• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 A
• /
• pp.156-158
• /
• 1993

This paper presents several techniques of power spectrum estimation for high impedance fault detection. High impedance faults are those faults with current too low to be reliably cleared by conventional overcurrent protection. So power spectrum estimation is required. AR and MA techniques require optimal order for good performance of power spectrum estimation because these techniques are unstable for order selection. ARMA and Extended techniches are stable for order selection and have very sharp response. So ARMA and Extended Prony techniques are suitable for our purpose.

• 한국콘텐츠학회논문지
• /
• 제11권8호
• /
• pp.475-487
• /
• 2011

본 논문에서는 고차원펄스의 스펙트럼을 유도하는 체계적인 방법을 제시하고, 이를 학습내용으로 하는 효율적인 이러닝 시스템을 설계한다. 고차원펄스의 스펙트럼은 연속미분법이나 콘볼루션법 등 기존의 방법에 의하여 유도될 수 있으나, 그 차수가 증가함에 따라 현저하게 높아지는 복잡도 때문에 사용할 수 없다. 우리는 고차원펄스의 차수에 따라 순환적으로 적용되는 알고리듬을 제시하고, 이를 찾아보기표에 의하여 함수적으로 차수에 연관된 스펙트럼의 식을 유도한다. 또한, 이를 이용하여 고차원펄스의 스펙트럼을 분석하는 과정을 학습하는 이러닝 콘텐츠를 설계한다. 여기에는 기존의 순차적 재생을 기본으로 하여 이른바 개념단위 오브젝트별 분기방식을 적용하는 콘텐츠 처리방식이 사용된다. 모델링, 임펄스응답과 전달함수, 파라미터, 찾아보기표 등 전체를 네 개의 개념단위로 분할한 콘텐츠페이지를 설계하고, 이들로부터 하향식으로 분화된 개념단위들을 모듈과 서브모듈로 설정한다. 이들은 개념단위 오브젝트별 분기방식에 의하여 학습자에게 다양한 학습순서와 반복학습 등을 제공하여 상호작용을 증대하고, 저작된 이러닝 콘텐츠에 의한 학습효과를 현저히 향상시킨다. 또한, 콘텐츠 자체의 효율성 측면에서도 현저한 향상을 이룬다.

• Journal of Radiation Protection and Research
• /
• 제41권2호
• /
• pp.93-99
• /
• 2016

Background: Industrial X-ray CT system is normally applied to non-destructive testing (NDT) for industrial product made from metal. Furthermore there are some special CT systems, which have an ability to inspect nuclear fuel assemblies or rocket motors, using high power and high energy (more than 6 MeV) pulsed X-ray source. In these case, pulsed X-ray are produced by the electron linear accelerator, and a huge number of photons with a wide energy spectrum are produced within a very short period. Consequently, it is difficult to measure the X-ray energy spectrum for such accelerator-based X-ray sources using simple spectrometry. Due to this difficulty, unexpected images and artifacts which lead to incorrect density information and dimensions of specimens cannot be avoided in CT images. For getting highly precise CT images, it is important to know the precise energy spectrum of emitted X-rays. Materials and Methods: In order to realize it we investigated a new approach utilizing the Bayesian estimation method combined with an attenuation curve measurement using step shaped attenuation material. This method was validated by precise measurement of energy spectrum from a 1 MeV electron accelerator. In this study, to extend the applicable X-ray energy range we tried to measure energy spectra of X-ray sources from 6 and 9 MeV linear accelerators by using the recently developed method. Results and Discussion: In this study, an attenuation curves are measured by using a step-shaped attenuation materials of aluminum and steel individually, and the each X-ray spectrum is reconstructed from the measured attenuation curve by the spectrum type Bayesian estimation method. Conclusion: The obtained result shows good agreement with simulated spectra, and the presently developed technique is adaptable for high energy X-ray source more than 6 MeV.

• Journal of the Optical Society of Korea
• /
• 제20권1호
• /
• pp.204-211
• /
• 2016

Oil pollution seriously endangers the biological environment and human health. Due to the diversity of oils and the complexity of oil composition, it is of great significance to identify the oil contaminants. The 3-D fluorescence spectrum combined with a second order correction algorithm was adopted to measure an oil mixture with overlapped fluorescence spectra. The self-weighted alternating trilinear decomposition (SWATLD) is a kind of second order correction, which has developed rapidly in recent years. Micellar solutions of #0 diesel, #93 gasoline and ordinary kerosene in different concentrations were made up. The 3-D fluorescence spectra of the mixed oil solutions were measured by a FLS920 fluorescence spectrometer. The SWATLD algorithm was applied to decompose the spectrum data. The predict concentration and recovery rate obtained by the experiment show that the SWATLD algorithm has advantages of insensitivity to component number and high resolution for mixed oils.

• Journal of the Optical Society of Korea
• /
• 제18권6호
• /
• pp.646-649
• /
• 2014

Performances of spectrum-sliced channels are strongly affected by their relative intensity noise (RIN). We use polarization-independent optical modulators (PIOMs) for spectrum-sliced channels to suppress their RIN. The PIOM driven by a high sinusoidal voltage signal evenly redistributes optical frequency components in the spectral domain and reduces the RIN. It can be used at a broadband light source (BLS) output to produce spectrum-sliced channels having lower RIN values. Also, it can be used for each spectrum-sliced channel within each optical network unit (ONU). In our experiment, where 12.5-GHz-spaced spectrum-sliced channels are used in 1-GbE speed, the use of PIOM at the BLS output reduces the bit error rate (BER) of the spectrum-sliced channel by more than an order of magnitude. The use of PIOM within the ONU reduces the BER by approximately 3 orders of magnitude.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2019년도 추계학술대회
• /
• pp.216-217
• /
• 2019

The battery powered electric vehicle (EV) is one of most promising technologies in 21^st century. Though the lithium batteries are playing an important role in the EVs, they are only applicable until their capacities reach 80%, the end of its useful first life. Yet, these batteries can live a second life such as Energy Storage Systems (ESS). In order to utilize the Residual Useful Life (RUL) of the batteries the State of Health (SOH) of them needs to be estimated by a nondestructive test such as Electrochemical Impedance Spectroscopy (EIS) technique. Though many kinds of different EIS instruments are commercially available, most of them can only test a battery module less than 10V and the price of the instrument is very high. In this paper a low-cost EIS instrument suitable for measuring the impedance spectrum of the high voltage battery module is proposed and its validity is verified through the experiments. In order to prove the accuracy of the developed EIS instrument its measured impedance spectrum is compared with the results obtained by a commercial instrument. The Chi Square value calculated between two impedance spectrum measured by both developed and commercial instruments are less than 2%, which prove the strong correlation between two results.

• 한국지진공학회논문집
• /
• 제27권1호
• /
• pp.69-75
• /
• 2023

In Korea, most nuclear power plants were designed based on the design response spectrum of Regulatory Guide 1.60 of the NRC. However, in the case of earthquakes occurring in the country, the characteristics of seismic motions in Korea and the design response spectrum differed. The seismic motion in Korea had a higher spectral acceleration in the high-frequency range compared to the design response spectrum. The seismic capacity may be reduced when evaluating the seismic performance of the equipment with high-frequency earthquakes compared with what is evaluated by the design response spectrum for the equipment with a high natural frequency. Therefore, EPRI proposed the inelastic energy absorption factor for the equipment anchorage. In this study, the seismic performance of welding anchorage was evaluated by considering domestic seismic characteristics and EPRI's inelastic energy absorption factor. In order to reflect the characteristics of domestic earthquakes, the uniform hazard response spectrum (UHRS) of Uljin was used. Moreover, the seismic performance of the equipment was evaluated with a design response spectrum of R.G.1.60 and a uniform hazard response spectrum (UHRS) as seismic inputs. As a result, it was confirmed that the seismic performance of the weld anchorage could be increased when the inelastic energy absorption factor is used. Also, a comparative analysis was performed on the seismic capacity of the anchorage of equipment by the welding and the extended bolt.

• Nuclear Engineering and Technology
• /
• 제55권12호
• /
• pp.4518-4526
• /
• 2023

NECP-SARAX is a neutronics analysis code system for advanced reactor developed by Nuclear Engineering Computational Physics Laboratory of Xi'an Jiaotong University. In past few years, improvements have been implemented in TULIP code which is the cross-section generation module of NECP-SARAX, including the treatment of resonance interface, considering the self-shielding effect in non-resonance energy range, hyperfine group method and nuclear library with thermal scattering law. Previous studies show that NECP-SARAX has high performance in both fast and thermal spectrum system analysis. The accuracy of TULIP code in fast and thermal spectrum system analysis is demonstrated preliminarily. However, a systematic verification and validation is still necessary. In order to validate the applicability of TULIP code for full energy range, 147 fast spectrum critical experiment benchmarks and 170 thermal spectrum critical experiment benchmarks were selected from ICSBEP and used for analysis. The keff bias between TULIP code and reference value is less than 300 pcm for all fast spectrum benchmarks. And that bias keeps within 200 pcm for thermal spectrum benchmarks with neutron-moderating materials such as polyethylene, beryllium oxide, etc. The numerical results indicate that TULIP code has good performance for the analysis of fast and thermal spectrum system.

• 방송공학회논문지
• /
• 제19권6호
• /
• pp.967-970
• /
• 2014

이 논문에서는 M-FSK(frequency shift keying) 변조신호를 자동으로 분류하는데 필요한 효율적인 첨두 검출 방법을 제안하였다. 다른 디지털 변조신호와 FSK 신호는 진폭 스펙트럼의 특성을 이용하여 분류할 수 있다. FSK 신호의 진폭 스펙트럼은 다른 디지털 변조신호와 다르게 변조차수와 동일한 수의 첨두를 나타낸다. 일반적으로 신호의 첨두를 검출하기 위해서는 임계치가 필요한데, 변조인식과 같이 사전에 신호에 대한 정보가 없는 경우 임계치를 정하기 어려운 점이 있다. 이 논문에서는 진폭 스펙트럼의 히스토그램을 이용하여 자동으로 간단하게 임계치를 결정하는 방법을 제시하였다. 모의실험 결과 적은 수의 표본과 잡음이 많은 환경에서도 매우 우수한 분류확률을 나타내었다.

• 한국ITS학회 논문지
• /
• 제9권6호
• /
• pp.113-119
• /
• 2010

애드 혹 네트워크를 구성하는 무선기기들은 일반적으로 소출력 기기로서 ISM대역을 사용하였다. 그러나 무선 서비스의 사용률이 급격하게 증가함에 따라 ISM대역의 주파수 부족현상이 나타나게 되었고 주파수 부족현상을 해소하기 위하여 애드 혹 인지무선시스템이 제안되었다. 본 논문은 소출력 무선기기로 구성된 애드 혹 무선인지 시스템에서 전력소모를 줄이면서 효과적으로 유휴주파수를 검출하기 위한 스펙트럼 센싱을 제안하였다. 본 논문에서 면허 사용자와 CR 기기 사이의 무선 채널은 가우시안 (Gaussian) 채널로 모델링 하였으며 모든 CR 기기와 면허 사용자와의 거리는 모두 다르다고 가정하였고, 애드 혹 네트워크를 구성하는 CR 기기간의 채널은 완벽한 (Perfect) 채널이며 거리는 근거리로 가정하였다. CR 기기는 에너지 검출 방식을 사용하여 면허 사용자의 스펙트럼을 센싱하였다. 실험결과 상위 레벨의 에너지 값을가진 CR 기기의 센싱정보를 결합한 센싱방법이 모든 CR 기기의 센싱정보를 결합한 센싱방법에 비하여 높은 스펙트럼 센싱 성능을 나타내었으며, 향후 제안된 스펙트럼 센싱 방법을 통해 저소비전력으로 효과적인 스펙트럼 센싱을 수행하는데 참조 할 수 있다.