• 한국광학회:학술대회논문집
• /
• 한국광학회 2008년도 동계학술발표회 논문집
• /
• pp.139-140
• /
• 2008

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.593-594
• /
• 2010

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.323-323
• /
• 2013

High power light-emitting diodes (LEDs) are widely used in many device applications due to its ability to operate at high power and produce high luminance. However, releasing the heat accumulated in the device during operating time is a serious problem that needs to be resolved to ensure high optical efficiency. Ceramic or Aluminium base metal printed circuit boards are generally used as integral parts of communication and power devices due to its outstanding thermal dissipation capabilities as heat sink or heat spreader. We investigated the characterisation of electroless plating of Ni-B film according to plating bath temperature, ranging from $50^{\circ}C$ to $75^{\circ}C$ on Ag paste/anodised Al ($Al_2O_3$)/Al substrate to be used in metal PCB for high power LED packing systems. X-ray diffraction (XRD), Field-Emission Scanning Electron Microscopy (FE-SEM) and X-ray Photoelectron Spectroscopy (XPS) were used in the film analysis. By XRD result, the structure of the as deposited Ni-B film was amorphous irrespective of bath temperature. The activation energy of electroless Ni-B plating was 59.78 kJ/mol at the temperature region of $50{\sim}75^{\circ}C$. In addition, the Ni-B film grew selectively on the patterned Ag paste surface.

• Journal of Advanced Marine Engineering and Technology
• /
• 제40권2호
• /
• pp.96-101
• /
• 2016

The thermal management of high-power LED components in an assembly structure is crucial for the stable operation and proper luminous function. This study employs numerical tools to determine the optimum thermal design in LEDs with a heat sink consisting of a crevice-type vapor-chamber heat pipe. The effects of the MCPCB are investigated in terms of the substrate thicknesses on which the LEDs are mounted. Further, different placement configurations in a system module are considered. This study found that for a confined area, a power of 40 W/LED is applicable to a high-power package. Furthermore, the thermal conductivity of dielectric layer materials should ideally be greater than 0.9 W/m.K. The temperature conditions of the vapor chamber in a heat pipe greatly affect the thermal performance of the system. At an offset distance of 9.0 mm and a $2^{\circ}C$ increase in the temperature of the heat pipe, the resulting maximum temperature increase is approximately $1.9^{\circ}C$ for each heat dissipation temperature. Finally, at a thermal conductivity of 0.3 W/m.K, it was found that the total thermal resistance changes dramatically. Above 1.2 W/m.K, the resistance change reduces exponentially.

• 한국인터넷방송통신학회논문지
• /
• 제15권4호
• /
• pp.191-198
• /
• 2015

최근 에너지 절약과 친환경 조명에 대한 관심이 고조되면서 기존 광원보다 효율이 좋은 LED 조명에 대한 연구가 증가되고 있다. LED 조명은 타 조명에 비해 초절전, 친환경, 장수명으로 21세기에 적합한 조명이라고 할 수 있다. 본 연구의 목적은 기존의 LED 등기구 전원구동회로에 마이크로 컨트롤러 기반 볼트 레귤레이터를 이용한 전류 제어시스템을 장착하여 다양한 LED 등기구에 적합한 전류가변제어시스템을 개발하는 것이다. 이를 위해 가변저항과 보상저항을 이용하여 LED 순방향 전압값에 대한 영향이 최소화되도록 회로를 구성하여 안정적인 전원공급과 전류조정이 가능하도록 하는 전류가변제어시스템을 제안한다. 본 연구에서 제시한 마이크로 컨트롤러 기반 볼트 레귤레이터를 이용한 정전류 회로 및 이를 이용한 에너지 절감방법은 발광소자에 불필요한 발열을 최소화할 수 있고, 저항값을 세밀하게 조정할 수 있어 다양한 대용량 LED 등기구에 적용 가능하다. 본 연구는 궁극적으로 안정적인 전류 공급으로 LED 등기구의 신뢰성을 향상시킬 수 있을 것으로 기대된다.

• International Journal of Internet, Broadcasting and Communication
• /
• 제7권2호
• /
• pp.161-167
• /
• 2015

The performance of high power LEDs highly depends on the junction temperature. Operating at high junction temperature causes elevation of the overall thermal resistance which causes degradation of light intensity and lifetime. Thus, appropriate thermal management is critical for LED packaging. The main goal of this research is to improve thermal resistance by optimizing and comparing nano-pore silicon-based thermal substrate to insulated metal substrate and direct bonded copper thermal substrate. The thermal resistance of the packages are evaluated using computation fluid dynamic approach for 1 W single chip LED module.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2010년도 추계학술대회
• /
• pp.139-140
• /
• 2010

This paper presents an indoor prototype for wireless digital signal transmission using Visible Light Communications (VLC) in which high power Light Emitting Diode (LED) is used. Using low cost and off-the-shelf components, the transmitter module is constructed using an AVR Atmega128 microcontroller and commercial white beam LEDs. Modulating the light intensity of the LED enables digital signals to be transmitted across the optical link. The receiver module employs a high speed PIN photodetector for optical signal detection and a recovery circuit for optical-electro signal conversion. By sending digitalized data via VLC technology, many applications can be realized in the areas of consumer advertising, traffic safety information and disaster control.

• 한국광학회지
• /
• 제18권4호
• /
• pp.264-269
• /
• 2007

기존 필라멘트 방식의 루미나리에용 조명의 단점을 극복하기 위해 필라멘트를 LED로 바꾸기 위한 연구가 활발하게 진행 중이다. 본 연구는 루미나리에용에 적합한 LED패키지 구조를 만들기 위해 ray tracing simulator를 이용해 다양한 구조를 모델링하고 시뮬레이션을 통해 각 구조에서의 배광분포를 측정하였다. 시뮬레이션 결과, LED 패키지의 내부 반사경의 각을 증가시킬수록 배광분포가 두 개의 피크로 갈라지면서 피크간의 각이 점점 커졌다. 또한 외부 반사경 각이 증가함에 따라 양쪽 피크간의 각이 점점 줄어들다가 $50^{\circ}$를 기준으로 다시 증가하였다. 이러한 결과는 LED에서 발생한 빛이 두 개의 반사경에 의하여 반사되는 각도가 달라짐에 의하여 발생함을 알 수 있었다. Ray tracing simulator를 이용하여 구한 LED 패키지 구조의 조건을 적용하여 루미나리에용 LED패키지를 제작하였고 배광분포 측정기를 이용해 광 특성을 측정하였으며 시뮬레이션의 결과와 유사한 특성을 얻었다.

• 한국수산과학회지
• /
• 제41권6호
• /
• pp.511-517
• /
• 2008

The radiation characteristics and economic efficiency of high - luminance light - emitting diodes (LEDs), a metal halide lamp, and a halogen lamp were studied to evaluate their potential as an energy-saving light source for fishing lamps. The wavelengths at which irradiance was maximum were 709, 613, 473, 501, 525, 465, 578, and 973 nm for red, orange, blue, peacock blue, green, and white LEDs, the metal halide lamp, and the halogen lamp, respectively. If the irradiance characteristics at 300-1,100 nm wavelengths are set as 100%, the irradiance rates at 381-780 nm were 99-78%, 82%, and 24% for the LEDs, metal halide lamp, and halogen lamp, respectively. The economic efficiency was superior in the order metal halide lamp, halogen lamp, peacock blue LED, and blue LED at 381-780 nm and metal halide lamp, peacock blue LED, blue LED, and halogen lamp at 480-520 nm. Based on the radiation characteristics and economic efficiency evaluated at 480-520 nm, the blue and peacock blue LED light sources can be used as energy-saving light sources for fishing lamps.

• 조명전기설비학회논문지
• /
• 제27권2호
• /
• pp.84-94
• /
• 2013

In case when the existing TRIAC phase controlled dimmer is drove for the LED lighting equipments, there are many problems such as the LED flicker in low phase-angles, the acoustic noise and elements damage by increase of the peak voltage in the input filter capacitor, mulfunction by insufficiency of the TRIAC holding current, and the abnormal oscillation by LC resonant. In this paper, we proposes the single-stage quasi-resonant PSR(Primary Side Regulation) PWM converter, and the design, the simulation and experiment are performed. As a result, it could confirm that the proposed PWM converter is the lighting equipments for LED drive which can alternate the existing 60W class incandescent bulbs and it has the high drive performance of the efficiency 80% and over, the power factor 0.95 and over under the normal voltage 220V. Finally, total harmonic distortion(THD) is gratified with a standard[1] of the lighting equipments and the durability is evaluated as the high reliablilty of 150,000 hours and over.