• 전력전자학회논문지
• /
• 제4권3호
• /
• pp.304-309
• /
• 1999

본 논문에서는 새로운 24펄스 다이오드 정류기 시스템을 제안한다. 제안하는 다이오드 정류기 시스템은 기존의 직렬형 12펄스 다이오드 정류기에 수동의 보조회로를 추가함으로서 구성되어지고, 입력전류는 제 22차까지의 고조파가 제거되어 거의 정현파에 가까운 전류 파형을 얻는다. 또한, 출력 전압은 n=24k, k=1,2,3... 의 고조파 성분을 갖는 24펄스 특성를 나타낸다. 더욱이, 이 보조회로의 용량은 출력용량에 비하여 매우 작으며, 능동 스위칭소자를 사용하지 않으므로 외란에 강하고 구현이 간단하다. 따라서, 본 방식은 중·대용량급의 고전압 비제어(uncontrolled) 직류전원이 필요한 인버터나 무정전 전원장치등의 앞단에서 입력고조파의 저감에 경제적이고 효율적이다. 220V, 3KVA 정류기 시스템의 실험을 통하여 제안한 시스템의 타당성을 검증하였다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제4권1호
• /
• pp.61-65
• /
• 2002

It becomes difficult and high in cost to construct new ducts and/or tunnels for power cables in metropolitan areas. This paper presents possible applications of an HTS superconducting power cables for transmitting electric power in metropolitan areas. Reflected were its important distinction such as compactness for installation in underground ducts and considerably high efficiency compared with present underground cables. In this paper, system modeling, transmission capacity and voltage class of compact HTS cables which should be applied to existing ducts were reviewed. Based on this, the following items on urban transmission system are examined. (1) A method of constructing a model system to introduce high temperature superconducting cables to metropolitan areas is presented. (2)The maximum outer diameter of HTS cables to be accommodated in exiting ducts is calculated based on the design standards for current cable ducts. (3)The voltage level that can be accommodated by existing ducts is examined.

• Journal of Electrical Engineering and Technology
• /
• 제9권1호
• /
• pp.205-213
• /
• 2014

A wind generator (WG) maximum power point tracking (MPPT) system is presented here. It comprises of a variable-speed wind generator, a high-efficiency boost-type dc/dc converter and a control unit. The advantages of the aimed system are that it does not call for the knowledge of the wind speed or the optimal power characteristics and that it operates at a variable speed, thus providing high efficiency. The WG operates at variable speed and thus suffers lower stress on the shafts and gears compared to constant-speed systems. It results in a better exploitation of the available wind energy, especially in the low wind-speed range of 2.5-4.5 m/s. It does not depend on the WG wind and rotor-speed ratings or the dc/dc converter power rating. Higher reliability, lower complexity and cost, and less mechanical stress of the WG. It can be applied to battery-charging applications.

• Journal of Power Electronics
• /
• 제8권1호
• /
• pp.51-59
• /
• 2008

This paper addresses several issues concerning the analysis, design, modeling, simulation and development of single-phase, single-switch, power factor corrected AC-DC high frequency switching converter topologies with transformer isolation. A detailed analysis and design is presented for single-switch topologies, namely forward buck, flyback, Cuk, Sepic and Zeta buck-boost converters, with high frequency isolation for discontinuous conduction modes (DCM) of operation. With an awareness of modem design trends towards improved performance, these switching converters are designed for low power rating and low output voltage, typically 20.25W with 13.5V in DCM operation. Laboratory prototypes of the proposed single-switch converters in DCM operation are developed and test results are presented to validate the proposed design and developed model of the system.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2009년도 정기총회 및 추계학술대회 논문집
• /
• pp.228-230
• /
• 2009

본 논문에서는 전류형 인버터(CSI)와 전압형 인버터(VSI)를 조합하여 유도성 부하에 정현파 전류를 공급하는 시스템에서, LC 소자를 추가함으로써 전압형 인버터의 VA rating을 줄일 수 있는 방법을 제안하였다. 전력제어용 스위칭 소자인 SCR은 대용량인 장점이 있는 반면에 턴오프 제어가 되지 않고, 비선형 특성으로 인해 고조파가 발생한다. 이러한 단점을 개선하기 위해 전압형 인버터를 사용하여, SCR를 OFF하고 부하에 정현파 전압/전류를 제공한다. 또한, 출력단에 수동 LC 필터를 추가하여 전압원 인버터의 VA rating을 저감시키는 구조를 연구하고 이를 Psim을 이용한 시뮬레이션을 통해 검증하였다.

• 한국조경학회지
• /
• 제26권2호
• /
• pp.91-100
• /
• 1998

This paper is to study on rating system of some shrubs for pedestrian control with concentrate upon the density of branch. It was usd that Hibiscus syricacus L., Spiraea prunifolia var. simpliciflora Nak, Ligustrum obtusifolium S. et Z., Callicarpa dichotoma Raeusch., Rhoododendron mucrionulatum Turcz., Syringa vulgaris L., Weigela subsessilis L. H. Bailey, Cercis chinensis bunge, Forsythia koreana Nak., Euonymus alatus Sieb, Chaenomeles speciosa Nak., orbaria sorbifolia var. stellipila Max., Deutzia parviflora Bunge, Kerria japonica De Candolle, Prunus tomentosa Thunberg ex Murray, Purunus grandulosa for. albiplena Koehne. Shrubs are invesitgated ito the density of branch, the power of sprout, height, a rate of growth, hardness of naturalizaton, crown width and existence of thorns. Shrubs belonged to high group of rating system for pedestrian control were Euonymus alatus Sieb, Purunus grandulosa for. albiplena Koehne, Chaenomeles speciosa Nak., Spiraea prunifolia var. simpliciflora Nak., Prunus tomentosa Thunberg ex Murray, Rhododendron mucronulatum Turcz., Hibiscus syricacus L., Ligustrum obtusifolium S. et Z., Syringa vulgaris L., Weigela subsessilis L.H.Bailey.

• Journal of Power Electronics
• /
• 제1권1호
• /
• pp.19-25
• /
• 2001

A high speed, three phase, 12/8 pole, 225 kW switched reluctance motor (SRM) has been designed and analyzed. A circuital approach has been used to find the geometry, windings parameters and electromagnetic loading. Then, the 3D finite element method (FEM) has been used to calculate the static torque more accurately and optimize the design. The efficiency of the designed SRM is almost constant over wide range of speed and its phase current is less sensitive to the speed than that of an induction motor of the same rating. Recommendations for manufacturers and users are given.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.1050-1052
• /
• 2000

An investigation into power conditioners that interface with photovoltaic array and utilities has been completed. The rating for this investigation is residential system (3-5kW) that interface with a 220V single phase utility connection. As the result of this investigation. a 3kW high frequency PWM IGBT inverter feeding a high frequency isolation transformer with a sinusoidal current wave was selected. The output of the transformer rectified with a diode bridge rectifier four IGBT, used as 60Hz switched, reverse the polarity of the rectified current on every other half cycle of the utility voltage. Even though the high frequency link system used more power semiconductors, a net size, weight, and parts cost saving result compared to the other systems due to elimination of 60Hz transformer.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.46-49
• /
• 2001

An investigation into power conditioners that interface with photovoltaic array and utilities has been completed. The rating for this investigation is residential system(3-5kVA) that interface with a 220V single phase utility connection. As the result of this investigation, a 3kVA high frequency PWM IGBT inverter feeding a high frequency isolation transformer with a sinusoidal current wave was selected. The output of the transformer rectified with a diode bridge rectifier. four IGBT, used as 60Hz switched, reverse the polarity of the rectified current on every other half cycle of the utility voltage. Even though the high frequency link system used more power semiconductors, a net size, weight, and parts cost saving result compared to the other systems due to elimination of 60Hz transformer.

• 전력전자학회논문지
• /
• 제9권4호
• /
• pp.326-333
• /
• 2004

본 논문에서는 Power-MOSFET를 통해 L및 C로 링크된 2조의 공진형 Full-bridge 인버터 회로를 다중 결합하여 대용량 전력변환장치의 소자에 인가되는 전압이나 부하전류를 분산 제어하는 기법을 제안하고 있다. 이 방식은 두 조의 인버터가 시분할로 구동되기 때문에 각 인버터의 독립된 출력이 부하단에서 합성되어 전력이 공급된다. 출력제어 기법은 시분할 합성법을 사용하고 이에 따른 인버터의 회로동작 모드를 분석하고 해석하였으며, 시뮬레이션을 통한 이론적 해석결과를 검정하고 이를 실험을 통해 비교 고찰하였다.