• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.3
• /
• pp.297-306
• /
• 1992

Algorithms for implementing one chip binary image processor has been studied. In this paper, image quality improvement algorithms, for the data pre-processed with shading and gamma correction after digitizing the analog signal from CCD or CIS, such as : Improved high quality binarization algorithm is suggested. Error diffusion algorithms for high quality half-tone images is analyzed, Fuzzy Theory based mixed mode algorithm is suggested.

• 한국약용작물학회:학술대회논문집
• /
• 2006.11a
• /
• pp.139-145
• /
• 2006

Kaneka Corporation (Kaneka) has been manufacturing CoQ10 under GMP regulation since 1977. Kaneka has a sophisticated quality control system and has been supplying high quality CoQ10 materials to the worldwide customers (Kaneka CoQ10) for about 30 years. Kaneka CoQ10 is characterized by a lot of safety data, which are derived from clinical trials with healthy volunteers (single-dose and 4-week multi-dose safety studies), animal studies (13-week sub-chronic study in dogs and 52-week chronic study in rats), three types of mutagenicity test, six type of skin irritation test (for cosmetics), and others. The risk assessment of CoQ10 was performed by Council for Responsible Nutrition (USA). They reviewed many of available clinical data including clinical trials using Kaneka Q10, and concluded that the upper level for supplements (ULS) of CoQ10 is 1,200mg/day (Hathcock and Shao. 2006, Regulatory Toxicology and Pharmacology, $\underline{45}$, 282 - 288).

• Smart Structures and Systems
• /
• v.1 no.2
• /
• pp.121-140
• /
• 2005

This paper presents a systematic investigation of the effect of sensor location on the data quality and subsequently, on the effectiveness of machine health monitoring. Based on an analysis of the signal propagation process from the defect location to the sensor, numerical simulations using finite element modeling were conducted on a bearing test bed to determine the signal strength at several representative sensor locations. The results showed that placing sensors closely to the machine component being monitored is critical to achieving high signal-to-noise ratio, thus improving the data quality. Using millimeter-sized piezoceramic plates, the obtained results were evaluated experimentally. A comparison with a set of commercial vibration sensors verified the developed structural dynamics-based sensor placement strategy. It further demonstrated that the proposed shock wave-based sensing technique provided an effective alternative to vibration measurement, while requiring less space for sensor installation.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.22 no.3
• /
• pp.194-204
• /
• 2020

Cultivar parameters, which are key inputs to a crop growth model, have been estimated using observation data in good quality. Observation data with high quality often require considerable labor and cost, which makes it challenging to gather a large quantity of data for calibration of cultivar parameters. Alternatively, data in sufficient quantity can be collected from the reports on the evaluation of cultivars by region although these data are of questionable quality. The objective of our study was to assess the quality of crop and management data available from the reports on the regional adaptation trials for rice cultivars. We also aimed to propose the measures for improvement of the data quality, which would aid reliable estimation of cultivar parameters. DatasetRanker, which is the tool designed for quantitative assessment of the data for parameter calibration, was used to evaluate the quality of the data available from the regional adaptation trials. It was found that these data for rice cultivars were classified into the Silver class, which could be used for validation or calibration of key cultivar parameters. However, those regional adaptation trial data would fall short of the quality for model improvement. Additional information on management, e.g., harvest and irrigation management, can increase the quantitative quality by 10% with the minimum effort and cost. The quality of the data can also be improved through measurements of initial conditions for crop growth simulations such as soil moisture and nutrients. In addition, crop model improvement can be facilitated using crop growth data in time series, which merits further studies on development of approaches for non-destructive methods to monitor the crop growth.

• Journal of Korean Society for Quality Management
• /
• v.45 no.4
• /
• pp.917-932
• /
• 2017

Purpose: This study aims to identify the most important quality construct among system quality, information quality, and service quality, which are integrated as the second-order construct; perceived quality, and to investigate the relationship between perceived quality, learner satisfaction, learner enjoyment, switching cost, and learner loyalty. Method: Data were collected from learners who had taken e-learning course, and the analysis was conducted in two phases. The first phase described demographic characteristics using SPSS23.0; the second phase involved the second order CFA of perceived quality and the analysis of measurement model and structural model through AMOS 23.0. Results: (1) The explanatory power of system quality, information quality, and service quality appears to be almost equal; (2) Perceived quality positively influences only both learner satisfaction and switching cost; (3) Only learner satisfaction positively influences learner loyalty and switching cost negatively influences learner loyalty. Conclusion: Learner enjoyment does not play an important role in this study, which could be extrapolated in regard to the characteristics of sample. The respondents are over high school students, who emphasize on the acquisition of knowledge rather than enjoyment. Additionally, the result implies that respondents show low loyalty in the high switching cost.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.1
• /
• pp.192-196
• /
• 2010

Due to a development of a modem technology as Power Line Communication(PLC) over 200 Mbps, the high-speed multi-media data trasmission could be currently possible. The strength of the PLC has no more additional wiring work. PLC has also possible to high quality data transmission with currently electrical cable. It has a various strong point campare with existing wire and wireless communication technologies. In This paper we develop a high quality media transmitter-receiver based on merging the HomePlug AV, which is 200 Mbps class PLC technology and HDMI Interface technology. The video function was used for the VEDEO TEST GENERATOR in order to a property valuation. Smart Live 6 software were used for the assessment of audio property. As the result of measurement of the HD class images by capturing from the receiver of the PLC, the quality of images couldn't be confirm any deterioration, which has compared with original reflections. In case of audio part as the result of confirmation of the Phase, Magnitude, it has been confirmed that over 90% of nomal transmition and receiving of acoustic signal. It can be possible to have HD class Media service through the PLC.

• The KIPS Transactions:PartC
• /
• v.12C no.6 s.102
• /
• pp.901-906
• /
• 2005

In this paper, we propose a novel MHCOC (Mapped High Capacity Orthogonal Code) SS(Spread Spectrum) technique that reduces high PAPR (Peak power to Average Power Ratio) of HCOC SS system which was proposed to support high data rate transmission, and we compare to the conventional modulation technique such as MQAM SS that can transmit the same number of symbols at the same time. Moreover, we study on adaptation of this system to satisfy QoS (Quality of Service) that services the proper data rate according to the propagation channel quality information. We perform computer simulation to verify the performance of the proposed system and analyze its availability.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.51 no.1
• /
• pp.29-36
• /
• 2002

It is required that the current state of system should be Precisely monitored for efficient and safe operation of the subway power system and it is an important Problem to secure the high quality data for state estimation. The current state of subway power system is estimated by using data transmitted to control center from every measuring instrument. The high accuracy and trust can be maintained if the measured data have a high quality. But it is difficult to estimate the accurate state of system because of the noises in transmitted data and the inaccuracy of measuring instruments. So the object is to reduce the difference between the real values and the measured values in order to improve considerably the inaccuracy due to Instrumental errors and transmission noises using the state estimation method. In this paper, we proposes a new state estimation to estimate the accurate state of the subway power system from the measured values of a Sang-In station in Daegu subway and consider the possibility of application to the real subway power system. on the basis of that. The simulation results show to make sure of the possibility to apply to the real system usefully.

• Genomics & Informatics
• /
• v.17 no.3
• /
• pp.32.1-32.6
• /
• 2019

Currently, Illumina sequencers are the globally leading sequencing platform in the next-generation sequencing market. Recently, MGI Tech launched a series of new sequencers, including the MGISEQ-2000, which promise to deliver high-quality sequencing data faster and at lower prices than Illumina's sequencers. In this study, we compared the performance of two major sequencers (MGISEQ-2000 and HiSeq 4000) to test whether the MGISEQ-2000 sequencer delivers high-quality sequence data as suggested. We performed RNA sequencing of four human colon cancer samples with the two platforms, and compared the sequencing quality and expression values. The data produced from the MGISEQ-2000 and HiSeq 4000 showed high concordance, with Pearson correlation coefficients ranging from 0.98 to 0.99. Various quality control (QC) analyses showed that the MGISEQ-2000 data fulfilled the required QC measures. Our study suggests that the performance of the MGISEQ-2000 is comparable to that of the HiSeq 4000 and that the MGISEQ-2000 can be a useful platform for sequencing.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.11a
• /
• pp.137-140
• /
• 1998

An active-matrix LCD using thin film transistors (TFT) has been widely recognized as having potential for high-quality color flat-panel displays. Pixel-Design Array Simulation Tool (PDAST) was used to profoundly understand the gate si후미 distortion and pixel charging capability. which are the most critical limiting factors for high-quality TFT-LCDs. Since PDAST can simulate the gate, data and pixel voltages of a certain pixel on TFT array at any time and at any location on an array, the effect of the resistivity of gate line material on the pixel operations can be effectively analyzed. The gate signal delay, pixel charging ratio and level-shift of the pixel voltage were simulated with varying the parameters. The information obtained from this study could be utilized to design the larger area and finer image quality panel.