%), silk yield (+79.0%) and filament length (+68.1%), with filament of high denier (11.98d) and reduced larval span (-7.1%). The Jata$\times$Daba ($T_8$) hybrid has shown negative heterosis in egg fertility (-8.0%) compared to the other F1 hybrids, Daba$\times$Raily ($T_9$) and Raily$\times$Daba ($T_{10}$), when they rise simultaneously during the commercial crop season. The better performance of parental ecoraces ($T_4$ to $T_6$) in their commercial traits during commercial crop over parents of seed crop ($T_1$ to $T_3$) and the superior performance of $F_1$ hybrids ($T_7$ to $T_{10}$) over parents of commercial crop ($T_4$ to $T_6$) during commercial crop season indicates the apparent hybrid vigour in tasar $F_1$ hybrids. As the Daba$\times$Jata ($T_7$) and Jata$\times$Daba ($T_8$) $F_1$ hybrids have shown highest hybrid vigour, their rearing during commercial crop can optimize the silk productivity and commercial sustenance of the tasar silk industry.

• Journal of Internet Computing and Services
• /
• v.10 no.2
• /
• pp.1-13
• /
• 2009

Intrusion detection is a process that identifies the attacks and responds to the malicious intrusion actions for the protection of the computer and the network resources. Due to the fast development of the Internet, the types of intrusions become more complex recently and need immediate and correct responses because the frequent occurrences of a new intrusion type rise rapidly. Therefore, to solve these problems of the intrusion detection systems, we propose a sequential pattern miner for analysis of the alert data in order to support intelligent and automatic detection of the intrusion. Sequential pattern mining is one of the methods to find the patterns among the extracted items that are frequent in the fixed sequences. We apply the prefixSpan algorithm to find out the alert sequences. This method can be used to predict the actions of the sequential patterns and to create the rules of the intrusions. In this paper, we propose an extended prefixSpan algorithm which is designed to consider the specific characteristics of the alert data. The extended sequential pattern miner will be used as a part of alert data analyzer of intrusion detection systems. By using the created rules from the sequential pattern miner, the HA(high-level alert analyzer) of PEP(policy enforcement point), usually called IDS, performs the prediction of the sequence behaviors and changing patterns that were not visibly checked.

• Korean Journal of Food Science and Technology
• /
• v.7 no.3
• /
• pp.115-119
• /
• 1975

Imported seaweeds Gracilaria sp. and Gelidium sp. from the Philippines and Gracilaria sp. from Brazil were subjected to the examination of yield and quality of agar according to various pretreatment conditions. As pretreatment condition for alkali-treated Gracilaria sp. from the Philippines, $0.05{\sim}0.1%$ concentration of sulfuric acid was proper to obtain the higher yield of agar for which a reverse proportionality was shown between the acid concentration and the strength of extraction condition. Highest yield from Gelidium sp. from the Philippines was obtained by pretreating with 5% sodium hydroxide at $90^{\circ}C$ for one hour, followed by 0.1% sulfuric acid treatment. Gracilaria sp. from Brazil gave the highest yield of agar by pretreatments with 1% sodium hydroxide followed by 0.05% sulfuric acid, both at room temperature for one hour. Acid treatment of alkali-treated Gracilaria sp. from the Philippines brought about the decrease of total nitrogen, total sulfur and crude ash, the increase of jelly strength and no marked change in gelation point and gelation ability. In general, acid-treatment conditions to give rise to high yield of agar improved the quality of product.

• Fire Science and Engineering
• /
• v.26 no.4
• /
• pp.48-54
• /
• 2012

In order to study on the evacuation risk when connate fires caused by vertical fire spread of the exterior occurs, the egress simulations based on the relevant scenarios has carried out. As a result of it, ASET (permitted evacuation time) was reached in between 550 to 650 seconds in entire floors after vertical smoke spread from fire of combustible exteriors. In particular, ASET was 358 seconds in the first floor, 490 seconds in the six floor and 473 seconds in the tenth floor. In addition, five floors of all levels, the 1st floor, the 6th floor and the 28th floor ~30th floor, show RSET (minimum evacuation time) which is bigger than ASET as evacuation risk. This result presents occupants in high rise buildings with more than 15 floors might not be able to egress of them using staircases due to huge population attempting to evacuate simultaneously. Particularly, 699 people in the upper levels by smoke from the first floor are having difficulty escaping this building since ASET on the first floor adjacent to the ignition point was 358 seconds which is relatively reached fast. Considering a prevention method of the fire and smoke spread, architects have to use non-combustible exterior in the building's facade to be required as an active fire protection system.

• Horticultural Science & Technology
• /
• v.34 no.3
• /
• pp.414-423
• /
• 2016

Growers in plug seedling production think that root media in which rockwool is a component has given rise to several environmental problems. Therefore, the demand for new materials as a substitute for rockwool has been increased. This study examined the possibility of cultivation of tomato plug seedlings using a newly developed growing medium with phenolic foam. Plug seeds of tomato cultivar 'Madison' were sown in four pellet-type growing media: Grodan rockwool (GRW), UR rockwool (URW), phenolic foam LC (LC) or phenolic foam LC-lite (LC-lite). Then, the seedlings were transplanted to the four cube-type growing media 19 days after sowing. Seeds were germinated in a growth chamber ($25{\pm}2^{\circ}C$, 80% relative humidity, and dark) for 4 days and then the seedlings were grown with a nutrient solution supplied by an overhead irrigation system in a greenhouse. Plant height, number of leaves, leaf area, and fresh or dry weight of tomato seedlings were the greatest for the seedlings transplanted to URW cube media after being grown on LC-lite pellets. Root grade was the greatest for the seedlings transplanted on LC or LC-lite cube media after being grown on LC pellets. Chemical properties of all media tested for tomato growth were maintained within a stable range, while physical properties of URW showed high values in container capacity, air space, and total porosity. These results demonstrated that the phenolic foam media were effective for seedling growth and can substitute for rockwool as a root medium.