• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.12
• /
• pp.1049-1055
• /
• 2007

Lots of integration work has been done in order to miniaturize the devices for communication. To do this work, one of key work is to get miniaturized inductor with high Q factor for RF circuitry. However, it is not easy to get high Q inductor with silicon based substrate in the range of GHz. Although silicon is well known for its good electrical and mechanical characteristics, silicon has many losses due to small resistivity and high permittivity in the range of high frequency. MEMS technology is a key technology to fabricate miniaturized devices and LTCC is one of good substrate materials in the range of high frequency due to its characteristics of high resistivity and low permittivity. Therefore, we proposed and studied to fabricate and analyze the inductor on the LTCC substrate with MEMS fabrication technology as the one of solutions to overcome this problem. We succeeded in fabricating and characterizing the high Q inductor on the LTCC substrate and then compared and analyzed the results of this inductor with that on a silicon and a glass substrate. The inductor on the LTCC substrate has larger Q factor value and inductance value than that on a silicon and a glass substrate. The values of Q factor with the LTCC substrate are 12 at 3 GHz, 33 at 6 GHz, 51 at 7 GHz and the values of inductance is 1.8, 1.5, 0.6 nH in the range of 5 GHz on the silicon, glass, and LTCC substrate, respectively.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.2
• /
• pp.62-66
• /
• 2010

In this article, a oscillator at X-band with a double H-shape metamaterial resonator (DHMR) based on high-Q is proposed with metamaterial structure to improve Ihe phase noise and output power. The proposed oscillator is required low phase noise and high output power for the high performance frequency synthesizer. DHMR is designed to be high-Q at resonance frequency through strong coupling of E-field. This character makes phase noise excellent. The oscillator using DHMR is oscillated in X-band so as to apply frequency synthesizer of radar systems. The output power is 4.33 dBm and the phase noise is -108 dBc/Hz at 100 kHz offset of carrier frequency.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.6
• /
• pp.1324-1329
• /
• 2013

The WiMedia Alliance has specified a Distributed Medium Access Control (D-MAC) protocol based on UWB for high speed wireless home networks and WPANs. In this paper, firstly, the fair SoQ-based Distributed Reservation Protocol (DRP) for D-MAC is analyzed. And a novel SoQ-based relay transmission protocol is proposed to overcome DRP conflicts fast. In the proposed protocol, each device executes the Satisfaction of QoS (SoQ) time slot allocation algorithm independently. And, in order to give the loser device due to DRP conflicts another chance to maintain QoS resources, the proposed relay transmission protocol helps the device reserve another indirect link maintaining the required QoS resources via a relay node.

• Progress in Superconductivity
• /
• v.1 no.1
• /
• pp.36-41
• /
• 1999

Methods for mode identification and accurate measurements of the unloaded Q ($Q_0$) of a dielectric-loaded $TE_{01{\delta}}$ mode cavity resonator with HTS endplates are proposed. A resonator with a sapphire rod and $YBa_2Cu_3O_{7-x}$(YBCO) endplates was prepared and its microwave properties were studied at temperatures above 30 K. The $TE_{01{\delta}}$ mode $Q_0$ of the resonator, designed to work as a tunable resonator with variations in the gap distance (s) between the sapphire rod and the top YBCO, was more than 1000000 at s = 0 mm and at 30 K with the resonant frequency of 19.56 GHz. The $TE_{01{\delta}}$ mode $Q_0$ decreases as s increases for s < 2 mm until mode couplings between the $TE_{01{\delta}}$ mode and other modes appeared at s = 2 mm. Significant dependence of the $TE_{01{\delta}}$ mode $Q_0$ on the input and output coupling constants was also observed. Applications of the open-ended $TE_{01{\delta}}$ mode cavity resonator for a tunable resonator with a very high Q as well as a characterization tool for the surface resistance measurements of HTS films are described.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.33 no.4
• /
• pp.343-349
• /
• 1988

In order to get informations for breeding early barley cultivars, the thermosensitivity and low temperature growth ability about the breeding materials vernalized were tested at the high '||'&'||'amp; low temperature and field conditions. The temperature coefficient (Q10), ratio and thermosensitivity for plant height were various among cultivars versus temperature treatments. The early cultivars had greater Q10 values and insensitive responses to temperature changes. The Q10 and thermosensitivity for the time of flag leaf unfolding were various among cultivars, but the coefficient of variation in the thermosensitivity was greater, so the character would be more useful for investigating the varietal differences. The Q10 and thermosensitivity for plant height were not significantly correlated with Q10 and thermosensitivity for the time of flag leaf unfolding. The periods from heading to flowering were 2 to 4 days at the high temperature plot, but 1 to 11 days at the low temperature plot, showing much greater variations. In general the cultivars with greater difference of heading time between the high and low temperature plots were Suwon 218, SB 76588, Oweolbori, and Jogangbori, showing the sensitive thermophase and early heading.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.12
• /
• pp.1021-1027
• /
• 2018

Experimental studies have been conducted to verify that the positive coupling between pressure oscillation (p') and combustion oscillation (q') of high frequency range is a prerequisite for the initiation of low frequency instability in hybrid rocket combustion. The post-chamber length and combustion equivalence ratio were selected as critical parameters to control the phase difference between p' and q', and p' amplitude in relation to the suppression of LFI. In the results, even if the post-chamber length increases, the phase difference between p' and q' maintains below pi/2, which is a necessary condition for the LFI development, but the amplification of RI (Rayleigh index) was substantially decreased leading to a stable combustion. In addition, results confirmed that combustion stability is achieved by changing the momentary equivalence ratio and/or by suppressing the positive coupling status of p' and q'. Thus, the periodic amplification of RI was identified as the middle path of the mechanism of occurrence of LFI.

• The Pure and Applied Mathematics
• /
• v.24 no.2
• /
• pp.69-77
• /
• 2017

If q(z) is a polynomial of degree n with all zeros in the unit circle, then the self-reciprocal polynomial $q(z)+x^nq(1/z)$ has all its zeros on the unit circle. One might naturally ask: where are the zeros of $q(z)+x^nq(1/z)$ located if q(z) has different zero distribution from the unit circle? In this paper, we study this question when $q(z)=(z-1)^{n-k}(z-1-c_1){\cdots}(z-1-c_k)+(z+1)^{n-k}(z+1+c_1){\cdots}(z+1+c_k)$, where $c_j$ > 0 for each j, and q(z) is a 'zeros dragged' polynomial from $(z-1)^n+(z+1)^n$ whose all zeros lie on the imaginary axis.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.623-626
• /
• 2002

The object of present study is to find the flow characteristics of centrifugal turbomachinery according to the volute shape change. The experiments were carried out for two model; volute-A designed by free vortex conditions and volute-B designed for use in high mass flow rate conditions using the volute-A test results, Flow measurements were taken in shrouded impeller with 12 backward type blades by using a five-hole pilot-tube and carried out in 4 flow rate, $Q/Q_d\;=0,43,\;1.0,\;1.27,\;1,47$, respectively, For volute-B, we found that pressure distribution was more uniform at high flow rate and from $Q/Q_d\;:\;0,43\;to\;Q/Q_d\;:\;1,20$, losses decreased and efficiency increased compare with volute-A.

• Journal of Korean Home Economics Education Association
• /
• v.33 no.3
• /
• pp.1-22
• /
• 2021

The purpose of this study is to examine high school students' perception of male home economics teachers and identify diverse viewpoints. To this end, the Q method was used, which is useful for operant subjectivity studies in which research participants create their own opinions and viewpoints. Based on the general procedures of the Q method, this study finalized 40 statements comprised of the representational system of high school students on male home economics teachers, which are Q samples, from the Q population. The statements were Q-sorted by P samples comprised of 31 high school seniors and analyzed using the QUANL program. The results showed that there were 4 different viewpoints of high school students on male home economics teachers. The type 1 focused on individual traits, claiming that the 'male' gender of home economics teachers and the 'home economics' subject are merely individual traits of the teachers. The type 2 focused on the subject, perceiving male home economics teachers with focus on the subject of home economics. The type 3 focused on competencies, thinking that male home economics teachers have sufficient skills and competencies to teach home economics. Finally, the type 4 focused on character, valuing the character of the teachers and thinking that male home economics teachers are great teachers who took up the challenge of teaching home economics. This study has significance as it provides the basic data for in-depth understanding of students' perception of male home economics teachers in individual context.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.7 s.337
• /
• pp.63-70
• /
• 2005

We investigated the phase noise of an oscillator with a extremely high-Q resonator used as the resonant element. A TE$_{011}$ mode rutile-loaded resonator with high-temperature superconductive (HTS) $YBa_2Cu_3O_{7-\delta}$(YBCO) films used as the endplates is prepared for this purpose. At 23.5 K, the unloaded Q and the loaded Q are 863000 and 180000, respectively. The phase noise of -104.8 dBc/Hz at 1 KHz offset was observed for the oscillator having a resonator with $Q_{L}$ =180000 at the $TE_{01\delta$ mode resonant frequency of 8.545 GHz at 23.5 K Such oscillators with very low phase noise are expected to be used for building up communication systems capable of efficient use of the frequency band and high-speed data transmission as well as for Doppler radars. Frequency tuning could be realized for the resonator by using a piezoactuator Applicability of the tunable rutile resonator for fabricating tunable oscillators of high performances is discussed.